Loading... Please wait...


BendPak PL-14000 Tri Level Platform Assembly

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
RRP: $16,960.00
$14,190.00 (You save $2,770.00)
Free Shipping

 Product Description

BendPak PL-14000 14,000 LB  Tri Level Platform Assembly
The PL‐14000 by BendPak is a 4‐post parking lift designed for indoor or outdoor operation and is the most cost effective way to triple the capacity of typical parking areas. The 3‐stacker PL‐14000 is the ultimate space saver allowing three vehicles to be stacked in a single parking space.


PL-14000 Triple Stacker Parking Lift Platforms  auto stacker parking car liftPL-14000 Triple Stacker Parking Lift Customer Photos  auto stacker parking car lift

*14,000-pound lifting capacity 
*Overall Width 114"
*Overall Lenght 193"
*Platform Widht 95"
*Platform Lenght 155"
*Overall Height 280"
  viewbrochureblue.jpg   dowbloadmanualblue.jpg   5-2-1-warranty.jpg


 Parking Lifts by BendPak


SKU# 5175440

14,000-lb. Capacity / 3-Level Parking Lift / Multiple Heights / SPECIAL ORDER

BendPak’s PL‐14000 parking lift is designed for indoor or outdoor operation and is the most cost-effective way to triple the capacity of typical parking areas. Each three-stacker model is the ultimate space saver, allowing three vehicles to be stacked in a single parking space. With multiple frame dimensions and closeout leg options to choose from, the perfect three-level auto stacker is incredibly durable and smooth-running. It’s built to last for years without heavy maintenance.

PL-14000 Specifications


Style:Multi-Level Parking Lift


Lifting Capacity:14,000 lbs. (6,350 kg)
Overall Width 119” (3,023 mm)
Overall Length 194" (4,931 mm)
Platform Length 137" (3,480 mm)
Overall Height 280.3” (7,121 mm)
Upper platform spacing 96.5” (2,451 mm)
Middle platform spacing 75.5” (1,921 mm)
Bottom Spacing 82.5” (2,100 mm)
Drive-thru clearance 91” (2,316 mm)
Lifting time 145 seconds
Voltages 208-230-V, 380-V or 440-V

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.


  • 7,000-lb. capacity per deck / 14,000-lb. capacity total
  • Perfect for cars, light trucks, motorcycles and ATVs
  • Rugged I-beam and C-channel construction
  • Built-in wheel stops
  • Wide base-plate for maximum stability
  • Front and rear wheel chocks
  • Two-position fail-safe locking system
  • Superstructure features durable powder-coat finish
  • Single hydraulic cylinder with heavy-duty steel lifting cable
  • Heavy-duty steel construction
  • Reliable electric-hydraulic power system
  • Full-width platform to keep bottom vehicles protected
  • Simple controls
  • Oversized sheave diameter reduces cable fatigue
  • High-speed lifting
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Inside runways adjust for different tread widths
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available

Go Three High to the Sky

The PL-14000 by BendPak is a four-post parking lift designed for both indoor and outdoor lifting and parking operations. It's engineered to be the most cost-effective way to triple the capacity of a typical parking area. Shared, ganged columns increase value by reducing the number of components required for multi-unit installations. Each triple stacker parking lift uses a specially designed base frame that distributes the load, making these unique lifting systems suitable for installation on virtually any residential or commercial concrete floor.

Stack three vehicles in a single parking spot

The PL-14000 parking lift by BendPak can accommodate both cars and SUVs and may be configured as a stand-alone parking lift or combined into rows of multiple units. Each deck supports up to 7,000 lbs. When installed in rows of multiple units, the lifts share columns, dramatically increasing space efficiency. The rugged frame utilizes a dependable hydraulic and cable-based lifting system for ultimate efficiency and safe operation.

Each stacking parking lift system incorporates many distinctive features, such as a full-width platform to keep bottom vehicles protected, a single hydraulic lifting cylinder combined with heavy-duty steel lifting cable, automatic safety locks and reliable and an ergonomic hydraulic power unit. Leak-proof cylinder technology is only available for BendPak four-post lifts.

These state-of-the-art lifting systems are well-suited for commercial parking environments and are powered by independent electric-hydraulic pump units or a multi-unit power station pump system that can operate up to 10 lifts, depending on the configuration, layout and other technical factors. They can be configured for 208-230V, 380V or 440V operations, with international voltages also available. Multi-unit pump systems require their own dedicated 3-phase power circuit.

At BendPak, we believe in creating solutions that simplify your life. Our history of manufacturing excellence began more than 50 years ago, and we continue to design and manufacture innovative car lift solutions with features and operating characteristics that meet customer requirements for quality, reliability, safety and value.

Customize your lift

If you have a ceiling high enough for a triple-stacker, BendPak offers models with overall heights of 211" / 235" / 281", and these lifts are fully customizable. The PL-14000XL, for instance, comes with an extended frame, so limousines and other extended-length vehicles can be lifted with ease. Each model features a set of unique closeout legs that are available for purchase. These sets are sold separately.


 Product Videos

Huge Parking Lift - Triple Stacker PL-14000 by BendPak
  • Huge Parking Lift - Triple Stacker PL-14000 by BendPak
    More info on this great parking lift: http://bit.ly/SiAeXiBend...

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak PL-14000 Tri Level Platform Assembly to your wish list.