null
  Loading... Please wait...

Categories

BendPak Two‐Post Car Lift XPR-10S

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
  • Image 16
  • Image 17
  • Image 18
BendPak
RRP: $5,695.00
$5,090.00 (You save $605.00)
SKU:
5175395
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)
Commercial delivery, I have a Fork Lift:
Residential delivery, I have a Fork Lift:
Please call me to make delivery arrangements:
Please drop off lift at local freight terminal:

 Product Description

 bendpak-authorized-dealer.gif

XPR-10S (5175395)

145" Height, 145" Width, 69" Rise

10,000‐lb. Capacity / Symmetric Clearfloor / Adjustable Width / Screw Pads

The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting capacity.

 

pdf.catalog.jpg      pdf.instructions.jpg    ali-etl-logo.jpggold-label.jpg  warranty-5-2-1-.-2.jpg

 Two-Post Lifts by BendPak

XPR-10S (5175395)

10,000‐lb. Capacity / Symmetric Clearfloor / Adjustable Width / Screw Pads


The XPR-10S two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting capacity.

 

XPR-10S Two-Post Lift Offers More Power, More Options

The XPR-10S is a reflection of our commitment to produce a car lift of the highest quality. Featuring the most advanced engineering in the industry, this lift is built to safety standards well above normal OSHA/ALI/ETL requirements.

Every BendPak lift offers an abundant roster of options and accessories that allow you to fully tailor the lift to your unique circumstance. In addition to these features, you'll be impressed with the long list of standard features and capabilities packed into the structure, parts and components.

When you buy a BendPak two-post lift, you can expect a significant boost in performance and life expectancy. No one surpasses us in quality or safety, which means your BendPak XPR-10S might be the last lift you ever purchase.

Why choose a symmetric lift

Our XPR-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.

Direct-Drive two-post lift technology

The XPR-10 two-post lift features low-pressure HVLP direct-drive cylinders, eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade car lifts, as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

Two-stage telescoping screw pad assembly kit

The XPR-10S features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters is included with the purchase of a lift.

Features & Specs

XPR-10S specs diagram

  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • Triple‐telescoping front arms
  • ETL Approved

Capacity

Lifting Capacity* 10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle 5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle 5,000 lbs. (2,268 kg)

Rise

A - Rise: 69" (1,753 mm)
B - Rise + Pad Only: 75" (1,905 mm)
C - Rise + Pad + 63 mm Adapter:
77.5" (1,969 mm) D - Min. Height + Pad: 4" (102 mm)
Time to Full Rise: 45

Outside Dimensions

E - Height Overall: 145" (3,683 mm)
F - Width Overall: 132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns: 126.75" (3,219 mm) or 139.75" (3,550 mm)

Inside Dimensions

H - Inside Columns: 105.5" (2,680 mm) or 118.5" (3,010 mm)
I - Drive-Thru Clearance: 93" (2,362 mm) or 106" (2,692 mm)
J - Floor To Overhead Switch: 141" (3,581 mm)

Arms & Pads

K - Front Arm Reach: (MIN) 27.5" (699 mm)
K - Front Arm Reach: (MAX) 51.5" (1,308 mm) 
L - Rear Arm Reach: (MIN) 34" (864 mm)
L - Rear Arm Reach: (MAX) 54.5" (1,384 mm)
Screw Pad Adjustment: 2" (51 mm)
Max Load Per Arm 2,500 lbs. (1,134 kg)

Power Unit

Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 db

Shipping

Weight: 1,790-lbs. (811.9 kg)
Dimensions: 150'' x 24'' x 31'' (3810 mm x 609 mm x 3810 mm)

 

BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).

 

Features

  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Padded overhead safety shutoff bar
  • Telescoping arm design for more versatile arm positioning
  • Single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • Triple‐telescoping front arms
  • ETL Approved

XPR-10S (5175395) Options

  • Low-Profile Arms
    XPR-10S-LP
    5175396
    Two-stage, low-profile arms
    $35
    Bolt-On Extension
    XPR-10S-168
    5175399
    Added 24" height clearance
    $280
    Combo
    XPR-10S-168-LP
    5175400
    Increased height and low-profile arms
    $315

    BendPak Symmetrical Two-Post Car Lift

     

 Product Videos

My New BendPak 2-Post Lift!
  • My New BendPak 2-Post Lift!
    In this episode we review, install and test our new BendPak XP...
  • Offset Adapters for BendPak Two Post Car Lifts
    http://www.bendpak.com/car-lifts/accessories/offset-adapters.a...
  • BendPak New Two-Post Screw Pad Adapter Demo
    New telescoping screw pads from BendPak fit BendPak’s new 9,00...

 Warranty Information

BendPak WARRANTY
BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2022 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak Two‐Post Car Lift XPR-10S to your wish list.