Loading... Please wait...

Categories

BendPak HDS-40X Extended 4-Post Lift 40000LB Cap.

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
BendPak
RRP: $23,730.00
$20,435.00 (You save $3,295.00)
SKU:
5175178
Weight:
8,234.00 LBS
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description

 
new-bendpak-logo-2016.jpg
BendPak 4-Post Lift HDS-40X  Extended Lenght 40,000 LB Capacity  Heavy Duty Truck Lift
 BendPak's newest line of heavy-duty four-post truck lifts are here. Bigger sheaves, beefier components and a legacy of dependability--get your hands on these massive machines and bring a higher level of service to your garage or shop.

 Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points


*40,000-pound lifting capacity 
*Overall 154" Wide
*Overall Lenght 357"
*Height of Colums 93"
*Lenght of Run Ways 323"
*Max Rise 60"
*Lifting Time 75 sec.
*Motor 220 VAC/1 Ph

 

pdf.catalog.jpg    pdf.instructions.jpg  ali-etl-logo.jpg

                     

Description

BendPak's HDS-Truck Series four-post lifts are a whole new breed of rugged. They're newly engineered super-duty truck lifts that make light work out of heavy lifting. They work better, are built to last, and feature upgrades that increase safety, durability and productivity. Four models provide a generous 35,000 or 40,000-lb. lifting capacity and feature extra-wide runways to accommodate a wide vareity of vehicle configurations.

All HDS-40X standard length truck lifts feature:

  • Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.
    • Supersized 12” diameter cable sheaves within the runway and cross tubes combined with massive 4” diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll increase safety and spend less money in service related expenses down the road.

 

    • BendPak's HDS-Truck Series lifts feature four stainless-steel lifting cables that provide a great balance between abrasion resistance and fatigue.

 

    • Grease nipples are located on every sheave and sheave axle to make lubrication maintenance a breeze.
    • Each HDS-Truck Series four-post lift is equipped with a single hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The hydraulic cylinder features high-durometer rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service. Leak proof cylinder technology only available for BendPak four-post lifts

 

    • An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.
    • A durable powder coat finish can withstand harsh environments and chemical spills and will provide years of protection.

 

    • A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

 

    • A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.

 

    • Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure.

 

    • Features multiple adjustable height locking positions for variable-height parking and infinite leveling.

 

    • A maintenance-free electric hydraulic power system assures ultimate dependability.

 

    • All operator controls are conveniently located within easy reach.

 

    • 12" x 12" base plates provide a solid foundation.

 

  • Non-skid runways provides maximum grip, even when the runway surface is wet or oily.
  • Optional rolling jacks make a great addition to increase service capacity. Rolling jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and break service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump.

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak via contact@bendpak.com.

hds-40x.png     hds-427-40.png

    • 40,000-lb. lifting capacity
    • Supersized 12" diameter cable sheaves
    • Stainless steal lifting cables
    • Extended length runways
    • Grease nipples
    • Single hydraulic under-runway cylinder
    • Integrated flow restrictor
    • Durable powder coat
    • Spring-loaded safety locks
    • Second lock system on constant guard
    • Fully enclosed lifting cables
    • Multiple adjustable height locking positions
    • Maintenance-free electric hydraulic power system
    • Conveniently positioned operator controls
    • 12" x 12" base plates
    • Non-skid runways
    • Optional rolling jacks

Best Warranty Car Lifts - BendPak

Safe balancing for BendPak car lifts

How to choose the right car lift for you

BendPak's Top 10 Car Lift Buyers Guide
  • Lifting capacity*: 40,000 lbs. / 18,144 kg
    • *Max capacity / front axle: 20,000 lbs. / 9,072 kg
    • *Max capacity / rear axle: 20,000 lbs. / 9,072 kg
  • Overall width: 154" / 3,912 mm
  • Outside length: 317" / 8,052 mm
  • Overall length: 357" / 9,068 mm
  • Height of columns: 93" / 2,362 mm
  • Runway min height: 8-1/2" / 216 mm
  • Max rise: 60" / 1,524 mm
  • Max lifting height: 68-1/2" / 1,740 mm
  • Width between posts: 134" / 3,404 mm
  • Runway width: 28" / 711 mm
  • Width between runways: 36" – 47" / 914 mm – 1,194 mm
  • Runway centerline: 64" - 75" / 1,625 mm to 1,905 mm
  • Outside edge of runways: 92" - 103" / 2,367 mm - 2,616 mm
  • Drive-thru clearance: 109" / 2,769 mm
  • Length of runways: 323" / 8,204 mm
  • Min wheelbase @ rated capacity: 230" / 5,842 mm
  • Min wheelbase @ 75% capacity: 195" / 4,953 mm
  • Min wheelbase @ 50% capacity: 165" / 4,191 mm
  • Min wheelbase @ 25% capacity: 130" / 3,302 mm
  • Locking positions: 9
  • Lock spacing: every 6" / 152 mm
  • Lifting time: 75 sec
  • Motor: 220 VAC / 60 Hz / 1 Ph

 

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HDS-40X Extended 4-Post Lift 40000LB Cap. to your wish list.