Loading... Please wait...


BendPak COMBO HDS-14X/RBJ-7000 - 14000 LB - 4-Post/Bridge Jacks

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
RRP: $11,505.00
$9,720.00 (You save $1,785.00)
5175173/5175986 (PR)
Free Shipping

 Product Description

BendPak Combo 14,000 LB  4-Post Lift HDS-14X Extended Limo Style -2 x RBJ-7000  (7000 Lbs Capacity) Rolling Bridge Jacks included
BendPak's "HDS‐Series" four‐post lifts are a whole new breed of rugged. They’re newly engineered car and truck lifts that work better, are built to last, and feature upgrades that increase safety, durability and productivity.

Four-Post Lifts by BendPak

Combo HDS-14X/ RBJ-7000

    SKU# Combo 5175173/5175986 (PR)

14,000-lb. Capacity / Four-Post Lift / Extended / Limo Style

The "limo style" HDS-14X lift is useful for vehicles that make use of its 229" runways. Limousines, as well heavy-duty SUVs and trucks, need the extra length, and that’s where this heavy-duty four-post lift comes in handy. Super-sized cable sheaves and base plates, as well as backup lock systems, guarantee massive protections for massive vehicles.




 HDS-X14X Info and DownLoads

pdf.catalog.jpg pdf.instructions.jpg ali-etl-logo.jpg 5-2-1-warranty.jpg


RBJ-7000 Info and DownLoads

pdf.catalog.jpg    pdf.instructions.jpg 5-2-1-warranty.jpg


*14,000-pound lifting capacity 
*130" Wide
*Overall Lenght 271"
*Height of Colums 93"
*Lenght of Run Ways 229"
*Max Rise 70"
*Lifting Time 60 sec.
*Motor 220 VAC/1 Ph


The HDS-14X Offers Extreme Length, Extreme Ease-of-Use

We call this our "limo style" lift because of how much front-to-back clearance it offers. Now your longest vehicles can make it over or under the lift with ease, and because it fits low-profile vehicles as well as heavy, high-stance ones, this lift instantly brings BendPak's unparalleled versatility and legendary craftsmanship right to your garage. If you're familiar with our standard-sized lifts, you know that BendPak equipment is better-built and longer-lasting, no matter the size or weight capacity of the lift.

The HDS-14X is an ideal four-post lift for commercial shops looking to expand their service abilities. The runways are extended 30" more than our standard-length model to a whopping 229". The extended approach ramps provide a safe, gradual climb, and an ample 70" rise permits most mechanics to stand upright to perform oil changes, exhaust service, wheel service and every other undercarriage activity.

Super-long 229" runways

The core of the HDS-14X is its expanded runway length. At 229", there isn't much this lift can't handle in its weight class. More vehicles mean more opportunities for profit. Best of all, smaller vehicles fit too, so this one lift alone might be enough to service every vehicle your customers bring in.

Dual-hub cable sheaves

Dual-hub cable sheaves reduce stress, fatigue and wear across the entire structure of the car lift. Large sheaves improve the durability of the entire lift, so this limo style lift utilizes huge, 10.5” diameter cable sheaves within the runway and cross tubes, as well as massive 2.25" diameter sheave axles.

Large base plates

10" x 12" base plates provide a solid foundation that doesn't excessively clutter your space.

Spring-loaded safety locks

Safety locks are one of the most crucial features of a car lift. BendPak locks engage continuously as the lift rises. The HDS-14X offers adjustable safety ladders, permitting fast, simple runway leveling. This is especially useful when compensating for slope.

Secondary lock system

A cable slack detection system acts as a backup lock, catching and stabilizing the lift platforms in the unlikely development of slack in the cables.

Longer approach ramps

Extended approach ramps decrease the drive-on angle of the vehicle, which is especially useful for low-riding sports cars that might otherwise get scratched or damaged.

RBJ7000 rolling bridge jack

An RBJ7000 7,000-lb. rolling bridge jack is enough to engage the frame of a 14,000-lb. vehicle and hoist half of it in the air. Rolling bridge jacks are necessary for four-post lift operators looking to maximize their shop capabilities and perform wheel service. BendPak bridge jacks are second-to-none in quality and are highly recommended for all full-service shops.

