Loading... Please wait...

Categories

BendPak PL-14000 Tri Level Platform Assembly

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
BendPak
RRP: $16,350.00
$13,680.00 (You save $2,670.00)
SKU:
5175440
Weight:
30,000.00 LBS
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak PL-14000 14,000 LB  Tri Level Platform Assembly
The PL‐14000 by BendPak is a 4‐post parking lift designed for indoor or outdoor operation and is the most cost effective way to triple the capacity of typical parking areas. The 3‐stacker PL‐14000 is the ultimate space saver allowing three vehicles to be stacked in a single parking space.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

PL-14000 Triple Stacker Parking Lift Platforms  auto stacker parking car liftPL-14000 Triple Stacker Parking Lift Customer Photos  auto stacker parking car lift

*14,000-pound lifting capacity 
*Overall Width 114"
*Overall Lenght 193"
*Platform Widht 95"
*Platform Lenght 155"
*Overall Height 280"
  viewbrochureblue.jpg   dowbloadmanualblue.jpg  

 

The PL-14000 by BendPak is a 4-post parking lift designed for both indoor or outdoor lifting and parking operations. The PL-14000 parking lift is engineered to be the most cost effective way to triple the capacity of a typical parking area. With is triple stacker design, the PL-14000 is the ultimate space saver allowing three vehicles to be stacked in a single parking space. Shared, ganged columns increase value by reducing the number of components required for multi-unit installations. Each triple stacker parking lift uses a specially designed base frame that distributes the load making these unique lifting systems suitable for installation on virtually any residential or commercial concrete floor.

 

The PL-14000 parking lift by BendPak can accommodate both cars and SUVs and may be configured as a stand-alone parking lift or combined into rows of multiple units. When installed in rows of multiple units, the lifts share columns dramatically increasing space efficiency. The rugged-built frame utilizes a dependable hydraulic and cable-based lifting system for ultimate efficiency and safe operation.

Each stacking parking lift system incorporates many distinctive features such as a full-width platform to keep bottom vehicles protected, single hydraulic lifting cylinder combined with heavy-duty steel lifting cable, automatic safety locks and reliable, ergonomic hydraulic power unit.
Leak proof cylinder technology only available for BendPak four-post lifts

These state-of-the-art lifting systems are well suited for commercial parking environments and are powered by independent electric-hydraulic pump units or a multi-unit power station pump system that can operate up to 10 lifts depending on the configuration, layout, and other technical factors. They can be configured for 208-230-volt, 380-volt or 440-volt operation with International voltages also available. Multi-unit pump systems require their own dedicated 3-phase power circuit.

At BendPak, we believe in creating solutions that simplify your life. Our history of manufacturing excellence began more than 45 years ago and we continue to design and manufacture innovative car parking lift solutions with features and operating characteristics that meet customer requirements for quality, reliability, safety, and value. 

    • 7,000 lb. capacity per deck / 14,000 lb. capacity total
    • Perfect for cars, light trucks, motorcycles and ATV’s
    • Rugged I-beam and C-channel construction
    • Built-in wheel stops
    • Wide base-plate for maximum stability
    • Front and rear wheel chocks
    • Two-position fail safe locking system
    • Superstructure features durable powder-coat finish
    • Platforms hot dip galvanized per ASTM standards
    • Single hydraulic cylinder with heavy-duty steel lifting cable
    • Heavy-duty steel construction
    • Reliable electric-hydraulic power system
    • Full-width platform to keep bottom vehicles protected
    • Simple controls


How to choose the right car lift for you 

Safe balancing for BendPak car lifts

BendPak's Top 10 Car Lift Buyers Guide


  • Lifting capacity: 14,000 lbs. / 6,350 kg
  • Overall length: 193" / 4,911 mm
  • Platform length: 155" / 3,928 mm
  • Overall width: 114" / 2,896 mm
  • Platform width: 95" / 2,403 mm
  • Overall height: 280" / 7,120 mm
  • Voltages: 208-230-volt, 380-volt or 440-volt

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak viacontact@bendpak.com.

 Product Videos

Huge Parking Lift - Triple Stacker PL-14000 by BendPak
  • Huge Parking Lift - Triple Stacker PL-14000 by BendPak
    More info on this great parking lift: http://bit.ly/SiAeXiBend...

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak PL-14000 Tri Level Platform Assembly to your wish list.