Loading... Please wait...

Categories

Ranger DST642D 2-D Quick-Touch™ Wheel Balancer with 36mm Shaft

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
Ranger
RRP: $2,610.00
$2,180.00 (You save $430.00)
SKU:
5140305
Shipping:
Free Shipping

 Product Description

 

Image 1

ranger.dealer.jpg
DST642D Digital Wheel Balancer with DataWand™ Entry
The Ranger The Ranger DST642D wheel balancer offers some of the fastest floor times of any balancer ever made. Our exclusive Drive-Check™ technology automatically measures imbalances, so you can confidently ensure minimal weight placements will be used to achieve a perfect balance on the first spin. Wheel offset is automatically registered when the offset ruler is extended, saving

FREE SHIPPING!  
(contiguous 48 states)


pdf.catalog.jpg  pdf.instructions.jpg5-2-1-warranty.jpg

 

 

 Wheel Balancers by Ranger

DST642D

SKU# 5140305

Wheel Balancer / 2D Quick-Touch™ / Drive-Check™ / 36 mm Shaft


The Ranger DST642D wheel balancer offers some of the fastest floor times of any wheel balancer machine ever made. Our exclusive Drive-Check™ technology automatically measures imbalances, so you can confidently ensure minimal weight placements will be used to achieve a perfect balance on the first spin. Wheel offset is automatically registered when the offset ruler is extended, saving precious time.

 

Get Drive-Check™ and 2D Quick-Touch™ Wheel Balancer Technology

Ranger Drive-Check technology makes it easier to automatically measure rotational imbalances. The Drive-Check program activates a driving simulation during all balancing modes, measuring imbalances through simulated real-world road conditions. This means our wheel balancer technology prepares operators to perfectly balance the tire and wheel assembly with absolute confidence that the wheel balancer will get it right the first time.

Highly precise digital sensor technology

Our Digital Sensor Technology is the “DST” in DST642D, and it’s crucial to our wheel balancer engineering. The 64-bit, single-bit chip tech makes for speedier and more accurate balances. This permits operators to use a variety of balance and weight placement techniques for OEM and aftermarket tire/wheel configurations.

By using a single 64-bit chip, the DST642D wheel balancer ensures a more stable balance, and processing speeds are significantly improved. With less hardware involved, there’s less maintenance to worry about over time. The dedicated hyper-transport protocol lets data “talk” with the micro-processor with much less delay, meaning less power is consumed. The internal components of the wheel balancer run at lower temperatures, further extending the life of the unit and improving performance.

Serpentine poly-V belt features a polyester-aramid fiber composite core to resist degradation of functional performance under extreme operating conditions. Poly-V belt mates perfectly with the motor and spindle sheave for continuous tension and distribution.

(1) Dynamic, (2) static, (1) standard alloy and variable alloy setting that enables you to select the exact weight placement location you choose for the specific wheel being serviced. Easily configured with the simple push of a button for a variety of wheel styles and designs.

Multi-directional quartz piezoelectric load sensors

Dual-component piezoelectric quartz load sensors combine with a single digital rotation encoder to record longitudinal, transversal and shear effects for multi-directional force unbalance detection. These sensors are extremely precise for greater stability, as well as reduced wheel balancer fatigue. The high-rigidity quartz crystal sensors mean higher frequency (aka faster, more accurate) detection for all tire/wheel assembly measurements.

Automatic wheel data entry

Our simple, easy-to-use inner data set arm allows you to quickly and automatically enter offset distance of the wheel assembly. The wheel width and diameter measurements can be manually taken and entered in seconds.

User-friendly operation

Durable soft-touch keys complete a user-friendly display panel that features tire and wheel graphics for faster entry of wheel data. The step-by-step interface takes minimal training to master, as the wheel balancer has big, bright icons that indicate each balancing function. Additionally, when any wheel is rolled top-dead-center, the LED display will light up and an alarm will sound. Hidden or behind-the-spoke weight placement techniques are assisted by tiered weight placement indicators.

Inner wheel target lighting

The wheel balancer features a long-lasting LED inner wheel target light, which lights up the interior of the rim and identifies the best place to place weights. The light automatically activates when the wheel restraint pedal is engaged.

Multi-directional, anti-glare control panel

A fully adjustable control panel minimizes sunlight glare and makes all wheel balancer operations (and ultimately your shop) more productive. The display can be moved in all directions to compensate for sunlight, overhead light fixture glare or user height/preference. Light diffuses off the screen to make readouts more visible—no more painful glare!

Quick and precise setup

Several center cones, a rear-mounted spring and a non-marring “Quick-Nut” bell adapter assist in all wheel mounting procedures. They also protect wheels against costly scratches, dings and other damages.