 BendPak Pair of RBJ-7000 Rolling Bridge Jack 7000 LBS


  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Mid to long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Oversized self-lubricating cable rollers
  • Rugged 1.75" roller axles
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model R​BJ7000)
  • ETL approved

HDS-14X Specifications



Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)


A - Min. Runway Height:7.625" (194 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:77.625" (1,972 mm)
Time to Full Rise:60 seconds

Outside Dimensions

D - Overall Width:
130" (3,302 mm)
E - Outside Length:
213" (5,410 mm)
F - Overall Length:
271" (6,883 mm)
G - Height of Columns:
93" (2,362 mm)

Inside Dimensions

H - Width Between Columns:120" (3,048 mm)
I - Drive-Thru Clearance:98" (2,489 mm)


J - Runway Width:20" (508 mm)
K - Length of Runways:229" (5,817 mm)
L - Width Between Runways:37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:77.5" (1,969 mm) or 91" (2,311 mm)

Minimum Wheelbase

Rated Capacity:165" (4,191 mm)
75% Capacity:140" (3,556 mm)
50% Capacity:115" (2,921 mm)
25% Capacity:95" (2,413 mm)


Locking Positions:13
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.



BendPak Pair of RBJ-7000 Rolling Bridge Jack 7000 LBS

SKU# 5175986


This 7,000-lb. capacity rolling bridge jack is made for an HD-14 four-post lift. Each rolling jack comes complete with three safety-lock positions and stackable pad adapters to provide added clearance when needed.


The HD-14 car lift is one of our most popular units for lifting medium-duty vehicles, as well as low-stance sports cars. Its extended approach ramps make it easy to safely engage your vehicle’s wheels, but what do you do when it’s time for a tire swap? Unless you want a two-post lift, as well, you’ll want a pair of BendPak’s RBJ7000 rolling bridge jacks. Each jack lifts half the vehicle frame.


BendPak rubber contact pads are included with every rolling bridge jack we sell. The RBJ7000 pads engage the lift points of large vehicle chassis with ease. We recommend purchasing the optional frame cradle pads for larger trucks and SUVs, as well.


Because different suspension rigs and vehicle bodies sit at different heights above the ground, the RBJ7000 rubber contact pads come with stackable adapters. This lets you reach the lift points without sacrificing how much rise you get from the jack. The adapters work on every vehicle type; all you need to know is whether the RBJ7000 is the right jack for what you want to lift.


A single, air-hydraulic pump is fitted to the side of the RBJ7000 rolling bridge jack. Your car lift has its own electric-hydraulic system that runs independent of your jack’s. After connecting the air line to the jack (needs 125 PSI and 10-20 CFM), an easy-to-use foot pedal activates the jack.


For your convenience, BendPak rolling bridge jacks can be lifted to three different positions. They lock automatically as the jack rises and release together as the jack descends. Your car lift operations are separate from those of the bridge jack.




Lifting Capacity*7,000 lbs. (3,175 kg)


A - Max. Height + Pad Only:18.8" (478 mm)
B - Max. Height + Pad + Adapter:21.8" (554 mm)
C - Min. Height + Pad Only:8" (203 mm)
D - Min. Height + Pad + Adapter:11" (279 mm)
Time to Full Rise:45 seconds


F - Support Arm Width:36" (914 mm) - 46" (1,168 mm)
G - Max. Arm Reach:60" (1,524 mm)
H - Min. Arm Reach:41" (1,041 mm)


Motor:Air-Hydraulic Pump
Noise:45 dB


Dimensions:36" x 22" x 21" / 914 mm x 559 mm x 533 mm

Included commercial-grade air-hydraulic pump requires 125 psi and 10 – 20 CFM.


  • 7,000-lb. lifting capacity
  • Rubber contact pads
  • Stackable adapters
  • High-pressure hydraulic power unit
  • Optional air-line kit

 Product Videos

This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
  • This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
    Dave Kindig from KINDIG-IT-DESIGN and the fasting growing Hot ...

 Warranty Information


Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2020 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak COMBO HDS-14X/RBJ-7000 - 14000 LB - 4-Post/Bridge Jacks to your wish list.