Loading... Please wait...

Categories

BendPak HDS-14LSX 4-Post Lift Alignment Lift14000LB

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
BendPak
RRP: $7,525.00
$6,295.00 (You save $1,230.00)
SKU:
5175171
Shipping:
Free Shipping

 Product Description

 

bendpak-authorized-dealer.gif
 BendPak HDS-14LSX 14,000 LB  4-Post Alignment Lift  Extended
The HDS-14LSX pulls double duty as both a legendary 14,000-lb. capacity lift and an alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize alignment convenience. Even though the vehicle is completely secure, the wheels respond to your every adjustment with virtually no resistance. Imagine: the raw lifting power of BendPak’s Best combined with a free-floating four-wheel alignment system. Your job just got easier. This model is available with optional drive-thru ramps, dip-trays and rolling jacks.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points


  • *14,000-pound lifting capacity 
    *130" Wide
    *Overall Lenght 224"
    *Min  4-Wheel Alignmrnt 89"
    *Max 4-Wheel Alignmrnt 156"
    *Max 2-Wheel Alignmrnt 182"
    *Max Rise 70"
    *Lifting Time 60 sec.
    *Motor 220 VAC/1 Ph

    pdf.instructions.jpg       pdf.catalog.jpg          

 

 Alignment Lifts by BendPak

HDS-14LSX

SKU# 5175171

14,000-lb. Capacity / Alignment Lift / Extended / Includes Turnplates and Slip Plates


The legendary, 14,000-lb. capacity HDS-14LSX alignment lift pulls double duty as both car lift and alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize convenience. The wheels respond to every adjustment with virtually no resistance.

 

lsx.jpg

Capacity

Lifting Capacity*  14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle  7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle  7,000 lbs. (3,175 kg)Rise
A - Min. Runway Height:  7.625" (194 mm)
B - Max. Rise:  70" (1,778 mm)
C - Max. Lifting Height:  77.625" (1,972 mm)
Time to Full Rise:  60 seconds

 

RISE

A - Min. Runway Height:  7.625" (194 mm)
B - Max. Rise:  70" (1,778 mm)
C - Max. Lifting Height:  77.625" (1,972 mm)
Time to Full Rise:  60 seconds

 

Outside Dimensions

D - Overall Width:  130" (3,302 mm)
E - Outside Length:  213" (5,410 mm)
F - Overall Length:  241" (6,121 mm)
G - Height of Columns:  95" (2,413 mm)

 

Inside Dimensions

H - Width Between Columns:  120" (3,048 mm)
I - Drive-Thru Clearance:  98" (2,489 mm)

 

Runways

J - Runway Width:  20" (508 mm)
K - Length of Runways:  199" (5,055 mm)
L - Width Between Runways:  37.5" (953 mm) or 51" (1,295 mm)

 

Alignment

M - Min. 4-Wheel Alignment:  89" (2,261 mm)
N - Max. 4-Wheel Alignment:  156" (3,962 mm)
O - Max. 2-Wheel Alignment:  182" (4,623 mm)

 

Minimum Wheelbase

Rated Capacity:  140" (3,556 mm)
75% Capacity:  120" (3,048 mm)
50% Capacity:  100" (2,540 mm)
25% Capacity:  80" (2,032 mm)

 

Locking

Locking Positions:  13
Lock Spacing:  4"

 

Power Unit

Motor:  220 VAC / 60 Hz / 1 Ph
Noise:  45 dB

 

Shipping

Weight:  3,102 lbs. (1,407 kg)
Dimensions:  209" x 22" x 44" (5,309 mm x 559 mm x 1,118 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 

Features

  • 14,000 pound lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493
  • Two runway lengths to choose
  • Heavy‐duty turn plates and integrated rear slip‐plates included
  • Multi‐position turn plate pockets
  • Automatic leveling system
  • Multiple auto-leveling locking positions
  • Runways include rail‐kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal "Anti-Sway" slider blocks in each column
  • Features oversize sheaves and heavy‐duty 1/2” aircraft cable
  • Rugged 1‐3/8" roller axles and oversize self‐lubricating cable sheaves
  • Multi‐position safety locks in each column with push‐button safety release
  • Runways adjust for different tread widths and feature non‐skid surface
  • Optional 7,000 pound capacity bridge jacks available (Model RBJ7000)

Alignment Lift System Offers 14,000 lbs. of Pure Lifting

BendPak's HDS-14LSX alignment lift is engineered to meet the strenuous demands of your toughest professional lifting jobs. Designed into the HDS-14LSX alignment lift is a long list of crucial features that improve safety, durability and productivity, ensuring your BendPak is the absolute best car lift you can buy.

