ATLAS
Atlas® 409-HP Premium 9,000 Lbs. Capacity Portable 4 Post Lift (EXTRA TALL, EXTRA WIDE)
- SKU:
- ATPK-409HP
- UPC:
- ATPK-409HP
- Availability:
- FACTORY SHIPPED
Description
Atlas® 409-HP Premium 9,000 Lbs. Capacity Portable 4 Post Lift
(EXTRA TALL, EXTRA WIDE)
Click here for Optional Bridge Jacks
The Atlas® 409-HP is a light commercial grade portable four post lift built for the small body shop, farm shop, restoration shop or the discerning Mr. Homeowner who needs the extra height and width. The 409-HP incorporates tall columns and a long hydraulic cylinder that allow the runways to be raised 76 inches (under runway) in the highest lock position. This extra lifting height allows most SUVs and pickup trucks to be parked underneath the vehicle stored on top and the extra runway width between the columns easily accommodates one ton dual wheel trucks.
The Atlas® 409-HP is built to the same commercial lift standards as our Atlas® 412 and Atlas® 414 four post lifts, but also offers portability (Caster Kit sold separately).
The Atlas® 409-HP is designed to be a free standing four post lift and is not required to be bolted to the concrete floor. If you are going to be raising and lowering several vehicles each day, we recommend that the lift be anchored.
- 9,000 lb. Capacity
- Single point lock release
- Lock Ladder Design
- Double Lock Safety System
- All columns incorporate two special bends which help to increase the column strength.
- Larger column size
- Higher quality powder coating (steel gray color) that compliments any garage color scheme.
- Hidden cables in cross tubes
- Commercial grade wear blocks
- The mount column can be set up in any one of the four corners
- There is a wider access area between the runways than many other hobby lifts.
- Shipping Weight: 2,230 LB.
Atlas® 409-HP Specifications | |||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | 9,000 LB | ||||||||||||||||||||||
Lifting Height To Top Of Runway | 81 1/2" (6' 9 1/2") | ||||||||||||||||||||||
Clearance Under Runways | 76" (6' 4") | ||||||||||||||||||||||
Height of Columns | 94 3/4" (7' 10 3/4") | ||||||||||||||||||||||
Overall Width (Without Motor) | 123 3/4" (10' 3 3/4") | ||||||||||||||||||||||
Overall Width (With Motor) | 134 1/4" (11' 2 1/4") | ||||||||||||||||||||||
Overall Length with Approach Ramps | 231 3/4" (19' 3 3/4") | ||||||||||||||||||||||
Overall Length without Approach Ramps | 196 3/4" (16' 4 3/4") | ||||||||||||||||||||||
Approach Ramps | 37" (3' 1") | ||||||||||||||||||||||
Runway Width | 21 3/4" (1' 9 3/4") | ||||||||||||||||||||||
Runway Length | 190" (15' 10 ") | ||||||||||||||||||||||
Runway Thickness | 5 1/2" | ||||||||||||||||||||||
Width Between Runways | 42 1/4" (3' 6 1/4") | ||||||||||||||||||||||
Width Between Runway Rails | 38 3/4" (3' 2 3/4") | ||||||||||||||||||||||
Outside Runway to Outside Runway | 82 1/4" (6' 10 1/4") | ||||||||||||||||||||||
Size of Column | 7" x 4 7/8" | ||||||||||||||||||||||
Clearance Between Columns | 112 1/2" (9' 4 1/2") | ||||||||||||||||||||||
Length Between Columns | 179 3/4" (14' 11 3/4") | ||||||||||||||||||||||
Base of Column | 10 1/4" x 12 7/8" | ||||||||||||||||||||||
Maximum Wheel Base | 178" (14' 10") | ||||||||||||||||||||||
Drive Thru (Outside of tire to outside of tire) | 98" (8' 2") | ||||||||||||||||||||||
Cable Diameter | .515" | ||||||||||||||||||||||
Column Thickness of Steel | 3.5 mm | ||||||||||||||||||||||
Platform Thickness of Steel | 5 mm | ||||||||||||||||||||||
Cross Beam Thickness of Steel | 5 mm | ||||||||||||||||||||||
Motor | 1.5HP 110V 1Phase 60Hz | ||||||||||||||||||||||
Oil Requirement | 3-5 Gallons AW32/AW46 | ||||||||||||||||||||||
Shipping Weight | 2,230 LB. |
Locking Positions Under Runway (+/ - 2") |
Locking Positions Top Of Runway (+/ - 2") |
17" | 22 ¼" |
21" | 26 ¼" |
25" | 30 ¼" |
29" | 34 ¼" |
33" | 38 ¼" |
37" | 42 ¼" |
41" | 46 ¼" |
45" | 50 ¼" |
49" | 54 ¼" |
53" | 58 ¼" |
57" | 62 ¼" |
60" | 66 ¼" |
64" | 70 ¼" |
68" | 74 ½" |
72" | 78 ½" |
76" | 81 ½" |