Loading... Please wait...

Categories

Bendpak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
BendPak
RRP: $3,885.00
$3,250.00 (You save $635.00)
SKU:
5175120
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.

 

Lifting capacity: 7,000 lbs.
Overall width: 116-3/4"
Overall length: 189"
Height of columns: 100"
Max rise: 82"
Length of runways: 164"
Motor: 220 VAC / 1 Ph

   pdf.catalog.jpg   pdf.instructions.jpg     ali-etl-logo.jpg5-2-1-warranty.jpg

  •  

    Four-Post Lifts by BendPak

    HD-7W

    SKU# 5175120

    7,000-lb. Capacity / Wide Car Lift / High Rise


    BendPak's HD-7W is the standard-width car lift model in the HD-7 series. With a 110.25” overall width and a spacious 100.25” spread between the columns, there’s plenty of room to park most cars and trucks in the lower position. This also leaves ample space for you to maneuver freely while you work on your car.

    7w.jpg

    Capacity

    Lifting Capacity*7,000 lbs. (3,175 kg)
    *Max Capacity / Front Axle3,500 lbs. (1,588 kg)
    *Max Capacity / Rear Axle3,500 lbs. (1,588 kg)

    Rise

    A - Min. Runway Height:435" (11,049 mm)
    B - Max. Rise:82" (2,083 mm)
    C - Max. Lifting Height:86.5" (2,197 mm)
    Time to Full Rise:35 seconds

    Outside Dimensions

    D - Overall Width:116.75" (2,965 mm)
    E - Outside Length:174" (4,420 mm)
    F - Overall Length:189" (4,801 mm)
    G - Height of Columns:100" (2,540 mm)

    Inside Dimensions

    H - Width Between Columns:106.75" (2,711 mm)
    I - Drive-Thru Clearance:93.5" (2,375 mm)

    Runways

    J - Runway Width:19" (483 mm)
    K - Length of Runways:164" (4,166 mm)
    L - Width Between Runways:37.5" (953 mm) or 44.375" (1,127 mm)
    M - Runway Centerline:56.5" (1,435 mm) or 63.375" (1,610 mm)
    N - Outside Edge of Runways:75.5" (1,918 mm) or 82.375" (2,092 mm)

    Minimum Wheelbase

    Rated Capacity:115" (2,921 mm)
    75% Capacity:100" (2,540 mm)
    50% Capacity:85" (2,159 mm)
    25% Capacity:70" (1,778 mm)

    Locking

    Locking Positions:15
    Lock Spacing:Every 4" (102 mm)

    Power Unit

    Motor:220 VAC / 60 Hz / 1 Ph
    Noise:45 dB

    Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

     

    Dependable, Light-Duty 7,000-lb. Capacity Four-Post Lift

    The 7,000-lb. capacity HD-7W is ideal for shops that want the versatility to park sports cars, sedans, light-duty trucks and SUVs in the same structure. There's even enough side clearance to accommodate larger truck mirrors. Even so, this lift is only slightly larger than a typical parking space. Due to its reduced footprint, as well as its ability to house a variety of vehicle types in a low-ceiling garage, the HD-7W is an extremely attractive parking and maintenance solution for both homeowners and professional technicians.

    Dependable design

    The HD-7W features four stainless steel wire ropes, as well as a lone hydraulic cylinder that remains tucked underneath the runway. This powerful cylinder ensures you get a super-durable design that requires minimal maintenance over time.

    Dual-hub wire rope sheaves

    Larger wire rope sheaves prevent undue wear-and-tear on the four-post lift's axles, wire rope and even the sheaves themselves. Dual-hub and oversized sheaves provide a safer product that lasts longer and costs less to maintain. The larger the sheave, the less friction against the components, so we make every single sheave larger than necessary. Typically speaking, the bigger the lift, the bigger the sheave!

    Multi-level locking positions

    Parking and service height is totally up to you. Every few inches, the columns will automatically lock into place; simply lower the runways onto the lock as they move over it. Push-button controls will release all four locks together.

    Secondary safety locks

    A secondary lock system acts as a slack-cable device that catches the runways and keeps your vehicle level in case any dangerous cable slack develops. The lift will not be operational until you have a chance to resolve the issue.

    Heavy-duty aircraft wire rope

    Extremely powerful stainless steel wire ropes are rated at 14,400 lbs. each. They're called "aircraft quality" for a reason! The combined rating of these cables is more than 822% of the entire lift’s maximum lifting capacity, and all wire rope is fully enclosed within the lift structure.

    Electric-hydraulic power system

    A zero-service power unit is incorporated into the four-post lift structure. Dependable, long-lasting and extremely safe, it's always close at hand for your convenience.

    Large base plates

    10" x 12" base plates provide a stable yet minimal footprint for the HD-7W. Your four-post lift is as structurally sound as any car lift ever made.

    Caster kit

    A rugged, 4-piece caster kit makes your lift mobile, so you can get it out of the way for other service jobs or to simply park your vehicles in a different park of the garage. Foot-lock casters work with or without a vehicle raised on the runways.

    Integrated design

    For your safety and convenience, and to improve the aesthetics of your BendPak lift, the critical lifting components (e.g., airlines, safety latches and wire rope sheaves) are all fully enclosed within the columns of the lift.

    Low-deck runways

    Low-profile, 4.5" high runways make it easy to load vehicles onto the lift. Lower runways mean less time driving up the approach ramps; the result is a safer, easier approach.

    Longer approach ramps

    The effectiveness of the lowered runways is bolstered by gentle approach ramps that won't damage low-riding vehicles. Extended-length approach ramps permit drivers of all experience levels to load vehicles onto the runways without scratching the front ends of low-riding cars.

     

     

 Warranty Information

BendPak WARRANTY
BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak X-Rack Scissors Lifts are warranted for 18 months
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Low-Rise Lifts and Rolling Jacks are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak MCL Mobile Column Lifts are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tubing Benders are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Motors, hydraulic cylinders, valves, switches and all other assembly components and tooling are warranted for one year against defects in material or workm anship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tri-Max Series Air Compressors are warranted for five years
on the compressor tank, two years on the compressor pump and one year on the electric motor and all other assembly components such as valves and switches against defects in material or workmanship under normal use. The five-year tank warranty will apply to ASME air receivers only if they are installed on rubber anti-vibration pads or approved equivalent. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

These warranties do not extend to...
defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance;
damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) and/or other accompanying instructions supplied;
normal wear items or service normally required to maintain the product in a safe operating condition;
any component damaged in shipment;
•other items not listed but may be considered general wear parts;
damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear parts. BendPak reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Bendpak HD-7W 7,000-lb. Capacity Short Runways Extra-Wide, Extra-Tall Car Lift to your wish list.