Katool AK-X95 Full Rise Scissor Lift 8,000 Lbs capacity

 AK-X95 Full Rise Scissor Lift

•  

   *This model should be securely anchored to concrete before operation. Concrete thickness must be at least 5.9” (150 MM) with a 3000 PSI rating. Failure to install this lift on the proper concrete, could result in serious injury or death! It is the customer’s responsibility to verify concrete thickness and strength before purchase and installation. 

  • 8000lbs(3500KG) lifting capacity

  • CE Approved and Certified. It has adopted the 115% dynamic loading capacity standard and was 150% static loading capacity tested

  • Flush mount design

  • Starting-up system design

  • Electric safety release

  • 24V safe control system

  • Height limit switch

  • Composite rubber lifting blocks included

  • Comes with self-lubricated bushing and bearing

  • Drive-up ramps lock design as platform extension for long vehicles

  • Top-level hydraulic system and aluminum motor with the fan on top to avoid overheating caused by long time working

  • The unit needs to be connected to a compressed air source. 

  
  

  Max.lifting capacity	8000 lbs
  Lifting height	72.3 inch
  Lifting time	≤50S
  Platform length	58.9 inch
  Platform  width	24.4 inch
  Motor  power	2.2kw
  Rated oil pressure	20MPa
  Air pressure	6-8kgf/c ㎡

   

  SHIPPING POLICY:

• Freight shipping ONLY within the lower 48 states.
• Free shipping to commercial addresses or freight terminals.
• Residential address or limited access is charged by carrier extra cost.
• This item is too heavy so the customer should consider a forklift to unload it.

• Buyers should inspect delivered the products carefully before signing the Bill of Lading or Delivery Receipt at the time of delivery. Buyer satisfaction is assumed if no damages are noted on the delivery receipt.

12 Months All Parts Warranty!