null
BendPak

BendPak HD-14T 14000LB Cap. Tall Lift

Write a Review
SKU:
5175004
UPC:
5175004
Availability:
FACTORY SHIPPED
Minimum Purchase:
1 unit
Shipping:
Free Shipping
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
  • BendPak HD-14T 14000LB Cap. Tall Lift
$8,335.00
$7,895.00
— You save $440.00

Description

 

BendPak 4-Post Lift HD-14T  4-Post 14,000 LB Capacity 82" Rise
The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. It’s just another way that BendPak tailors our lifts to suit your needs. With this four-post lift, you can push 14,000 pounds worth of automobile into the air without breaking a sweat. This model is available with optional drive-thru ramps, dip-trays and 7,000-lb. capacity rolling jacks.

 

 

Quick Specs

Lifting capacity: 14,000 lbs.
Overall width: 126"
Overall length: 234"
Height of columns: 101"
Max rise: 82"
Length of runways: 191"
Motor: 220 VAC / 1 Ph
   

   

pdf.instructions.jpg        pdf.catalog.jpg                5-2-1-warranty.jpg

 

 Four-Post Lifts by BendPak

HD-14T

SKU# 5175004

14,000-lb. Capacity / Four-Post Lift / Tall Lift / 82" Rise


The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 pounds worth of automobile into the air without breaking a sweat. This model is available with optional drive-thru ramps, drip-trays and 7,000-lb. capacity rolling jacks.

14t.jpg

Capacity

Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle7,000 lbs. (3,175 kg)

Rise

A - Min. Runway Height:7.625" (194 mm)
B - Max. Rise:82" (2,083 mm)
C - Max. Lifting Height:86.5" (2,197 mm)
Time to Full Rise:65 seconds

Outside Dimensions

D - Overall Width:126" (3,200 mm)
E - Outside Length:205" (5,207 mm)
F - Overall Length:234" (5,944 mm)
G - Height of Columns:101" (2,565 mm)

Inside Dimensions

H - Width Between Columns:115.5" (2,934 mm)
I - Drive-Thru Clearance:98" (2,489 mm)

Runways

J - Runway Width:20" (508 mm)
K - Length of Runways:191" (4,851 mm)
L - Width Between Runways:37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:77.5" (1,969 mm) or 91" (2,311 mm)

Minimum Wheelbase

Rated Capacity:140" (3,556 mm)
75% Capacity:120" (3,048 mm)
50% Capacity:100" (2,540 mm)
25% Capacity:80" (2,032 mm)

Locking

Locking Positions:16
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Features

  • 14,000-lb. lifting capacity
  • Extra lift height
  • Long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks, and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Hardened-steel sheaves with self-lubricating bearings
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional RJ-7 air-hydraulic bridge jacks increase service capability

 

 

More Height​ in a 14,000-lb. Lift

The HD-14T offers superior lifting power with an extended 82” rise, which means if we were a clothing warehouse, this car lift would be found in our “big and tall” section. Commercial fleets of trucks and vans will be right at home in your service bay with this model. Impress your customers by accommodating a wider variety than the competition, no matter what vehicles they bring in.

Extended runways

Longer runways are necessary for heavy-duty lifts. This four-post lift boasts runways long enough to handle large trucks and SUVs. Plus, longer runways prevent damage to the vehicle; we also extend the approach ramps in order to protect the bottom-front of the chassis.

Dual-hub cable sheaves

BendPak cable sheaves are huge: 10.5” diameter sheaves and 2.25” diameter sheave axles, all kept within the runway and cross tubes. This cuts down on how much time and cash you have to spend on maintenance and general upkeep.

Heavy-duty aircraft cable

Each BendPak lift in this series features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have an incredible breaking strength of over 14,000 lbs. each.

Built-in lubrication

Grease fittings on the sheaves and sheave axles ensure proper lubrication for these critical parts.

Flow restrictor

Keeping the runways level during rise is arguably the most important part of lifting a car. That’s why BendPak insists on upholding the best safety standards in the industry. The integrated flow restrictor ensures a slow, controlled descent in the very rare case of hydraulic hose failure.

Large base plates

10" x 12" base plates keep this four-post lift safe, stable and always ready for service.

Spring-loaded safety locks

Automatic locks activate as the runways rise. Adjustable safety ladders make sure the ramps are level, even if there is a slight slope in the garage flooring. This incredibly useful safety precaution adds to the versatility of the lift.

Push-button pneumatic lock release

With the push of a button, a pneumatic (air-powered) lock release lets operators lower the lift with ease. Aircraft-quality stainless steel and aluminum pneumatic cylinders are the most durable and trouble-free you’re bound to find on a car lift.

Secondary lock system

The all-important backup slack-cable detection system comes standard on this four-post lift (as well as every other lift we make). Others don’t have it. We refuse to leave you without it. Peace-of-mind is everything in the lifting business, so we give it in spades.

Integrated design

Hidden internal components keep them protected from environmental damage, as well as human interference.

Adjustable height locking positions

Fully adjustable, multiple lock positions let you work at the height most convenient for you.

Electric-hydraulic power system

Let the power system do the lifting while you worry about the work. A dependable, zero-maintenance system keeps all controls right at your fingertips.

Non-skid runways

The runways of the HD-14T four-post lift grab your wheel securely, so when you put your vehicle in park and tell it to stay put, it stays put.

Longer approach ramps

The longer the approach ramp, the easier it is to load low-stance cars. High-clearance trucks and SUVs don’t usually have this concern, but we’re sure to keep your lift as versatile as possible.

Flexible protective conduit

ALI-certified cabQle tubing protects against electric shocks. It also prevents wear and tear that occurs over time. Unprotected cables are a serious concern, and BendPak takes away the worry with our flexible, non-metallic tubing.

Rolling bridge jacks

We recommend the optional 7,000-lb. capacity rolling jack (model RJ-7), so you can perform wheel service on your lift. These frame-engaging jacks lift the vehicle off the four-post lift’s runway. Two jacks used together will let you raise all four wheels off the car lift at once!

 

 

View AllClose

Warranty Information

Better Products – Better Service – Better Value For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability. Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first. » Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure » Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit » One Year (12-Months) Labor Warranty on site or at factory » One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
View AllClose

0 Reviews

View AllClose