null
  Loading... Please wait...

Categories

Atlas® 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift (2 height settings: 11' 6" or 11' 10")

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
ATLAS
RRP: $2,450.00
$2,095.00 (You save $355.00)
SKU:
XH-9KOHX
Availability:
Usually ships in 48 Hrs
Shipping:
Free Shipping
Commercial address and I have a Fork Lift:
Residential address and I have a Fork Lift:
Pls. drop off at a freight terminal:

 Product Description

 

logo-atlas-equipment.gif
Atlas® Atlas® 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift

The Atlas® 9KOH is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price. The Atlas® 9KOH can be adjusted to two different height settings: 11' 6" or 11' 10". 

Atlas has a state of the art above ground lift testing facility in Indianapolis, In. We test our competitors’ lifts and our Atlas® liftsGET SERIOUS…GET ATLAS®. 

The Atlas® 9KOH has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks. 

The Atlas® 9KOH includes: a complete set of solid peg type truck adapters, mounting hardware, a set of sliding lift point adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side). 

The Atlas® 9KOH two post “chain over roller” lifts have a spring loaded Secondary Lock System (SLS) that automatically engages in the event of a slack or broken chain. 

    • 2 Post Secondary Lock System
    • Free 8 Piece Truck Adapter Set
    • Atlas® 9KOH Documented Load Test
    • Asymmetric/Symmetric Arm Design
    • Automatic Arm Restraint
    • Chain-Over-Roller Cylinder Configuration
    • Dual Point Lock Release
    • Electrical Requirements
    • Overhead Configuration
    • Model - 2/2 Year Warranty

 

pdf.instructions.jpg2-1silver.gif

Atlas® 9KOH Specifications  
Capacity 9,000 LB.
Lifting Time Ask Your Salesperson
Overall Height 142" (11' 10") or
138" (11' 6")
Overall Width 141" (11' 9") (With Power Unit)
134 ¼" (11' 2 ¼")
Outside Column To Outside Column 124 5/8" (10' 4 5/8")
Maximum Lift Height
(Without Adapters)
74" (6' 2")
Maximum Lift Height
(With Adapters)
80 ¼" (6' 8 ¼")
Padded Bar Height 136" (11' 4") or
132" (11')
Minimum Arm Height 4"
Inside Column 109 ¾" (9' 1 ¾")
Column Size 7 ¼" x 11 ?"
Drive Thru
Symmetric/Asymmetric Arm Configuration
100" (8' 4")
90 ½" (7' 6 ½")
Base of Lift 13 ½" x 18"
Column Thickness of Steel 5mm
Carriage Thickness of Steel 6mm
Arms Thickness of Steel 6mm
Cable Diameter .375"
Motor/Electrical Requirement 220V single (1) phase.
A 30 amp breaker is required.
Oil Requirement 3-5 Gallons AW32/AW46
Shipping Weight 1,450 LB.
Requires a minimum of 4" of concrete with 3000 psi.

 Warranty Information

ATLAS Equipment Sales offers a two year LIMITED structural parts warranty on all Atlas Lifts. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of

.

Our LIMITED warranty policy (two year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined.

Our wheel balancers are built with “plug and play” parts that make repairs very easy. This is the same philosophy that the Personal Computer Industry has used for many years.



We offer a toll free number (800-768-4104) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians.

There are certain parts that are considered “wear items” and are NOT included in the one year warranty. Parts that have been subjected to abuse will NOT be considered for warranty.

REPEAT: IF YOU ABUSE YOUR WHEEL BALANCER (LIKE PLUG A 110 VOLT CORD INTO A 220 VOLT OUTLET, USE YOUR WEIGHT HAMMER INSTEAD OF YOUR FINGERS TO ENTER PARAMETERS INTO THE KEYPAD, OR DRIVE YOUR CAR INTO THE SIDE OF THE BALANCER AND BEND THE SHAFT) THEN THE WARRANTY ON YOUR BALANCER IS VOID.

If you think that a wheel balancer should perform flawlessly for many years WITHOUT a normal amount of maintenance; then do not buy our wheel balancer. You are living in a fantasy world.

Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process.

Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties.

Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers.

If you have any questions about our products or warranties, please ask your sales representative.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2020 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Atlas® 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift (2 height settings: 11' 6" or 11' 10") to your wish list.