Loading... Please wait...

Categories

BendPak XPR-10S-168 Extra Tall, Dual-Width, 10,000 Lb. Capacity, Clearfloor

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
BendPak
RRP: $4,375.00
$3,660.00 (You save $715.00)
SKU:
5175399
Availability:
Ships in 48 HRs.
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description

 
bendpak-authorized-dealer.gif
BendPak XPR-10S-168 Extra Tall, Dual-Width, 10,000 Lb. Capacity, Clearfloor
The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership. All BendPak's XPR two-post models feature dual "direct-drive" low-pressure cylinders, maintenance free UHMW load bearings, single-piece columns, extra-tall lifting carriages and triple-telescoping arm configurations for increased arm positioning versatility.

 

Lifting capacity: 10,000 lbs.
Overall height: 168"
Overall width: 132" - 145"
Min pad height: 4"
Rise: 69"
Motor: 220 VAC / 1 Ph
Rise time: 45 sec

 

   pdf.catalog.jpg      pdf.instructions.jpg    ali-etl-logo.jpggold-label.jpg  5-2-1-warranty.jpg      

 

10s.1.jpg

10s.2.jpg

10s.3.jpg

 

XPR-10S TWO-POST LIFT OFFERS MORE POWER, MORE OPTIONS

  • The XPR-10S is a reflection of our commitment to a produce car lift of the highest quality. Featuring the most advanced engineering in the industry, this lift is built to safety standards well above normal OSHA/ALI/ETL requirements.

    Every BendPak lift offers an abundant roster of options and accessories that allow you to fully tailor the lift to your unique circumstance. In addition to these features, you'll be impressed with the long list of standard features and capabilities packed into the structure, parts and components.

    When you buy a BendPak two-post lift, you can expect a significant boost in performance and life expectancy. No one surpasses us in quality or safety, which means your BendPak XPR-10S might be the last lift you ever purchase.

    WHY CHOOSE A SYMMETRIC LIFT

    Our XPR-10S symmetric two-post lift features an adjustable top beam to accommodate wide or narrow installation setups. This unique configurable design allows you to choose the best setting for your specific space or vehicle lifting requirements. The highly sophisticated yet simple and dependable XPR-Series design requires very little service or maintenance for an overall lower cost of ownership.

    DIRECT-DRIVE TWO-POST LIFT TECHNOLOGY

    The XPR-10 two-post lift features low-pressure HVLP direct-drive cylinders, eliminating the need for lifting chains or screw mechanisms most commonly found on other lift designs. Dual HVLP low-pressure cylinders minimize leakage and offer better reliability, smoother operation and fewer maintenance costs throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade car lifts, as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

    TWO-STAGE TELESCOPING SCREW PAD ASSEMBLY KIT

    The XPR-10S features double-telescoping screw pads with gouge and tear-resistant polyurethane pads to help increase workplace safety and reduce operating costs. A set of our 63 mm stacking adapters is included with the purchase of a lift.

     

    FEATURES

    • 10,000‐lb. lifting capacity
    • Expandable top beam accommodates wide or narrow drive‐thru configuration
    • Double‐telescoping screw pads offer increased versatility
    • Padded overhead safety shutoff bar
    • Telescoping arm design for more versatile arm positioning
    • Single‐piece columns
    • Single‐point safety release
    • Drop‐end arms provide a lower pad height
    • Dual hydraulic direct‐drive cylinders
    • Oversized 53" tall carriage for superior strength and durability
    • Electric / hydraulic power system
    • Large, 17" x 19" A36 steel base plate
    • Self‐lubricating dura‐glide UHMW polyethylene bearing system
    • Safety locks in each column spaced every 3"
    • Plated arm restraints and arm pins for rust prevention
    • Heavy‐duty 1/2" aircraft‐quality equalizer cables
    • Oversized cable sheave diameter reduces cable fatigue
    • 4‐piece 63 mm stackable adapter set comes standard
    • Triple‐telescoping front arms
    • ETL Approved

    XPR-10S OPTIONS

    Low-Profile Arms
    XPR-10S-LP
    5175396
    Two-stage, low-profile arms
    Optional
    Bolt-On Extension
    XPR-10S-168
    5175399
    Added 24" height clearance
    Included
    Combo
    XPR-10S-168-LP
    5175400
    Increased height and low-profile arms
    Optional

    BendPak Symmetrical Two-Post Car Lift

 Product Videos

My New BendPak 2-Post Lift!
  • My New BendPak 2-Post Lift!
    In this episode we review, install and test our new BendPak XP...
  • This is my BendPak - Da Rod Shop - BendPak 2-post XPR-10A-168
    Steve, from the popular TV Show "Da Rod Shop" Tells us about h...
  • BendPak New Two-Post Screw Pad Adapter Demo
    New telescoping screw pads from BendPak fit BendPak’s new 9,00...

 Warranty Information

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance



 Find Similar Products by Tag

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2019 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak XPR-10S-168 Extra Tall, Dual-Width, 10,000 Lb. Capacity, Clearfloor to your wish list.