Loading... Please wait...


BendPak PL-18000 Four Level Four Post Parking Lift -Special Order

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
RRP: $23,305.00
$19,500.00 (You save $3,805.00)
Free Shipping

 Product Description

BendPak PL-18000 14,000 LB  Tri Level Platform Assembly
The PL-18000 by BendPak is a 4-post parking lift designed for indoor or outdoor operation and is the most cost effective way to increase the capacity of typical parking areas. The quad-stacker PL-18000 is the ultimate space saver allowing four vehicles to be stacked in a single parking space. Shared, ganged columns increase value by reducing the number of components required for multi-unit installations. Each lift uses a specially designed base frame that distributes the load making these unique lifting systems suitable for installation on virtually any residential or commercial concrete floor.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

*18,000-pound lifting capacity 
*Overall Width 114"
*Overall Lenght 193"
*Platform Width 95"
*Platform Lenght 155"
*Overall Height 640"
  pdf.catalog.jpg    pdf.instructions.jpg            5-2-1-warranty.jpg

 Parking Lifts by BendPak


SKU# 5175460

18,000-lb. Capacity / 4-Level Parking Lift / Commercial Parking / SPECIAL ORDER

The quad car stacker PL-18000 parking lift allows four vehicles to be stacked in a single parking space. Shared, ganged columns reduce the number of components (as well as the cost) required for multi-unit installations. The base frame on this lift is made to distribute the load throughout the entire structure for maximum safety and usability on virtually any concrete floor.

PL-18000 Specifications


Style:Multi-Level Parking Lift
Overall Width 119" (3,023 mm)
Overall Length 194" (4,931 mm)
Overall Height 360" (9,144 mm)
Upper Platform Spacing98" (2,493 mm)
Second Platform Spacing76" (1,933 mm)
First Platform Spacing 77" (1,954 mm)
Floor Level Spacing 78.5" (1,994 mm)
Drive-Thru Clearance 91" (2,316 mm)
Standard Motor208-230-volt, 380-volt or 440-volt
Ramp Locking Positions3
Lock Spacing 80” (2,032 mm)
Lifting Time 210 seconds

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


  • 6,000 lb. capacity per deck / 18,000 lb. capacity total
  • Superstructure features durable powder-coat finish
  • Perfect for cars, light trucks, motorcycles and ATV’s
  • Rugged I-beam and C-channel construction
  • Single hydraulic cylinder with heavy-duty steel lifting cable
  • Built-in wheel stops
  • Heavy-duty steel construction
  • Wide base-plate for maximum stability
  • Reliable electric-hydraulic power system
  • Front and rear wheel chocks
  • Full-width platform to keep bottom vehicles protected
  • Two-position fail safe locking system
  • Simple controls

Stack Four Vehicles in a Single Parking Space

The PL-18000 by BendPak is a quad-stacking parking lift designed for both indoor and outdoor lifting and parking operations, and it is engineered to be the most cost-effective way to safely stack four vehicles. Each PL-18000 unit uses a specially designed base frame that distributes the load, making these unique lifting systems suitable for installation on the concrete floor of any home or professional shop.

4x the charm

This ​parking lift is perfect for cars, light trucks and SUVs. A single unit can be modified to share columns with multiple units, thus safely reducing the number of columns you need to purchase or install. This setup is ideal for commercial garages looking to exponentially increase their parking space. Each of the three platforms supports 6,000 lbs.., and the structure utilizes both a hydraulic lifting cylinder and an aircraft-quality stainless steel cable system.

The parking lift platforms are full-width and protect the vehicles beneath: no leaks or spills from above will affect the lower-level vehicles. Just like BendPak’s other car lifts, automatic safety locks engage as the lift rises, and an ergonomically placed hydraulic power unit is easy to start or shut off on command. BendPak’s own leak-proof cylinder technology ensures our hydraulic system is maintenance-free for years to come.

BendPak’s superior engineering really outdid itself with the multi-stacking PL-14000 and PL-18000 parking lifts. Commercial garages can power multiple lift structures using a single, electric-hydraulic pump on each unit or a multi-unit power pump station that is capable of powering up to 10 BendPak parking lift units (number may vary).

These state-of-the-art car lift systems are well-suited for commercial parking environments and are powered by independent electric-hydraulic pump units or a multi-unit power station pump system that can operate up to 10 lifts, depending on the configuration, layout and other technical factors. The PL-18000 can be configured for 208-230V, 380V or 440V operations and international voltage is available. Multi-unit pump systems require their own dedicated 3-phase power circuit.

Customize your lift

If you have a ceiling high enough for a triple-stacker, BendPak offers models with overall heights of 211" / 235" / 281", and these lifts are fully customizable. The PL-1​8000XL parking lift, for instance, comes with an extended frame, so limousines and other extended-length vehicles can be lifted with ease. Each model features a set of unique closeout legs that are available for purchase. These ​parking lift sets are sold separately.


 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak PL-18000 Four Level Four Post Parking Lift -Special Order to your wish list.