Katool KT-4H150 Heavy Duty 4-Post Alignment Lift 15,000lbs. Rolling Jack Included

 (Turnplates not included)

KT-4H150 Four Post Alignment Vehicle Lift 15,000lbs

*Concrete thickness must be at least 3.93” (100 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

• 15000lbs lifting capacity. 

• CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested.

• Spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

• Equipped with multiple adjustable height locking positions for variable-height positioning. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

• Power side column can be installed at both sides, front or rear.

• Non-skid diamond texture ramps and non-slip coated runways. 

• One 6000lbs rolling jack is included. 

• High-quality hydraulic system, 3KW motor with 220V/60HZ/1PH or 110V/60HZ/1PH (Optional)

SHIPPING POLICY:

• Freight shipping ONLY within the lower 48 states.
• Free shipping to commercial addresses or freight terminals.
• Residential address or limited access is charged by carrier extra cost.
• This item is too heavy so the customer should consider a forklift to unload it.

• Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.

12 Months All Parts Warranty!