Loading... Please wait...


BendPak RBJ-9000 Rolling Bridge Jack 9000 LBS

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
RRP: $2,705.00
$2,260.00 (You save $445.00)
Free Shipping

 Product Description

BendPak RBJ-9000 Rolling Bridge Jack 9000 LBS
9,000-lb. capable rolling bridge jacks by BendPak are designed to be used with your HD-18 4-Post series BendPak car lift and are a great alternative to two-post car lifts.

  • *9000-pound lifting capacity 
    *Min Width 41"
    *Max Width 51-1/2"
    *Min Arm Reach 40-1/4"
    *Max Arm Reach 63-1/4"

    pdf.instructions.jpg       pdf.catalog.jpg  5-2-1-warranty.jpg


    4-Post Bridge Jacks by BendPak


    SKU# 5175985

    9,000-lb. Capacity / Rolling Bridge Jack

    BendPak’s 9,000-lb. capacity rolling bridge jack is ideal for use on the HDS-18E four-post lift, especially if your vehicles have an unbalanced center of gravity. This jack is ideal for heavier trucks and SUVs.


    • 9,000-lb. lifting capacity
    • Rubber contact pads
    • Stackable adapters
    • High-pressure hydraulic power unit
    • Optional air-line kit

    Lift 9,000 lbs. for Full Wheel Service Capability

    With a 14,000-lb. capacity lift, you might think the RBJ7000 rolling bridge jack is sufficient for your vehicle. However, vehicles that max out a lift's capacity might have offset centers of gravity. In such cases, the RBJ7000 is not suitable to lift those vehicles. That’s why we offer the RBJ9000. A heavier-duty bridge jack can save you from having to swap your perfectly fine four-post lift for a heavier-duty model.

    Rubber contact pads

    Rubber contact pads are essential lifting components. They increase rise and firmly engage your vehicle’s undercarriage lift points. The durable yet non-marring surface ensures vehicles are not scraped or damaged during rolling bridge jack or car lift operation.

    Stackable adapters

    The ability to stack and unstack BendPak contact pads increases the versatility of your rolling bridge jack. These adapters are also useful for lifting vehicles that may have drastically different front-and-rear suspensions. With two rolling bridge jacks employed at once, the front may need an extra adapter to ensure an even lift.

    High-pressure hydraulic power unit

    BendPak’s rolling bridge jacks include a pneumatic-hydraulic power unit that comes attached to the jack. The car lift runs off its own power unit, so there’s no “sharing” of hydraulic power between the two. An airline must be attached to the rolling bridge jack with 125 psi and 10 – 20 CFM. Easy foot pedal control is included for your safety and convenience.

    Three lock levels

    With three lock positions, your rolling bridge jack can be raised to the level most comfortable for you. Find the perfect height for the perfect job as you also adjust the height of your car lift.


    RBJ9000 Specifications


    Lifting Capacity*9,000 lbs. (4,082 kg)


    A - Max. Height + Pad Only:14.5" (368 mm)
    B - Max. Height + Pad + Adapter:18" (457 mm)
    C - Min. Height + Pad Only:4.5" (114 mm)
    D - Min. Height + Pad + Adapter:8" (203 mm)
    Time to Full Rise:45 seconds


    F - Support Arm Width:41" (1,041 mm) - 51.5" (1,308 mm)
    G - Max. Arm Reach:56" (1,422 mm)
    H - Min. Arm Reach:42" (1,067 mm)

    Power Unit

    Motor:Air-Hydraulic Pump
    Noise:45 dB


    Dimensions:36" x 22" x 21" / 914 mm x 559 mm x 533 mm

    Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2020 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak RBJ-9000 Rolling Bridge Jack 9000 LBS to your wish list.