null
TRIUMPH Equipment

Triumph NTC-950-1 + NTB-550 TIRE CHANGER AND WHEEL BALANCER

Write a Review
SKU:
NTC-950-1/NTB-550
UPC:
NTC-950-1 + NTB-550
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
On Sale
$4,650.00
$3,750.00
$3,900.00
— You save $900.00

Description

Triumph NTC-950-1 + NTB-550 COMBO PACKAGE

triumphlogo-180x70.jpg

pdf.instructions.jpg    pdf.instructions.jpg

 

  
Free Freight to most states!  Free Lift Gate service at delivery on all tire changers and wheel balancers!

The NTC-950-1 is a commercial style tire changer gives you the ability to do run flat and low profile tires with the help of the assist arm.  Paired with the NTB-550 Wheel Balancer, you can service just about any vehicle that may drive up to your shop.  NTC-950-1 Tire Changer opens up to 28" and is equipped with and Assist Arm, Jet Blast Inflator System and a powerfull bead breaker system.  The NTC-950-1 Tire Changer includes a metal and plastic demount head, plastic rim clamp covers, tire iron, and lube bucket/brush.  The NTB-550 Wheel Balancer includes foot pedal wheel brake to hold wheel in place while placing weight increasing accuracy.  Includes plastic safety hood, quick release wing nut, cone adapters, wheel weight hammer, and rim caliper.

 

NTC-950-1

Inside Clamping Distance   16" - 28"

Outside Clamping Distance   14" - 26"

Max Wheel Width   15"

Max Tire Diameter   43"

NTB-550

Max Wheel Size Range   10" - 28"

Max Tire Diameter   44"

Rim Width   1.5" - 20"

Tire Changer
Inside Clamping Distance 16" - 28"
Outside Clamping Distance 14" - 26"
Max Wheel Width 15"
Max Tire Diameter 43"
Beadblast Yes
Horsepower 1.5 HP
Bead Breaker Force 5500 lbs.
Max PSI 120 PSI
Voltage 110V AC
Assembled Size  
Shipping Size 51" x 38" x 51"
Shipping Weight 820 lbs.
Wheel Balancer
Wheel Size Range 10" - 28"
Max Tire Diameter 44"
Rim Width 1.5" - 20"
Max Capacity 150 lbs.
Shaft Size 36 mm
Automatic Data Entry No
Display Standard and Metric
Accuracy +/- 1 Gram
Cycle Time 6-9 Seconds
Horsepower 1/4 HP
Voltage 110V AC
Assembled Size 28" x 47" x 56"
Shipping Size 36" x 28" x 46"
Shipping Weight 325 lbs.

View AllClose

Warranty Information

TRIUMPH Warranty Policies: All Auto Lifts, Laser Machine, Frame Machine, and Pipe Benders are warranted for one year . All Tire equipment is warranted for 1 year. All other shop equipment is warranted for 30 days. Warranty is for parts only. No labor warranty exists. Cylinders on all auto lifts will be sent seal kits for repair after 30 days. Warranty does not cover rubber lifting pads on two post lifts. Warranty does not include normal wear and tear parts on tire changers including but not limited to plastic demount heads, plastic rim clamp covers, valve stem inflation hose, plastic bead breaker cover. Water separator and oiler are warrantied for 60 days. Warranty does not include normal wear and tear parts on wheel balancers including but not limited to quick release wing nut, wheel weight hammer, plastic wheel cone. Replacement parts or replacement equipment being sent to the customer does not represent an extension or renewal of the warranty period. Shipping of warranted parts is for normal ground shipping only within the USA. Shipping costs outside the USA are the responsibility of the customer. Customer may request expedited shipping at their own expense. All Shipping costs are paid by customer after first 60 days of warranty period, no exceptions. International customers pay all shipping costs on all parts, no exceptions. No warranties exist for any incidental cost occurring from loss of use of product. Warranty is not transferable. Warranty is issued to original purchaser only and cannot be transferred to anyone else. Any attempts at charge backs or legal action against National Auto Tools voids the warranty on the product purchased regardless of the decisions made by all companies involved in the transaction and or the decision of the courts. Once warranty is voided, it cannot be reinstated. No other warranty is expressed or implied. Warranty is governed by the laws of the State of Texas, County of Tarrant. National Auto Tools will not enter into any verbal agreements regarding changes to the stated warranty policy. National Auto Tools reserve the right to change or amend any measurements, instructions, policies, pictures, and warranties, as stated in our manuals, on our National Auto Tools website, and on any other printed or published materials, without notice to customers prior to changes being made. Any and all vehicles pictured with our products do not imply a set measurement or dimension in regards to the lift with which they are pictured. Purchaser/Customer has read and understands the whole of this document and all parts thereof. Purchaser/Customer further understands that this document and all parts thereof is governed in whole or in part by the law of the State of Texas. Any action at law, suit in equity, or other judicial proceedings for the enforcement of this document or any provision thereof shall be instituted only in the courts of the State of Texas, County of Tarrant. The covenants and conditions contained in this document shall apply to and bind the parties, purchasers, customers, heirs, legal representatives and assigns of the parties.
View AllClose

2 Reviews

  • 5
    All around great

    Posted by Ted on 7th May 2021

    Everything in perfect order, easy assembly, operates exactly as intended, great service and delivery.

  • 4
    Early Review after first use

    Posted by Dave on 9th Feb 2021

    I only gave this a 4 simply because it is too early to tell as I just got it up and running and changed/balanced my first tire so I can't say anything about durability yet. The installation instructions are terrible, and on the balancer there were none and just instructions for operation and even then mostly the electronic use. Equipment itself seems pretty good so far for non-professional grade equipment and we expect it to be a really good fit for the level of use it will get in our shop. The balancer came with the cover arm lose - probably needed for the packing in shipping. I contacted mytoolguy and they immediately got me some more information and gave my number to a tech who quickly sent me a couple videos on how to tighten that arm and set the switch so it would turn off/on when the hood was closed. After that video, I had the machine up and running in minutes. I searched for calibration and use videos on the balancer and found one on Youtube that was clear. I never found a video for my exact tire changer with the side arm but found similar and figured it out easily enough. So, the support was superb and a big plus. There were many other parts included with these and no instructions on when they were to be used. Some are common parts and easily enough to figure out, others I assume are for special wheel situations but no explanation of how or when they are used so for now they are off to the side. I removed and reinstalled a low profile tire with no problems. The hydraulic side arm was very useful with this and glad that I got this more expensive model with that arm as we expect to change quite a few of these. We bought these machines only for personal use - they are in a shop with 4 guys sharing it and between us we have about 30 cars. Add in family and friends and there are probably another 30 cars so they will get use a few times a month. For us it looks to be a good addition to our shop and so far are very happy with it.

View AllClose