Loading... Please wait...

Categories

BendPak 4 Post Car Lift 9,000-lb. Capacity HD-9

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
BendPak
RRP: $3,520.00
$2,945.00 (You save $575.00)
SKU:
5175861
Availability:
Usually ships in 24 Hrs.
Shipping:
Free Shipping

 Product Description

 

bendpak-authorized-dealer.gif
BendPak 9,000 LB  4-Post Lift HD-9 Standard Width
The HD-9 is your rugged, 9,000-lb. lifting solution. Perfect for vehicle storage and service—at the shop or in the garage. Whether you’re a service professional or a DIY’er, BendPak’s got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more.

 

rj45-2-87441.1409993791.1280.1280.jpg

 

    Click here for Optional Rolling Bridge Jacks

 

 

*9,000-pound lifting capacity 
*117" Wide
*Overall Lenght 200"
*Height of Colums 88"
*Lenght of Run Ways 164"
*Max Rise 70"
*Lifting Time 45 sec.
*Motor 220 VAC/1 Ph

pdf.instructions.jpg  pdf.catalog.jpg    5-2-1-warranty.jpg

 

 

Four-Post Lifts by BendPak

HD-9

SKU# 5175861

9,000-lb. Capacity / Four-Post Lift / Standard Width


The HD-9 series of 9,000-lb. four-post lifts contains seven different lifting models. Each four-post lift is perfect for vehicle storage and service, whether you’re working at the shop or your home garage. Each model is available with optional casters, drip trays, jack platforms and more.

 

Meet One of Our Most Popular and Versatile Lifts

A four-post lift requires a serious level of engineering. To reduce strain on the columns and provide ample lifting security at all times, BendPak uses the most durable stainless steel lifting cables, as well as the single hydraulic cylinder, to provide an incredibly powerful and smooth lift operation. With proper use, this car lift will work as well on day 5,000 as it does on day one.

The HD-9 offers our largest variety in any BendPak four-post lift weight class because most vehicles serviced by most shops weigh less than 9,000 lbs. If you need to lift heavier vehicles, we have larger-capacity models that keep you covered. For many of you, however, the HD-9 Series will hit the sweet spot for powerful lifting, compact design and product value. Browse our 9K section to see all of what you can get on these models.

Dual-hub cable sheaves

Dual-hub cable sheaves are more expensive to manufacture, but it’s not a cost we push back onto you. They’re necessary to prevent axles, sheaves and cables from burning out before they should. Our philosophy is that your lift should be the last thing you worry about first thing in the morning.

Multi-level locking positions

Unique service technicians require unique servicing positions; with the HD-9, you can safely lock your four-post lift at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the lift for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.

Heavy-duty aircraft cable

Each four-post lift comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 14,400 lbs. This makes their combined rating over 640% of the total capacity. These cables are hidden within the post columns for both the safety and overall streamlined look of the lift. No one wants to see a cable dangling on the outside of a lift. Tuck that thing away!

Electric-hydraulic power system

No need to worry about maintenance on your electric-hydraulic power systems! The controls are all within reach, so you can stop, start and reverse your four-post lift on a dime.

Large base plates

10" x 12" base plates keep your car lift rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!

Caster kit

Ask us about the 4-piece caster kit that fits all our 9K four-post lifts. They turn your stationary lift into a mobile parking and service station. You can even leave a car on top while you move it!

Integrated design

All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. This is a crucial safety feature that also adds significantly to your lift’s curb appeal! (That is, if you have it visible from the curb.)

Low-deck runways

We keep our four-post runways to a low 4.5", so low-stance chassis can be comfortably driven onto the lift.

Longer approach ramps

Not only are our runways low, we extend them farther than others in the industry. This better suits the lifting of sports cars and other low-standing vehicles.

Automatic safety locks

Every BendPak four-post lift is designed with a safety-first mentality. To this end, four locks engage simultaneously as the lift is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.

hd9.jpg

Capacity

Lifting Capacity*9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:4.5" (114 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:74.5" (1,892 mm)
Time to Full Rise:45 seconds

Outside Dimensions

D - Overall Width:110.25" (2,800 mm)
E - Outside Length:174" (4,420 mm)
F - Overall Length:200" (5,080 mm)
G - Height of Columns:88" (2,235 mm)

Inside Dimensions

H - Width Between Columns:100.25" (2,546 mm)
I - Drive-Thru Clearance:86.5" (2,197 mm)

Runways

J - Runway Width:19" (483 mm)
K - Length of Runways:164" (4,166 mm)
L - Width Between Runways:37.5" (953 mm) or 44.375" (1,127 mm)
M - Runway Centerline:56.5" (1,435 mm) or 63.375" (1,610 mm)
N - Outside Edge of Runways:75.5" (1,918 mm) or 82.375" (2,092 mm)

Minimum Wheelbase

Rated Capacity:115" (2,921 mm)
75% Capacity:100" (2,540 mm)
50% Capacity:85" (2,159 mm)
25% Capacity:70" (1,778 mm)

Locking

Locking Positions:12
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 

Features

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

 Product Videos

BENDPAK 4 POST LIFT HD-9 CASTER KIT REVIEW
  • BENDPAK 4 POST LIFT HD-9 CASTER KIT REVIEW
    To see more tool reviews, and participate in workshop discussi...
  • Lotus Elise on BendPak HD-9
    http://www.bendpak.com/car-lifts/four-post-lifts/HD-9.aspx The...
  • BendPak RJ-45 Rolling Bridge Jacks for HD-9 Four Post Lifts
    To see more tool reviews, and participate in workshop discussi...

 Warranty Information


Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak 4 Post Car Lift 9,000-lb. Capacity HD-9 to your wish list.