Loading... Please wait...


Atlas® Apex-10H ALI Certified Overhead 2 Post Car Lift (EXTRA TALL)

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
RRP: $3,900.00
$3,495.00 (You save $405.00)
Free Shipping
Commercial address and I have a Fork Lift:
Residential address and I have a Fork Lift:
Pls. drop off at a freight terminal:

 Product Description


Atlas® Apex-10H ALI Certified Overhead 2 Post Car Lift (EXTRA TALL- 164" ) 

The ALI CERTIFIED Atlas® Apex-10H is the taller version of the Atlas Apex 10. The overhead beam (that connects the two columns) is positioned two feet higher than the overhead beam on the Atlas Apex 10. The taller position of the overhead beam allows the Atlas® Apex-10H above ground hoist to lift "taller vehicles" such as "ladder rack trucks" and cargo vans. 

The Atlas® Apex-10H was engineered and built to offer a commercial grade above ground lift to those customers who have "fallen in love" with the Double S column design and asymmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired. 

The Atlas® Apex-10H can be installed with the columns positioned symmetrically. When the Apex columns are installed in the symmetric configuration there is more width between the columns. Please check the specifications page and picture gallery to determine which height setting would be the best for your application. The three stage front arm design offers easy vehicle access and superior vehicle lift point support. 

The Atlas® Apex-10H features three (3) stage telescoping front armsdouble screw rubber/metal adapters with truck height extensionsprotective rubber pads mounted to the carriage , rubber column guards, and a price that cannot be matched. 

Compare the Atlas® Apex-10H to "The Original" and you will discover that you really do get MORE lift with MORE features at a MUCH BETTER PRICE when you buy the Atlas® brand. 


  • Extra overall height: 164" (13' 8")
  • 10,000 lb. Capacity
  • Column design incorporates special Double S bends to increase column strength.
  • Padded Carriages
  • Automatic Shut-Off Bar
  • Symmetric Columns
  • Professional grade arm lock restraint system
  • Higher quality powder coating
  • Single point lock release
  • Double screw-up adapter kit included
  • Truck adapter set included
  • Mounting Hardware Included
  • 3 stage front arms and 2 stage rear arms offer more options
  • Shipping Weight: 1,850 LB.


  • 5 Year Structural & 2 Year Hydraulic Warranty
  • Apex 10 Installation
  • Free 8 Piece Truck Adapter Set
  • Automatic Arm Restraints
  • Door Guard
  • Double S Column Design
  • Double Screw Up Adapters
  • Single Point Lock Release
  • Symmetric Columns And Super Symmetric Arms
  • Truck Adapter Holder
  • CE Tested And Approved
  • Direct Drive Cylinder Bleed
  • Electrical Requirements
  • Overhead Configuration




Atlas® Apex-10H Specifications
Setup High Low (requires spacers)*
Capacity 10,000 LB. 10,000 LB.
Lifting Time Ask Your Salesperson Ask Your Salesperson
Front Arm Length (43 1/2" - Max); (31 1/4" - Mid); 
(22" - Min)
Rear Arm Length (58" - Max); (35" - Min)
Overall Height 164" (13' 8") 160" (13' 4")*
Overall Width 135 1/4" (11' 3 1/4") (Symmetrical)
Outside Column to Outside Column 127 1/2" (10' 7") (Symmetrical)
Maximum Lift Height (With Adapters) 81 1/2" (6' 9 1/2")
(highest pad setting)
79 1/4" (6' 7 1/4")
(lowest pad setting)
81 1/2" (6' 9 1/2")
(highest pad setting)
79 1/4" (6' 7 1/4")
(lowest pad setting)
Maximum Lift Height
(Without Adapters)
70" (5' 10") (lowest pad setting),
72 1/2" (6' 1/2") (highest pad setting)
70" (5' 10") (lowest pad setting),
72 1/2" (6' 1/2") (highest pad setting)
Pad Height 4"  
Adapter Heights 3" & 6"  
Minimum Arm Height 4 1/2"  
Between Columns 112 1/2" (9' 4 1/2") (Symmetrical)  
Column Size 10 1/4" x 7"  
Drive Through 99 1/2" (8' 3"1/2") (Symmetrical)  
Base of Lift 18" x 15"  
Shut-Off Height 158" (13' 2") 154" (12' 10")*
Cable .315" (8mm)  
Column Thickness of Steel 6mm / double S column design increases column strength
Carriage Thickness of Steel Frame: 8mm
Yoke: 16mm
Arms Thickness of Steel Frame: 6mm
Telescopic Arm: 8mm
Shipping Weight 1,850 Lbs.


