Loading... Please wait...

Categories

BendPak HD-9SW 9,000-lb. Capacity Super Wide Car Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
BendPak
RRP: $8,830.00
$7,385.00 (You save $1,445.00)
SKU:
5175023
Availability:
Usually ships in 48 Hrs
Shipping:
Free Shipping

 Product Description

 
bendpak-authorized-dealer.gif
BendPak 9,000 LB  4-Post Lift HD-9SW  Extra Wide
The HD-9SW is the DIYer's ideal double-vehicle storage and service solution. Store two vehicles on four runways. Available with casters, drip-trays, jack platform and more.

 

*9,000-pound lifting capacity 
*206" Wide
*Overall Lenght 200"
*Height of Colums 88"
*Lenght of Run Ways 164"
*Max Rise 70"
*Lifting Time 55 sec.
*Motor 220 VAC/1 Ph

pdf.catalog.jpg  pdf.instructions.jpg    ali-etl-logo.jpg5-2-1-warranty.jpg

 Four-Post Lifts by BendPak

HD-9SW

SKU# 5175023

9,000-lb. Capacity / Four-Post Lift / Dual Platform / Super Wide


To accommodate super-wide vehicles on a 9,000-lb. capacity four-post lift, choose the HD-9SW. The “SW” stands for super-wide, and it’s the ideal four-post lift to double your parking and/or service wider vehicle types.

9sw.jpg

Capacity

Lifting Capacity*9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:7" (178 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:77" (1,956 mm)
Time to Full Rise:55 seconds

Outside Dimensions

D - Overall Width:202" (5,131 mm)
E - Outside Length:174" (4,420 mm)
F - Overall Length:200" (5,080 mm)
G - Height of Columns:90" (2,286 mm)

Inside Dimensions

H - Width Between Columns:192" (4,877 mm)
I - Drive-Thru Clearance:178" (4,521 mm)

Runways

J - Runway Width:19" (483 mm)
K - Length of Runways:164" (4,166 mm)
L - Width Between Runways:37" (940 mm) or 42" (1,067 mm)
M - Runway Centerline:56" (1,422 mm) or 61" (1,549 mm)
N - Outside Edge of Runways:75" (1,905 mm) or 80" (2,032 mm)

Minimum Wheelbase

Rated Capacity:115" (2,921 mm)
75% Capacity:100" (2,540 mm)
50% Capacity:85" (2,159 mm)
25% Capacity:70" (1,778 mm)

Locking

Locking Positions:14
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz /1 Ph
Noise:45 dB

Shipping

Weight:2,892 lbs. (1,315 kg)
Dimensions:204" x 24" x 42" (5,182 mm x 610 mm x 1,067 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 

Features

  • Standard rise
  • Shorter runway for smaller spaces
  • Runways accommodate wide or narrow vehicles
  • Runways include rail kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Oversized sheave diameter reduces cable fatigue
  • High-speed lifting
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Inside runways adjust for different tread widths
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available
  • Take Home a Super-Wide ​Four-Post Lift

    There are thousands of vehicle types out there, and some come a bit wider than others. That’s no sweat for the HD-9SW, a four-post lift that sits fat and happy when it holds vehicles with wider frames. Plus, if you need a lift that offers truly gigantic proportions, the HD-9SWX is one heck of a choice. If your vehicles are tall, heavy and wide, and they need to be stacked or serviced, we can probably lift them. Both models are perfect for a “wide” range of vehicles.

    With all the same great parts and components as the HD-9, our super-wide lift is equally safe and efficient. Check out the working parts and components below to see what makes a BendPak better than the rest, no matter what height/width modifications we make for your pleasure and convenience.

    Dual-hub cable sheaves

    Single-hub cable sheaves represent the cost-cutting way to make a car lift. Not our way. BendPak double-hub sheaves reduce friction against the cables while also extending the life of the lift axles.

    Multi-level locking positions

    Multiple lock positions permit operators to safely stop the lift at the right height for them, or simply adjust to the right height for the job. This is also useful for parking vehicles under the raised lift. Depending on the height of your vehicle(s), and depending on your ceiling height, you can adjust the lock position.

    Heavy-duty aircraft cable

    Four lifting cables help ensure a level rise. Each is constructed from high-grade stainless steel and rated to handle 14,000 lbs. Combined, the four cables can hold 640% more than this four post lift’s rated capacity. Of course, the cables are tucked away into the lift structure. This streamlines the lift design and maintains the sleek look of your shop. It also protects the cables from environmental damage, spills, etc.

    Electric-hydraulic power system

    The electric-hydraulic power system is totally maintenance-free. Controls are ergonomically placed and easy to use, so you’re totally at ease while operating the lift.

    Large base plates

    10" x 12" base plates can be bolted down or left unbolted for use with the caster kit. We encourage you to work in a way that’s best for you.

    Caster kit

    A 4-piece caster kit fits this super-wide four-post lift like a charm. With your lift on wheels, there’s no limit to where you can work and park. Remodeling projects are also easier to plan and execute.

    Integrated design

    All moving components are located within the structure. This isn’t just about looks (although it certainly helps with that too). The integrated design addresses a major safety concern: externally routed components are exposed to additional dangers and damages. BendPak avoids these altogether.

    Low-deck runways

    The runways on this BendPak four-post lift rise just 4.5" off the ground. Add the gently inclining ramps, and you can lift virtually anything.

    Longer approach ramps

    Not only are our runways low-profile, we extend them farther than others in the industry. This makes for a car lift that can load sports cars and other low-standing vehicles without damaging them.

    Automatic safety locks

    Engaging the locks is as simple as raising the ramps just past the lock (you’ll hear it click as it passes) and lowering them back on the lock. Check to make sure all locks are on the same position—safety first, after all. And that’s all there is to it! Your four-post lift can be held in that position indefinitely.

     

     
  •  

 Product Videos

Lotus Elise on BendPak HD-9
  • Lotus Elise on BendPak HD-9
    http://www.bendpak.com/car-lifts/four-post-lifts/HD-9.aspx The...
  • caster.flv
    BendPak Caster Kit For HD-9 Sereis LIfts

 Warranty Information

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HD-9SW 9,000-lb. Capacity Super Wide Car Lift to your wish list.