This is the sturdy beast you want as the backbone of your shop, especially if you service large, low ground-clearance vehicles. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. We call it “free-floating.” You’ll find it unbelievably easy.

Slip plates

Multi-caster slip plates in the back and turn plates in the front allow for extremely precise, free-floating alignment.

Turn plates

Dual, recessed turn plate pockets allow you to position the corrosion-resistant, galvanized turn plates in the location best suited for individual vehicle positioning. These turn plates provide more clearance for equipment installations.

Dual-hub cable sheaves

This BendPak alignment lift comes standard with robust 10.5” diameter cable sheaves within the runway and cross tubes and 2.25” diameter sheave axles that are equally durable. Both contribute to the longevity and low-maintenance cost of owning and operating your lift.

Heavy-duty aircraft cable

A 1/2” diameter 6 x 25 aircraft-quality stainless-steel lifting cable runs through each of the four columns. Designed for non-stop use and totally resistant to rubbing and other abrasions (e.g., weather, chemicals, hydraulic oil).

Adjustable height locking positions

Get your alignment lift to just the right height. No need to reach or bend for the turn plates, as every few inches, each post column features a lock position for your convenience.

Built-in lubrication

Grease fittings are included on every BendPak lift, so you can focus on the alignment of your wheels without worrying about the lubrication of your cable sheaves. BendPak makes it easy to keep an eye on your grease nipples, which only require periodic maintenance. Just peek inside the structure before, during or after using your alignment lift to see how the fittings are doing.

Flow restrictor

In the extremely unlikely event of a hose rupture, BendPak’s unique hydraulic flow divider provides a safe, even descent, thus keeping your alignment lift structure safe and ready to go after you address the situation. We highly doubt you will ever encounter this situation with your lift.

Spring-loaded safety locks

As the alignment lift rises to your preferred service level, springs engage the locks into place at each ladder position. The adjustable nature of the spring-loaded, multi-locking structure offers you the comfort of knowing that you’re safe to lift, even if there’s a slight slope in your garage.

Push-button pneumatic lock release

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service.

Secondary lock system

A slack-cable lock is your backup safety mechanism that’s ready at all times to shut off the alignment lift in the event of dangerous cable slack.

Integrated design

All cables, sheaves and airlines, as well as the single hydraulic cylinder, run internally through the lift structure. This optimizes aesthetics and safety in way that has come to define the BendPak brand.

Electric-hydraulic power system

No maintenance necessary! The electric-hydraulic power system features ergonomically located controls for easy operator access during repetitive daily use.

Non-skid runways

Even if your alignment lift runways get wet or oil-stained, your vehicles will rotate on the turn plates without slipping off the ramps. The runway surface is rugged enough to hold vehicles, no matter what other pushing, bumping and other craziness occurs in the shop.

Longer approach ramps

Longer ramps make it easier to load low ground-clearance vehicles onto the car lift structure. Alignments on these vehicle types are no hassle, and of course, larger vehicles can glide on just as easily.

Flexible protective conduit

An extra-tough yet flexible conduit protects all airlines and hydraulic hoses from daily wear. Your alignment lift is safer and operations can be handled more confidently when you know your cables won’t deliver sudden, unfortunate electric shocks, ruptures or fluid leaks.        

Rolling bridge jacks

Optional rolling jacks make a great addition to increase service capacity. Bridge jacks raise the front or back of vehicles, so wheel and brake service can be performed without moving to a two-post lift or scissor lift. Use two jacks to raise the entire car. Telescoping arms and frame contact pads extend over runways and target the vehicle frame’s lifting points. Runways are fully adjustable for different tread widths. Three locking positions offer additional operator control.

Choose extended frames

The HDS14LSXE is designed for extended-length vehicles, such as trucks and vans. The runways and overall length are extended by 30”. With runways now 229” in length, some very long vehicles can fit easily on the car lift. If your service bay demands these vehicle types, an extended length alignment lift is absolutely necessary to perform wheel alignments.

 
 
 
 

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HDS-14LSX 4-Post Lift Alignment Lift14000LB to your wish list.