Loading... Please wait...

Categories

Bendpak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
BendPak
RRP: $3,820.00
$3,195.00 (You save $625.00)
SKU:
5175120
Weight:
1,942.00 LBS
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points
 

Lifting capacity: 7,000 lbs.
Overall width: 116-3/4"
Overall length: 189"
Height of columns: 100"
Max rise: 82"
Length of runways: 164"
Motor: 220 VAC / 1 Ph

   pdf.catalog.jpg   pdf.instructions.jpg     ali-etl-logo.jpg

  •  

     

     

    Description

     

    The space saving HD-7W four-post lift provides high lifting with shorter runways and extended drive-thru clearance to accommodate wider vehicles. The HD-7W car lift maximizes valuable floor area and turns your garage parking space or carport into the perfect storage and service area for cars and trucks, ATVs, snowmobiles, jet skis, golf carts, boats, or just about anything else that needs to be off the ground. If you've got at least a standard 8-foot ceiling, you'll be able to make use of that wasted vertical space above your car. An optional caster kit allows you to roll the lift outside or wherever best suits your needs.

     

    Dependable design
    4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

     

    Dual-hub cable sheaves
    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

     

    Multi-level locking positions
    The HD-7W is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

     

    Heavy-duty aircraft cable
    Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

     

    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

     

    Large base plates
    10" x 12" base plates provide a solid foundation for the HD-7W.

     

    Single hydraulic cylinder
    Leak proof cylinder technology only available for BendPak four-post lifts 
    Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-design high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

     

    Durable powder-coat finish
    All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

     

    Integrated design
    Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

     

    Low-deck runways
    Our low 4-1/2" runways accommodate even the lowest cars.

     

    Longer approach ramps
    These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

     

    Automatic safety locks
    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a s

     

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak viacontact@bendpak.com.

    lack-cable device to engage in the unlikely event of cable failure.

     

     

     

      • 7,000-lb. maximum lifting capacity
      • Wide drive-thru with tall lifting height and short runways
      • Runways include rail-kit for optional accessories
      • Electric / hydraulic power system
      • Single hydraulic cylinder mounted underneath runway
      • Internal anti-sway slider blocks in each column
      • Oversized self-lubricating cable rollers
      • Features heavy-duty 3/8" aircraft cable
      • Rugged 1-1/4" roller axles
      • Multi-position safety locks in each column
      • Adjustable lock ladders
      • Ramps feature non-skid surface
      • Push-button pneumatic safety release
      • Optional 4,500-lb. capacity rolling jack available (Model RJ-45)

        floorplan2.jpg


    Best Warranty Car Lifts - BendPak

    Will your four-post car lift fit?

    Safe balancing for BendPak car lifts

    How to choose the right car lift for you

         



    BendPak's Top 10 Car Lift Buyers Guide


     

    • Lifting capacity*: 7,000 lbs. / 3,175 kg
      • *Max capacity / front axle: 3,500 lbs. / 1,588 kg
      • *Max capacity / rear axle: 3,500 lbs. / 1,588 kg
    • Overall width: 116-3/4" / 2,965 mm
    • Outside length: 174" / 4,420 mm
    • Overall length: 189" / 4,801 mm
    • Height of columns: 100" / 2,542 mm
    • Runway min height: 4-1/2" / 114 mm
    • Max rise: 82" / 2,083 mm
    • Max lifting height: 86-1/2" / 2,197 mm
    • Width between posts: 106-3/4" / 2,711 mm
    • Runway width: 19" / 482 mm
    • Min width between runways: 37-1/4" / 946 mm
    • Max width between runways: 44" / 1,118 mm
    • Length of runways: 164" / 4,166 mm
    • Min wheelbase @ rated capacity: 115" / 2,921 mm
    • Min wheelbase @ 75% capacity: 100" / 2,540 mm
    • Min wheelbase @ 50% capacity: 85" / 2,159 mm
    • Min wheelbase @ 25% capacity: 70" / 1,778 mm
    • Locking positions: 15
    • Lock spacing: every 4" / 102 mm
    • Lifting time: 45 sec
    • Motor: 220 VAC / 60 Hz / 1 Ph

     

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

     

     

 Warranty Information

BendPak WARRANTY
BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak X-Rack Scissors Lifts are warranted for 18 months
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Low-Rise Lifts and Rolling Jacks are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak MCL Mobile Column Lifts are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tubing Benders are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Motors, hydraulic cylinders, valves, switches and all other assembly components and tooling are warranted for one year against defects in material or workm anship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tri-Max Series Air Compressors are warranted for five years
on the compressor tank, two years on the compressor pump and one year on the electric motor and all other assembly components such as valves and switches against defects in material or workmanship under normal use. The five-year tank warranty will apply to ASME air receivers only if they are installed on rubber anti-vibration pads or approved equivalent. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

These warranties do not extend to...
defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance;
damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) and/or other accompanying instructions supplied;
normal wear items or service normally required to maintain the product in a safe operating condition;
any component damaged in shipment;
•other items not listed but may be considered general wear parts;
damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear parts. BendPak reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Bendpak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift to your wish list.