Automatic weight optimization

The DST642D automatically detects the minimum amount of weight needed to achieve an optimum balance, so you’re never “chasing” weights (a waste of time and money). The increased accuracy and efficiency of weight placement readouts make this wheel balancer worth every penny.

Tape weight feeder

Ranger’s Quick-Peel™ adhesive sits conveniently in a side shelf and features an easy-to-use open-top design for fast access. Bulk rolls are available for restocking at any time.

Standard accessories and mounting cone package

The DST642D tooling package now comes with a medium-duty truck cone, in addition to the standard car and light truck cones. The four-piece cone set includes the following sizes: 1.75”-2.75”, 2.75”-3.50”, 3.50”-4.25” and 4.25” - 5.12”. Other standard accessories include wheel caliper, weight hammer, rear mounting spring, Quick-Nut, Quick-Nut bell adapter and specialty calibration weight.

Wheel weight starter kit

With the purchase of your new DST642D wheel balancer, we throw in two bulk rolls of 100 silver and 100 black adhesive tape weights. We also include a starter box of mixed clip-on steel weights.

Flange plate kit

Precision balancing requires a flange plate kit, and this completely adjustable, multi-position design features centering pin adapters that fit almost all vehicles, foreign and domestic. The pin adapters also fit light-duty truck lug-bolt patterns. Lug-bolt adapters are better for wheel balancing than using the cone by itself, and your customers will feel the difference when they drive. Flange plate kit includes a measuring caliper.

 

DST642D Specifications

Style

Style: Auto & Light Truck

Data Entry

Data Entry: Automatic
Motor  1.5 HP, 110V / 220V, 50 / 60 Hz, 1Ph
Working Temperature  -5°C / 27°F - 50°C / 82°F
Cycle Time  6 - 12 Seconds (avg.)
Balancing Modes  1 Dynamic / 2 Static / Multi-Alloy
Drive System  Serpentine Poly-V Belt
Wheel Braking  Automatic / Pulse Electronic
Cones Included  3 Standard / 1 Truck
Max. Tire Diameter  50” (1,270 mm)
Max. Tire Weight  150 lbs. (68 kg)
Wheel Diameter Capacity  10” - 30” (254 - 762 mm)
Wheel Width Capacity  1.5” - 20” (38 mm - 508 mm)
Balancing Increments  0.25 or 0.01 ounce
Balancing Speed  180 RPM
Accuracy  +- .5 Gram (.025 oz)
Resolution  5 Gram (.25 oz)
Shipping Weight  498 lbs. (226 kg)
 

Features

  • Automatic rolling wheel parameter setting feature saves valuable time and minimizes errors
  • Low RPM balancing speed and rapid six-second cycle time
  • Automatic braking
  • Gram/ounce selection and millimeter/inch selection
  • An audible alarm and brightly displayed LED’s identify exact weight amounts and precise positioning for perfect balancing
  • Tiered weight placement indicators help identify out-of-sight position weight placement such as split-weight or hidden “behind-the-spoke” techniques
  • Wheel restraint pedal secures wheels at precisely 12-o’clock for easier servicing and proper weight placement
  • LED inner wheel target light automatically illuminates the interior of the rim and helps identify the exact weight placement location. Auto-activates each time the wheel restraint pedal is depressed.
  • Manual or automatic start when hood is lowered
  • Self-calibration function
  • High-volume top weight tray and side shelf storage gives you room to inventory a wide variety of wheel weights and tools
  • Precision-machined, hardened-steel 36 mm shaft (ACME thread 30-degree 3-P)
  • Quick-release hub nut for dramatically reduced set-up times
  • Side cone storage pegs keep mounting cones readily available
  • Open-sided hood design allows for a broader coverage of tire shapes and sizes
  • Wheel Weight Starter Kit: Free samples of Ranger steel wheel weights are included. Starter Kit includes one bulk roll of 100 silver adhesive steel tape weights, one bulk roll of 100 black adhesive steel tape weights and one starter box of mixed clip-on steel weights.
 

 Product Videos

Wrenchin Roger: Ranger Wheel Balancer Shootout Video
  • Wrenchin Roger: Ranger Wheel Balancer Shootout Video
  • Ranger DST64T Ruler Calibration
  • Ranger DST64T Wheel Balancer Calibration Procedure
  • Ranger DST64T DataWand™ Calibration
  • Ranger DST46T Wheel Balancer Gram Ounce
  • Ranger DST64T Wheel Balancer Unpacking and Set-Up
  • BendPak Ranger DST64T Wheel Balancer Demo (ALUS)
    The Ranger DST64T is a premium wheel balancer that delivers th...
  • Ranger DST64T Wheel Balancer Self Test

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Ranger DST642D 2-D Quick-Touch™ Wheel Balancer with 36mm Shaft to your wish list.