Loading... Please wait...


BendPak HDS-35X Extended 4-Post Lift 35000LB Cap.

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
RRP: $26,150.00
$21,880.00 (You save $4,270.00)
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description

BendPak 4-Post Lift HDS-35X  Extended Lenght 35,000 LB Capacity  Heavy Duty Truck Lift
BendPak's newest line of heavy-duty four-post truck lifts are here. Bigger sheaves, beefier components and a legacy of dependability--get your hands on these massive machines and bring a higher level of service to your garage or shop.


*35,000-pound lifting capacity 
*Overall 154" Wide
*Overall Lenght 357"
*Height of Colums 93"
*Lenght of Run Ways 323"
*Max Rise 60"
*Lifting Time 75 sec.
*Motor 220 VAC/1 Ph

pdf.instructions.jpg      pdf.catalog.jpg            5-2-1-warranty.jpg


Four-Post Lifts by BendPak


SKU# 5175168

35,000-lb. Capacity / Four-Post Lift / Extended

This incredible four-post truck lift handles Class 8 - 9 trucks, buses and military craft. Extended-length vehicles have 323" of runway to work with, which is more than enough for virtually everything in this weight class.



Lifting Capacity*35,000 lbs. (15,876 kg)
*Max Capacity / Front Axle17,500 lbs. (7,938 kg)
*Max Capacity / Rear Axle17,500 lbs. (7,938 kg)


A - Min. Runway Height:8.5" (216 mm)
B - Max. Rise:60" (1,524 mm)
C - Max. Lifting Height:68.5" (1,740 mm)
Time to Full Rise:75 seconds

Outside Dimensions

D - Overall Width:154" (3,912 mm)
E - Outside Length:317" (8,052 mm)
F - Overall Length:357" (9,068 mm)
G - Height of Columns:93" (2,362 mm)

Inside Dimensions

H - Width Between Columns:134" (3,404 mm)
I - Drive-Thru Clearance:109" (2,769 mm)


J - Runway Width:28" (711 mm)
K - Length of Runways:323" (8,204 mm)
L - Width Between Runways:36" (914 mm) or 47" (1,194 mm)
M - Runway Centerline:64" (1,626 mm) or 75" (1,905 mm)
N - Outside Edge of Runways:92" (2,337 mm) or 103" (2,616 mm)

Minimum Wheelbase

Rated Capacity:230" (5,842 mm)
75% Capacity:195" (4,953 mm)
50% Capacity:165" (4,191 mm)
25% Capacity:130" (3,302 mm)


Locking Positions:9
Lock Spacing:Every 6" (152 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.



  • 35,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Extended-length runways
  • Supersized 12" diameter cable sheaves
  • Stainless steel lifting cables
  • Grease nipples
  • Single hydraulic under-runway cylinder
  • Integrated flow restrictor
  • Durable powder coat
  • Spring-loaded safety locks
  • Second lock system on constant guard
  • Fully enclosed lifting cables
  • Multiple adjustable height locking positions
  • Maintenance-free electric hydraulic power system
  • Conveniently positioned operator controls
  • 12" x 12" base plates
  • Non-skid runways
  • Optional rolling jacks

Our Extended-Length 35,000-lb. Truck Lift

Get ready to lift some massive vehicles. If you need a 35,000-lb. capacity truck lift with significantly extended runways, the HDS35X is just the ticket to smoothly handle wide wheel bases, extended dimensions and virtually every truck in this weight class. Roadside truck repair stations and full-sized commercial fleets want to be ready for virtually anything. Government contractors should consider this lift for military applications. Tanks and military transport vehicles are some of the most valuable machines in the world, and we're proud that our nation's private shops, as well as government entities, routinely trust the nation's finest with BendPak's best.

Super-long runways

Massive 323" runways are ideal for commercial fleets of all kinds. There aren't many semis or military land crafts that this lift can't accommodate. Most shops won't have a machine this size in the bay, so if trucks are in your wheelhouse, this car lift will set you apart from the rest.

Dual-hub cable sheaves

We put all our engineering prowess into keeping the HDS35X. After all, this is an incredibly heavy-duty lift, and on top of that, the runways are much longer than the ones on our standard-length model. To relieve pressure of the columns and ensure years of reliable lifting (decades, in many cases), BendPak utilizes 12" diameter cable sheaves with 4" axles. At that size, they're unlikely to wear out or ever need maintenance.

Large base plates

Our heaviest-duty 12" x 12" base plates handle all 35,000 lbs. of daily stress we expect you to put on this truck lift. Wider bases reduce stress put on the columns, and we promise to match the superior lifting power you need with the sturdiest structure money can buy.

Spring-loaded safety locks

Auto-engaging locks click into place as the lift rises. All locks connect simultaneously, thanks to a built-in flow divider that moves the platforms evenly. With the push of a button, all locks release together for a safe descent.

Secondary lock system

A secondary cable-slack detection system activates the moment slack is detected in the cables, safely stopping and locking the platforms in place until operators can figure out what's wrong. Of course, these failures are practically unheard of when lifts are properly used and maintained. We don't want here to be any question that the HDS35X offers best-in-class power and safety standards. Many other "top" brands don't even both with secondary safety locks, sadly.

Rolling bridge jacks

The RBJ25000 is an incredibly powerful bridge jack that hoists up to 25,000 lbs. in just a few easy pumps. Massive trucks and commercial vehicles are often unbalanced—their centers of gravity aren't dead-center on the vehicles. We over-engineered this jack to ensure that operators can safely lift an entire semi-truck with just two jacks, without straining the jack, your back or dropping the truck.


 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2019 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HDS-35X Extended 4-Post Lift 35000LB Cap. to your wish list.