Requires a minimum of 4" of concrete with 3000 psi.

All lifts come with a step by step instruction manual.

*See manual for installing spacers for lower height.


 Product Videos

Atlas® APEX 15 - ALI Certified, Overhead 2 Post Lift, 15,000 lb Capacity
  • Atlas® APEX 15 - ALI Certified, Overhead 2 Post Lift, 15,000 lb Capacity
  • Atlas® Apex 10 - Certified Overhead 10,000 lb Capacity Two Post Lift
    http://www.gregsmithequipment.com/Atlas-Apex-10-Plus - The 10,...

 Warranty Information

ATLAS Equipment Sales offers a two year LIMITED structural parts warranty on all Atlas Lifts. Atlas Equipment Sales warrants the equipment to the original purchaser against defects in material or workmanship under normal use for a period of one year from the date of purchase. This limited warranty shall be limited to the repair or replacement of materials or parts found defective, at the discretion of


Our LIMITED warranty policy (two year parts only) does not include a labor warranty. Our products are sold at such a competitive price that Atlas Equipment cannot afford to send technicians into the field to repair the Atlas wheel balancers. We assume that the buyer of our wheel balancer is mechanically inclined or has employees that are mechanically inclined.

Our wheel balancers are built with “plug and play” parts that make repairs very easy. This is the same philosophy that the Personal Computer Industry has used for many years.

We offer a toll free number (800-768-4104) for service and parts information. This toll free number is directed to Atlas Indianapolis, IN. location. The service and parts department is open from 8 am to 5 pm EST from Monday to Friday. The department is SOMETIMES open on Saturdays, subject to the availability of our service technicians.

There are certain parts that are considered “wear items” and are NOT included in the one year warranty. Parts that have been subjected to abuse will NOT be considered for warranty.


If you think that a wheel balancer should perform flawlessly for many years WITHOUT a normal amount of maintenance; then do not buy our wheel balancer. You are living in a fantasy world.

Our LIMITED warranty policy (one year parts) requires the alleged defective part to be returned to Atlas Equipment Sales (freight ppd.-customer pays the freight) BEFORE the replacement part can be sent out. If the defective part is an integral part of the machine, and the loss of this part will not allow the machine to work properly, Atlas Equipment Sales can waive the “normal” return policy in certain situations so there is minimal down time for the operator. If necessary Atlas Equipment Sales can charge the customer’s credit card for the replacement part when the part is shipped and then credit the amount of the part when the defective part is returned. To expedite a part replacement or exchange, the use of a digital photo is the best answer. If the customer will furnish Atlas Equipment Sales with digital photos that identify a broken part or some other issue; then our service techs may waive the need for an old part to be returned. The replacement part can be shipped the same day. A digital photo leaves nothing to the imagination. Our service technicians can only help if they are provided with the most accurate information. We encourage the use of digital photos to help speed the process.

Atlas Equipment has a service department with an excellent reputation. The old adage that compares the attitude of the customer to the type of service received rings true for Atlas Equipment Sales. We sell quality products with very few warranty issues. When there is a warranty issue (or an out of warranty issue) we want to get the customer back in business as quickly as possible. A good attitude from the Atlas service technician coupled with a positive attitude from the customer will produce a satisfactory outcome for both parties.

Returned goods must be authorized to be returned (in writing) by Atlas Equipment Sales and must be prepaid to a designated location. All returns are subject to a 15% handling/restocking charge. Returned goods must be in like-new condition complete with warranty and original shipping papers.

If you have any questions about our products or warranties, please ask your sales representative.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2019 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Atlas® Apex-10H ALI Certified Overhead 2 Post Car Lift (EXTRA TALL) to your wish list.