ATLAS
Atlas® Pro-9D Overhead 9,000 lbs. Capacity 2 Post Lift
- SKU:
- ATEXH-PRO-9D-FPD
- UPC:
- XH-PRO-9D
- Availability:
- FACTORY SHIPPED
- Shipping:
- Free Shipping
Description
Features Information
- 2 Post Secondary Lock System
- 5 Year Structural & 2 Year Hydraulic Warranty
- Asymmetric/Symmetric Arm Design
- Electrical Requirements
- Overhead Configuration
- Single Point Lock Release
Atlas® Pro-9D Overhead 9,000 lbs. Capacity 2 Post Lift
The Atlas® Pro-9D is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price. The Atlas® Pro-9D can be adjusted to two different height settings: 11' 6" or 11' 10".
We test our competitors’ lifts and our Atlas® lifts. GET SERIOUS…GET ATLAS®.
The Atlas® Pro-9D has symmetric columns and specially designed arms that can be set in either the symmetric or asymmetric position. The asymmetric/symmetric arm design offers an extremely low lift pad position on the EZ-metric lift arm configuration. This low pad height will allow the operator to position the lift arms under most small cars (with low pick up points) and heavier pick up trucks.
The Atlas® Pro-9D includes: a complete set of solid peg type truck adapters, mounting hardware, a set of sliding lift point adapters, and a 220 volt single phase power unit that can be mounted on either side of the lift. (The power unit column must be on the correct side).
The Atlas® Pro-9D two post direct drive cylinder lifts have a spring loaded Secondary Lock System (SLS)that automatically engages in the event of a slack or broken chain.
- 9,000 LB. Capacity
- Light Commercial Grade
- "Padded" Shut-Off Bar
- Asymmetric/Symmetric Arms
- Clear Floor Design
- Powder Coat Finish
- Dual Hydraulic Direct Drive Cylinders
- Single Point Lock Release
- Secondary Lock System (SLS)
- Free 8 Piece Truck Adapter Set
- Automatic Arm Restraints
- Mounting Hardware Included
- 5-year Structural Warranty, 2-year Hydraulic-Power Warranty
| Atlas® Pro-9D Specifications | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | 9,000 LB. | ||||||||||||||||||||||
| Lifting Time | Ask Your Salesperson | ||||||||||||||||||||||
| Overall Height | 144" (12') | ||||||||||||||||||||||
| Overall Width | 142 1/2" (11' 10 1/2") (With Power Unit) 133 7/8" (11' 1 7/8") (Without Power Unit) |
||||||||||||||||||||||
| Outside Column To Outside Column | 124 1/8" (10' 4 1/8") | ||||||||||||||||||||||
| Lift Height (Without Adapters) |
On Locks: 68" (5' 8") Not On Locks: 71 5/8" (5' 11 5/8") |
||||||||||||||||||||||
| Maximum Lift Height (With Adapters) |
On Locks: 74 1/2" (6' 2 1/2") Not On Locks: 77 5/8" (6' 5 5/8") |
||||||||||||||||||||||
| Padded Bar Height | 135 1/4" (11' 3 1/4") | ||||||||||||||||||||||
| Minimum Arm Height | 4 1/2" | ||||||||||||||||||||||
| Inside Column | 109 5/8" (9' 1 5/8") | ||||||||||||||||||||||
| Column Size | 7 1/4" x 11" | ||||||||||||||||||||||
| Drive Thru | 100 1/4" (8' 4 1/4") (Symmetric Arm Configuration) 92" (7' 8") (Asymmetric Arm Configuration) |
||||||||||||||||||||||
| Base of Lift | 14 ½" x 18" | ||||||||||||||||||||||
| Column Thickness of Steel | 5mm | ||||||||||||||||||||||
| Carriage Thickness of Steel | 6mm | ||||||||||||||||||||||
| Arms Thickness of Steel | 6mm | ||||||||||||||||||||||
| Cable Diameter | .375" | ||||||||||||||||||||||
| Motor/Electrical Requirement | 220V single (1) phase. A 30 amp breaker is required. |
||||||||||||||||||||||
| Oil Requirement | 3-5 Gallons AW32/AW46 | ||||||||||||||||||||||
| Requires a minimum of 4" of concrete with 3000 psi. | |||||||||||||||||||||||
| Shipping Weight | 1450 lbs. | ||||||||||||||||||||||
Warranty Information
Related Products
Atlas® 9KOH Overhead 9,000 lbs. Capacity 2 Post Lift (2 height settings: 11' 6" or 11' 10")
ATLAS
Atlas® Platinum PVL-15 ALI Certified Overhead 15,000 lbs. Capacity 2 Post Above Ground Car Lift
ATLAS
