KATOOL Automotive Equipment
Katool KT-M120 12,000lbs Two Post Clear-floor Vehicle Lift
- SKU:
- KT-M120
- UPC:
- KT-M120
- Condition:
- New
- Availability:
- Factory Shipped
- Shipping:
- Free Shipping
Description
Katool KT-M120 12,000lbs Two Post Clear-floor Vehicle Lift
KT-M120 12000lbs Vehicle Lift
*Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation.
- 12000lbs(5500KG) lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Manual safety release from two sides
- Symmetric arms
- Dual Hydraulic Chain-Drive Cylinders
- Rubber pad door opening protection
- Comes with extended support adaptor sets of + 30 mm and + 120 mm
- Overhead safety shutoff bar
- Feet-protection safety guardrails with tools box
- High-quality hydraulic system with 220V/60HZ/1PH (110V/60HZ/1PH OPTIONAL ADD-ON PURCHASE $199)
Lifting Capacity | 12000 lbs. (5500KG ) |
Max. Lifting Height | 70.75" / 1800mm |
Min. Height | 4.25" / 110mm |
Height Overall | 166.75" / 4235mm |
Width Overall | 165.5" / 4204mm |
Outside Columns | 151.25" / 3840mm |
Inside Columns | 130" / 3390mm |
Drive Thru Clearance | 117.75" / 2990mm |
Motor | 220VAC/60HZ/1PH |
Net Weight | 1653lbs/750K |
KT-M120 2 Post Lift By Katool
The KT-M120 by Katool laughs in the face of weight limitations. This bad boy boasts a whopping 12,000 lbs lifting capacity, enough to handle even the most intimidating vehicles with ease. Don't settle for shaky lifts that leave you sweating cold – the KT-M120 is CE Approved and Certified, exceeding safety standards with a 150% static load capacity test.
This lift isn't just about brute strength, though. Symmetric arms and dual hydraulic chain-drive cylinders ensure smooth, balanced lifting, while the manual safety release provides peace of mind. Rubber door padding protects vehicles, and extended support adapters offer versatility for varying heights. Powered by a high-quality hydraulic system, the Katool KT-M120 delivers consistent, powerful performance. Stop struggling with weak lifts. Upgrade to the KT-M120 and experience the power of confidence in heavy-duty lifting.
2 Post Lift KT-M120 Specification:
- Lifting Capacity: 12,000 lbs.
- Max. Lifting Height: 70.75"
- Min. Height: 4.25"
- Height Overall: 166.75"
- Width Overall: 165.5"
- Outside Columns: 151.25"
- Inside Columns: 130" (3390 mm)
- Drive Thru Clearance: 117.75" (2990 mm)
- Motor: 220VAC/60HZ/1PH
- Net Weight: 1653 lbs. (750 KG)
- Oil: AW-46 or AW-32 (colder climates)
KT-M120 by Katool Special Features:
12000lbs lifting capacity
- CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested
- Manual safety release from two sides
- Symmetric arms
- Includes Extended Support Adapters: 1.25" & 4.75"
- Cable Thickness: 3/8"
- Dual Hydraulic Chain-Drive Cylinders
- Rubber pad door opening protection
- Comes with extended support adaptor sets of + 30 mm and + 120 mm
- Overhead safety shutoff bar
- Feet-protection safety guardrails with tools box
- Power 220v/60HZ/1PH - Standard Option; 110v/60HZ/1PH *
- *Must be wired to a circuit with 10-gage wire and a 30-amp breaker
- Katool Warranty:
- One-year (12 months) warranty on all parts and against all product defects, free of charge to our customers, on all equipment.
- Vehicle lifts will include an additional three-year (36 months) warranty on all lift structural components only.
- Pallet Dimensions:
- 112" x 18" x 36"
- 1,750lbs
SHIPPING POLICY:
- Freight shipping ONLY within the lower 48 states.
- Free shipping to commercial addresses or freight terminals.
- Residential address or limited access is charged by carrier extra cost.
- This item is too heavy so the customer should consider a forklift to unload it.
- Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.