AUTO VISION
Star-Track Auto-Vision Computerized Measuring & Four Wheel Alignment System
- SKU:
- AutoVision 121F3000
- 121F3000
- Availability:
- FACTORY SHIPPED
- Shipping:
- Free Shipping
Description
Electronic 3-D Measuring And 4 Wheel Alignment System
Price includes shipping, installation, and 3 day training
Computerized Auto Body Measuring 4-Wheel Alignment System
- Measuring from Underbody to Underhood is fast.
- Compare Point Mode
- Data Point Mode
- Point to Point Trandimensions
- Wheel Alignment: Four-wheel alignments are easily done using the Auto-Vision.
- Camber, toe angles and caster are all determined by measuring off the wheels and SAI angle is determined by measuring upper and lower ball joints.
- Key Feature: Auto Reset Function- If the vehicle moves during a repair it can be easily relocated by simply pressing the auto reset key on the handheld unit and remeasuring the 2 reference points stored during the set-up.
Electronic 3-D Measuring And 4 Wheel Alignment System
• Cabinet and Computer
• Measuring towers
• Rails
• Wheel alignment
• Reports
• Measuring toe angle
Cabinet and Computer
The cabinet can be Located anywhere convenient, as it doesn’t need to be close to the actual work area as the Measuring tower has it own “PDS” (personal display system).
Measuring towers
There is a measuring tower on each side of the vehicle. Each measuring tower has its own handheld and measuring arm that can be extended or retracted.
Rails
A measuring rail is mounted on each side of the rack for the measuring towers to roll on.
Wheel alignment
Wheel alignment is very easy to do . . . simply press the alignment button on the handheld and follow the instructions on the display screen.
Reports
Reports can be done before, during and after the repairs along with before and after wheel alignment.
Measuring toe angle
Measuring toe is done by measuring the rear of the wheel then the front of the wheel…
Measuring camber angle
Measuring camber angle is done by measuring the bottom of the wheel, then the Top of the wheel.
Measuring caster angle…
Caster angle is done by turning the front wheel inward 10 degrees and measuring the camber angle. Then turn the wheel outward 10 degrees and measure the camber angle. The computer will do the calculating and display the caster angle.
Do it right the first time
with the Auto-Vision system!
Auto-Vision Measuring Plus Four Wheel Alignment: 121F3000
TOTAL BODY COMPUTERIZED MEASURING & 4 WHEEL ALIGNMENT SYSTEM
In one set up measure the following…
Under Body * Upper Body * Inner Body * Suspension Parts * Wheel Alignment
Measures in Real Time! Fast set up, easy to use & fits most frame racks.
Data Mode with Mitchell Data
Compare Mode – compares undamaged side to repair damaged side on vehicles where data is not available.
Point to Point – measure 5 tram readings at once.
Wheel Alignment – camber, caster, toe, total toe, thrust angle and bent suspension parts.
Delivery, installation, training extra. Product of Star-Track Systems, Inc.
Related Products
Aston® Truck Wheel Alignment Machine AWA-CCD7
Aston Technologies, Inc.
Manatec FOX-3D-AUTOBOOMX-SMART-MOBILE - Portable 3D Wheel Alignment Machine for Lift Applications
MANATEC USA
Manatec FOX-3D-AUTOBOOM X - 3D Wheel Alignment Machine for Lift Applications
MANATEC USA
Manatec FOX-3D-AUTOBOOM-XC - Portable 3D Wheel Alignment Machine for Lift Applications
MANATEC USA
Triumph NOS9000 CAR LIFT FOUR POST AUTO PARKING LIFT
TRIUMPH Equipment