Loading... Please wait...


Nussbaum Jumbo 7 ALI Certified - 7,000 lb Double Scissor Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
Nussbaum USA
RRP: $9,550.00
$8,780.00 (You save $770.00)
Jumbo 7 ALI
Calculated at checkout
Minimum Purchase:
1 unit(s)
* This is a Plus Shipping Item and I will be contacted w/ shipping costs:

 Product Description





Item No:Jumbo 7 ALI Certified
Lifting capacity:7000 lb
Type Scissor Lift

Nussbaum Nussbaum Jumbo 7-  7,000 lb Double Scissor Lift


 ali.png pdfcatalog.png

The hydraulic double scissor lift Jumbo 7 with a capacity of 7,000 is the perfect all-round lift for car workshops where speed, flexibility and reliability are in demand. With its small space requirement, its high lifting height of 79, the length-adjustable platforms and the flat design, it is the lift that no professional car workshop should be without. Whether for tire changes, oil changes, work on the engine or inspection, for low-lying sports cars, SUVs or vans, the Jumbo 7 is ready to lift at lightning speed. The drive-on ramps can be unlocked and locked by one-hand operation in order to extend or shorten the platform. Jumbo 7 is manufactured right here in the USA in Gastonia, North Carolina.

  • Lifting time: seconds
  • Capacity: 7,000 lbs
  • Effective lifting height of 79 inch
  • Extremely flat construction: Drive-on height of only 4 inch
  • Length-adjustable mounting - drive-on ramps can be locked and unlocked by one-hand operation
  • Flexible mounting: Adjustabl guaranteed quality: Power unit, hydraulic cylinder and the complete lifting platform are e width, no compressed air access required
  • 360° access
  • Can also be installed flush with the floor
  • Three timestested before dispatch.
  • Developed and manufactured in the USA

All hydraulic Jumbo lifts are equipped with two redundant hydraulic circuits as standard. The Jumbo 7 is not only safe, but also exceptionally flexible and can be installed in different installation widths as required. The Jumbo 7 requires no compressed air at all. The four hydraulic cylinders require very little energy. The control unit is connected to the lift only by the hydraulic hoses and can be positioned freely around the lift. The hydraulic hoses can be mounted on the workshop floor or in a protective metal housing on the floor as required. The double scissors are welded in Nussbaum's own state-of-the-art welding facilities. Your lifting platform is protected against dirt and weather for a long time.



Jumbo Lift

7000 ALI


Capacity (lb)



Lifting Time Approx. (sec)



Lifting Height (in)



Drive Over Height (in)



Total Width (in)



Lifting Platform Width (in)



Lifting Platform Length (in)

57.5″ – 81″

57.5″ – 81″

Motor (kW)



Power Supply (V / Hz)

208/230 / 1ph / 20 AMP

208/230 / 1ph / 20 AMP

*All technical data are subject to change.

Packaging Wooden crate
Product Dimensions 70in x 30in x 35in
Total weight 2050lb
Stackable 3

 Product Videos

Nussbaum Lifts Booth at the SEMA 2017 Show
  • Nussbaum Lifts Booth at the SEMA 2017 Show
    https://jmcautomotiveequipment.com/brands/Nussbaum.html Nussb...

 Warranty Information

NUSSBAUM lift products are warranted to the original owner to be free of defects due to original factory materials and workmanship. The standard NUSSBAUM product policy for lifts provides a seven (7) year structural parts warranty, two (2) year warranty for non-structural parts.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2020 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Nussbaum Jumbo 7 ALI Certified - 7,000 lb Double Scissor Lift to your wish list.