BendPak RBJ-15000 Rolling Bridge Jack 15000 LBS
15,000-lb. capacity rolling bridge jack is specifically designed for use with your HD-27 and HD-35 4-Post series lift.

• 
  *15000-pound lifting capacity 
  *Min Width 42-1/2"
  *Max Width 56-1/2"
  *Min Arm Reach 48-1/4"
  *Max Arm Reach 67-1/4"
  
  

          

   

  • 

    RBJ15000

    SKU# 5175031

    15,000-lb. Capacity / Rolling Bridge Jack

    ---

    Our 15,000-lb. capacity bridge jack is made just for the HDS-35 four-post lift. This particular car lift is truly made for massive trucks and commercial equipment. Check out the RBJ15000 jack if you need to perform full wheel service on heavy-duty vehicles.

    Lift 15,000 lbs. for Full Wheel Service Capability

    The RBJ15000 bridge jack is capable of lifting half of a 30,000-lb. truck or commercial bus. The HD-35 car lift is a heavy-duty machine meant for professional shops that deal with massive, specialty equipment. If you have a truck lift, you have easy access to the undercarriage but can’t get to the wheels. A rolling bridge jack opens the door to new service opportunities, such as wheel balancer, wheel alignment and tire changer equipment.

    Rubber contact pads

    BendPak bridge jacks feature rubber contact pads that are tougher than the rest. Resilient, sturdy and long-lasting, they never mark up or scratch your vehicle chassis or undercarriage. The jack is low-profile, so the pads fit comfortably underneath low-stance cars.

    Stackable adapters

    While the pads sit low enough for low ground-clearance vehicles, high-clearance vehicles have a tendency to lose lift with frame-engaging jacks. BendPak solves this issue with stackable adapters that come standard with every bridge jack. Better yet, two jacks allow you to lift a massive 30,000-lb. vehicle completely off its wheels.

    High-pressure hydraulic power unit

    The power unit to this jack is completely pneumatic-hydraulic. A small airline is attached to the bridge jack and is controlled with an ergonomically designed foot pedal. Two bridges jacks can share a single airline with the addition of BendPak’s exclusive, optional airline kit.

    Three lock levels

    Raise your jack to three different heights—whatever is most comfortable for you. The work you do varies, so if all you need is to lift the wheels a few inches, just enough to remove them, BendPak makes it easy. Rolling bridge jacks also give a little more raise for extra undercarriage clearance and comfort.

     

    RBJ15000 Specifications

    Capacity

    Lifting Capacity*15,000 lbs. (6,804 kg)

    Rise

    A - Max. Height + Pad Only:23" (584 mm)

    B - Max. Height + Pad + Adapter:26" (660 mm)

    C - Min. Height + Pad Only:14" (356 mm)

    D - Min. Height + Pad + Adapter:17" (432 mm)

    Time to Full Rise:45 seconds

    Reach

    F - Support Arm Width:44.9" (1,140 mm) -

    G - Max. Arm Reach:63.75" (1,619 mm)

    H - Min. Arm Reach:39.5" (1,003 mm)

    Power Unit

    Motor:Air-Hydraulic Pump

    Noise:45 dB

    Shipping

    Weight:570

    Dimensions:36" x 22" x 21" / 914 mm x 559 mm x 533 mm

    Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.

     

    Features

    • 15,000-lb. lifting capacity
    • Rubber contact pads
    • Stackable adapters
    • High-pressure hydraulic power unit
    • Optional air-line kit