null
ATLAS

Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift

Write a Review
SKU:
ATEXH-PSP-6000-FPD
XH-PSP-6000
Availability:
FACTORY SHIPPED
Shipping:
Calculated at Checkout
On Sale
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
  • Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift
$4,999.00
$4,799.00
$4,999.00
— You save $200.00

Description

 

logo-atlas-equipment.gif

Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift

The Atlas PSP-6000 portable single post lift is the perfect choice for the commercial service shop or the Mr. Homeowner who does not want to tie up a bay space with a permanently mounted above ground lift. This portable vehicle lift allows the operator to walk under the vehicle or move around the vehicle to perform wheel service. When the Atlas PSP-6000 is not in use, it may be rolled out of the way into a corner. The PSP-6000 also has a built-in ramp allowing vehicles to drive over it, further maximizing garage space. 

The Portable Single Post Lift rolls easily on a level concrete surface and can be used either inside or outside of your garage. The column fits under a 9 foot (108 inch) ceiling and allows the operator to raise most vehicles high enough to access many parts of the vehicle that would not be accessible with a mid-rise lift. 

The Atlas PSP-6000 column is equipped with the chain break mechanism that automatically locks the carriage into place in the unlikely event of a chain failure.

 

Features Information

  • 2 Year Structural 2 Year Hydraulic Limited Warranty
  • PSP-6000 Ramp
  • Single Post Secondary Lock System (SLS)

 

  • 6,000 lb Capacity
  • Portable
  • Lifting Height: 5' 11 2/3" (71 2/3")
  • Voltage: 110v Single Phase
  • Includes 8 Screw-Up Truck Adapters
  • 2 Year Structural, 2 Year Hydraulic Limited Warranty

 

2-1silver.gifpdf.instructions.jpg

 

 

Atlas® PSP-6000 - 6,000 lb. Portable Single Post Lift Specifications
Overall Height 102 3/4" (8' 6 3/4")
Max. Lifting Height (Without Truck Adapters) 71 2/3" (5' 11 2/3")
Max. Clearance 68" (5'8")
Min. Height 5"
Overall Maximum Dimensions L: 111 1/2” x W: 96" x H: 102 3/4”
Column Size 10 1/2" x 12 1/2"
Distance Between Lifting Pads (Column Side to Offside) 39 1/2" - 81"
Distance Between Lifting Pads (Column Side to Column Side) 53" - 73"
Distance Between Lifting Pads (Offside Side to Offside) 54 1/3" - 91 1/2"
Locking Positions 16
Motor 110v single phase
Shipping Weight 1900 LB
View AllClose

Warranty Information

ATLAS Equipment Sales offers a two year LIMITED structural parts warranty on all Atlas Lifts. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of . Our LIMITED warranty policy (two year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined. Our wheel balancers are built with “plug and play” parts that make repairs very easy. This is the same philosophy that the Personal Computer Industry has used for many years. We offer a toll free number (800-768-4104) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians. There are certain parts that are considered “wear items” and are NOT included in the one year warranty. Parts that have been subjected to abuse will NOT be considered for warranty. REPEAT: IF YOU ABUSE YOUR WHEEL BALANCER (LIKE PLUG A 110 VOLT CORD INTO A 220 VOLT OUTLET, USE YOUR WEIGHT HAMMER INSTEAD OF YOUR FINGERS TO ENTER PARAMETERS INTO THE KEYPAD, OR DRIVE YOUR CAR INTO THE SIDE OF THE BALANCER AND BEND THE SHAFT) THEN THE WARRANTY ON YOUR BALANCER IS VOID. If you think that a wheel balancer should perform flawlessly for many years WITHOUT a normal amount of maintenance; then do not buy our wheel balancer. You are living in a fantasy world. Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process. Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties. Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers. If you have any questions about our products or warranties, please ask your sales representative.
View AllClose

0 Reviews

View AllClose