Loading... Please wait...

Categories

DannMar D-7 Kit Four-Post Storage Garage Lift Complete Kit

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
  • Image 16
  • Image 17
  • Image 18
  • Image 19
DannMar
RRP: $3,350.00
$2,760.00 (You save $590.00)
SKU:
1375640
Weight:
1,635.00 LBS
Shipping:
Free Shipping

Choose Your Options

Commercial delivery, I have a Fork Lift.:
Residential delivery, I have a Fork Lift. :
Please call me to make delivery arrangements.:
Please drop off lift at local freight terminal.:

 Product Description

dannmar-equipment-logo.jpg

Quick Overview

From valet parking to towing, storage and impound yards, to home owners, the D-7 is the premiere four-post lift choice. If you're looking for a four-post lift with the same capacity but a bit wider, check out the D-7/X.

pdf.catalog.jpg pdf.instructions.jpg

com.7.dimensions.jpg

 

Details

The D-7 Four-Post Lift is one of the most popular in the Dannmar line. The reason is quite simple; it fits perfectly in a home garage or shop. It's typically used for parking or storage because it provides the ability to stack two cars in one spot. This auto lift has also gained a solid reputation with hobbyist and car collectors, as well as the DIY aftermarket. From valet parking to towing, storage and impound yards, to home owners, the D-7 is the premiere four-post lift choice. If you're looking for a four-post lift with the same capacity but a bit wider, check out the D-7/X.

Product Features

 

Simple controls for easy operation Spring loaded safety locks on each column Self-lubricating UHMW polyethylene internal slide blocks Single safety lock release handle Single hydraulic cylinder underneath runway Reliable electric/hydraulic power system Detachable drive-up ramps Free standing design Self-lubricating bearings and cable sleeves Runways include rail-kit for optional accessories

Tech Specs

 

Weight: 1493 lbs. Lifting Capacity: 7,000 lbs. / 3182 kg.
Overall Width: 105" / 2667 mm.
Outside Length: 170-1/2" / 4331 mm.
Overall Length: 203-1/2" / 5169 mm.
Height Columns: 82" / 2083 mm.
Minimum Runway Height: 4-1/2" / 114 mm.
Maximum Rise: 68" / 1791 mm.
Maximum Lifting Height: 72.5" / 1841.5 mm.
Width Between Columns: 92-1/2" / 2350 mm.
Runway Width: 18-1/2" / 470 mm.
Width Between Runways: 37-1/2" / 953 mm.
Length of Runways: 160-1/2" / 4077 mm.
Locking Positions: 10
Lock Spacing: Every 4-1/2"
Lifting Time: 45 Seconds
Standard Motor: 110 VAC 60Hz. 1Ph Hydraulic Oil Capacity/Type: 10 qts. 10 wt hydraulic fluid

Dannmar D-7 Four Post Car Lift w/Kit 
Formerly Commander 7000 w/ Kit

ali-etl-logo.jpg

The D-7 (formerly Commander 7000) Four-Post Lift is one of the most popular in the Dannmar line. The reason is quite simple; it fits perfectly in a home garage or shop. It's typically used for parking or storage because it provides the ability to stack two cars in one spot. This auto lift has also gained a solid reputation with hobbyist and car collectors, as well as the DIY aftermarket.

From valet parking to towing, storage and impound yards, to home owners, the D-7 is the premiere four-post lift choice. If you're looking for a four-post lift with the same capacity but a bit wider, check out the D-7/X w/Kit(formerly Commander 7000X)

non-slip-grip.jpg

Tru™ Non-Skid Runway Grip
This special process of coating every one of our new line of lifts in a very unique sandpaperfinish, is applied to the runways and the ramps. It makes even the greasiest of situations into a real gripping experience.

 
usa-made-power-unit.jpg

USA Made Power Unit
Why is Dannmar 1 step ahead of the competition? Our power units are completely made in the USA. Meaning they're built to the quality standards you've come to expect from Dannmar.

 

heavy-duty-cables.jpg

Aircraft-Quality Heavy-Duty Steel Cables
These heavy-duty cables are made to carry the weight of the entire lift, and the load it carries.This is not your typical tire-swing rope.

 

heavy-duty-locks.jpg

Heavy Duty Visible Locking System
Built to outlast the lift itself, the dual-locking system, visible from the outside, is just another step in lifting safety. Each notch combinatively is designed to carry far past the rated load capacity.

 

heavy-duty-top-plate-assembly.jpg

Cable Connector
This assembly attaches the cable to the top plate of the post. This anchors the plate to the top of the post, with the cable, all protected by thick steel. Tieing the whole lift together, we're proud to say this, among everything else in the lift, was paid careful attention to detail.

 
solid-deck.jpg

Solid Deck
This optional two-piece, full-length middle deck platform fits all Commander Series lifts providing additional storage space. Lightweight aluminum construction makes removal and installation easy.

 
aluminum-ramps.jpg
Aluminum Ramps

These optional low-profile lightweight aluminum ramps feature quick-mount brackets to make ramp removal and installation a cinch. Features an attractive diamond-plate finish that provides a non-slip surface. 16-lbs. each.

 

Caster Kit, 3 Drip Trays, and EZ-Slide™ Jack Platform Included:

 
jack-platform.jpg

EZ-Slide™ Jack Platform
This optional 3,500-lb. capacity sliding jack platform is perfect for elevating your vehicle off the runways for easy brake and wheel service capability. The EZ-slide™ design allows the jack platform to be positioned anywhere under the vehicle. Bottle jacks NOT included.

 
caster-kit.jpg

Caster Kit
Make your Dannmar Commander lifts mobile with this optional four-post lift caster kit. These sturdy built steel units with 6 in. polyurethane casters allow you to move it, store it, or take it outside; make your Commander more versatile with caster kits from Dannmar.

 
drip-trays.jpg

Set of 3 Drip Trays
These optional, affordable, impact-resistant polypropylene drip trays are sold in packs of three. Each tray comes with 56 articulated catches and gutters to restrain fluid within individual compartments.

 Features
  • Simple controls for easy operation
  • Spring loaded safety locks on each column
  • Self-lubricating UHMW polyethylene internal slide blocks
  • Single safety lock release handle
  • Single hydraulic cylinder underneath runway
  • Reliable electric/hydraulic power system
  • Detachable drive-up ramps
  • Free standing design
  • Self-lubricating bearings and cable sleeves
  • Runways include rail-kit for optional accessories

Includes

  • Free 3 Year Warranty

Formerly know as Commander 7000 Kit

 

 

 
 
Specifications D-7
Lifting capacity 7,000 lbs. / 3182 kg
Overall Width 105" / 2667 mm
Outside Length 170-1/2" / 4331 mm
Overall Length 203-1/2" / 5169 mm
Height Columns 82" / 2083 mm
Minimum Runway Height 4-1/2" / 114 mm
Maximum Rise 68" / 1791 mm
Maximum Lifting Height 72.5" / 1841 mm
Width Between Columns 92-1/2" / 2350 mm
Runway Width 18-1/2" / 470 mm
Width Between Runways 37-1/2" / 953 mm
Length of Runways 160-1/2" / 4077 mm
Locking Positions 10
Lock Spacing Every 4-1/2"
Lifting Time 45 Seconds
Motor 110 VAC 60Hz. 1Ph

 

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the DannMar D-7 Kit Four-Post Storage Garage Lift Complete Kit to your wish list.