Loading... Please wait...

Categories

BendPak HD-9AE Alignment Lift 9000LB

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
BendPak
RRP: $4,795.00
$4,010.00 (You save $785.00)
SKU:
5175820
Weight:
4,865.00 LBS
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description


bendpak-authorized-dealer.gif
BendPak HD-9AE 9,000 LB  4-Post Alignment Lift
The HD-9AE four‐post alignment lift provides 9,000-lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points


*9,000-pound lifting capacity 
*127" Wide
*Lenght 224"
*Height of Colums 88"
*Lenght of Run Ways 188"
*Lifting Time 60 sec.
*Rise 70" 
*Motor 220 VAC/1 Ph

 

 pdf.catalog.jpg  pdf.instructions.jpg   

  • Description

    The HD-9AE four-post car lifting and alignment system features adjustable multi-position leveling, integrated front radius plates and rear slip plates, making it compatible with all leading alignment instrumentation including 3D and camera wheel alignment systems.

    • Multi-caster slip plates in the back and radius plates up front allow for extremely precise, free-floating alignment.
    • Dual radius plate positions for better vehicle accommodation.
    • Heavy-duty stainless-steel lifting cables provide a great balance of strength, abrasion resistance and fatigue.
    • Dual-hub cable sheaves reduce stress, fatigue and wear.
    • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
    • The HD-9AE features a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements.
    • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
    • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.
    • Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
    • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.
      Leak proof cylinder technology only available for BendPak four-post lifts
    • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.
    • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. ­­
    • Features multiple adjustable height locking positions for variable-height parking and infinite leveling.
    • A maintenance-free electric hydraulic power system assures ultimate dependability.
    • All operator controls are conveniently located within easy reach.
    • Non-skid runways provides maximum grip, even when the runway surface is wet or oily.

     

    Optional 4,500 lb. capacity rolling jacks (model RJ-45) make a great addition to increase service capacity. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

     

    *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

    • 9,000-lb. maximum lifting capacity
    • Multi-caster slip plates
    • Dual radius plate positions
    • heavy-duty stainless steel lifting cables
    • Dual-hub cable sheaves
    • Grease nipples on every sheave and sheave axle
    • Single hydraulic cylinder
    • Integrated hydraulic flow restrictor
    • Durable powser coat finish
    • Spring-loaded safety locks
    • Simple push-button lock release
    • Aircraft-quality stainless steel and aluminum pneumatic cylinders
    • Secondary lock system
    • Fully enclosed cables, airlines, safety latches and sheaves
    • Multiple adjustable height locking positions
    • Maintenance-free power system
    • Easy-to-reach operator controls
    • Non-skid runways
How to choose the right car lift for you

Safe balancing for BendPak car lifts

BendPak's Top 10 Car Lift Buyers Guide
  • Overall width: 127" / 3,226 mm
  • Outside length: 198" / 5,029 mm
  • Overall length: 224" / 5,690 mm
  • Height of columns: 88" / 2,235 mm
  • Runway min height: 6-1/2" / 165 mm
  • Max rise: 70" / 1,778 mm
  • Max lifting height: 76-1/2" / 1,943 mm
  • Width between posts: 117" / 2,972 mm
  • Runway width: 19" / 483 mm
  • Width between runways: 40" / 1,016
  • Length of runways: 188" / 4,775 mm
  • Min. wheelbase @ rated capacity: 135" / 3,429 mm
  • Min. wheelbase @ 75% capacity: 115" / 2,921 mm
  • Min. wheelbase @ 50% capacity: 95" / 2,413 mm
  • Min. wheelbase @ 25% capacity: 80" / 2,032 mm
  • Locking positions: 12
  • Lock spacing: every 4" / 102 mm
  • Lifting time: 60 sec
  • Motor: 220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HD-9AE Alignment Lift 9000LB to your wish list.