Triumph NT-11 11,000LBS Two Post Automotive Base Plate Lift
- Usually ships in 24 Hrs
- Free Shipping
Triumph NT-11 - 11,000LBS TWO POST AUTOMOTIVE BASE PLATE LIFT
Shipping fees apply to certain area's, see below:
Add $200 for first Lift and $100 for each additional Lift on same order and shipping address for Lifts shipping to: NYC (Manhattan, Bronx, Staten Island, Brooklyn, Queens and Long Island.
Add $200 for first Lift and $100 for each additional Lift on same order and shipping address forLifts shipping to: Section of California from Monterey/Salinas across the border of Nevada and everything in California north of this line and all of State of Oregon and Washington.
No free shipping to the following destinations: Islands in Seattle/Tacoma area, Great Lakes, Martha's Vineyard/Nantucket, Islands off Long Island, Islands off the coast of North/South Carolina and Georgia and Florida's Key Largo to Key West.
Add $160 for shipping to the States of ND, SD and MT.
Triumph Lifts come with a 1 year parts warranty, no labor. You simply call us, we toubleshoot the problem over the phone with you, we ship you the part needed to fix the problem free of charge, the part is free and shipping is free. The free shipping is ground service. We do not cover labor costs for someone to install the replacement part, you must do this yourself or pay someone to do it but most of the time it is very easy for a car mechanic to do themselves. We do not cover the rubber lifting pads, and the cylinders come with a 30 day full warranty and after 30 days we provide a seal kit.
Standard 1 year parts 5 year structure warranty.
These rugged and versatile lifts are engineered and manufactured to the highest quality standards to provide you years of trouble free service. ISO 9001 and CE Certified/Compliant.
Triumph 11,000 LB 2 Post above ground lifts should be installed on a concrete floor with a minimum rated 4000 PSI strength. Free mounting hardware, free truck adapters.
Capacity 11,000 lbs.
Overall Height 116"
Overall Width 138"
Distance Between Posts 112"
Drive Through Width 102"
Lifting Height 72"
Lowered Height 4.5"
Base Plate 17 x 20 (6 Anchors Each Side)
Height Adapters 1-1/2, 3", 6" included
Motor 3HP 220V 60HZ
Finish High heat powder coating
Shipping Weight 1395 lbs.
Lifts come with free set of Truck adapters (Height Adapters 1-1/2, 3", 6" included) and floor Anchors (6 Anchors Each Side)
Firstly, ordering and delivery couldn't have been easier. Pricing on this site was the best on the internet at the time, regardless - in hindsight, I would have paid more for the prompt, courteous sales, processing, shipping, updates and delivery. Upon delivery its shipped in two angle iron frames with fork slots, sort of [========] laying flat. I used my 75 hp tractor loader with 5500 lb 60" forks to remove from back of truck, laying down lengthwise, it was quite a load as lifting from one end, tail wagging the dog almost, might be a challenge unless one dragged it out of the truck to get from side. Installation, super sweet, easy, everything you would need is 45 dollars at local harbor freight service for drilling concrete, if you need a couple of wrenches, that is an extra 5 bucks! Filling from five gallon bucket with hand pump went smoothly. Fired it up and away it went, very smooth. As this is about my 6th personal hoist and hundreds I have used, I noticed all the little nuances seemed to be addressed. Very wide drive through section, my equipment passes the uprights easily, car and truck doors are no issue - makes it less an obstacle when not using! Arm locks, I've seen so many bend the cogged arm lock frame back making them useless, whereas they beefed these bad boys up, you'll not be disabling them by retracting the arm too hard and bending the brackets, they are really stout! Lift spacers, got to love the style, they give you plenty included, no add on stuff to buy, if you can't rig to what your lifting with provided spacers, it won't be because they weren't included. Documentation was lacking, however quick internet search provided the needed docs, could have been torn off during delivery, regardless - five minute search. Pump is healthy and tank is steel, not a hunk of plastic waiting to get torn off. Pump location is on the backside of main upright instead of on backside, I have walked into my share of pumps and thought to myself - what moron... All said, if I had 10 bays, 8 of them would have these lifts. The base plate open top requires a bit more thought on your concrete requirements and that should be kept in mind. Close top units seem to carry more structure above ground adding stability, however novices should never be allowed to use them without appropriate stands, common sense is not included in the hardware box! Awesome lift, company and finished product