Loading... Please wait...

Categories

Ammco 4000B Combination Brake Lathe

Hover over image to zoom

  • Image 1
Ammco
RRP: $9,500.00
$8,299.00 (You save $1,201.00)
SKU:
AMM-4000B
Shipping:
Free Shipping

 Product Description

ammco.jpg

Choose a Bench Lathe Adapter Kit 

Required w/Brake Lathe*:
 900001 Adapter Kit "A"
[Add $1001] more info....
 900002 Adapter Kit "B"
[Add $1,090] more info....
 900003 Adapter Kit "C"
[Add $1995] more info....
 900006 Adapter Kit "E"
[Add $1,697] more info....
 900007 Adapter Kit "F"
[Add $2,315] more info....
Optional Brake Lathe Accessories 

Optional # 2500:
   2500 Bench Kit
[Add $675.00] more info....

 

Ammco 4000B Combination Brake Lathe

 

Ammco 4000B Brake Lathe Combination Disc and Drum

Combination Lathe for Brake Drums and Rotors, Less Adapters, 110V, 60Hz (Must be Purchased with a Bench Lathe Adapter Kit)

The AMMCO® Model 4000B Combination Disc and Drum Brake Lathe has been professionals' first choice for more than 50 years.

And for good reason. It's simple. It's fast. It's very precise. AMMCO combination brake lathes support rotors or drums using a standard one inch arbor. And like all AMMCO brake lathes, it almost never breaks down. It's no wonder that the 4000B has been a favorite of brake technicians everywhere since its introduction five decades ago.

 
 
   
Features
  • Two adjustable spindle speeds (if desired) allow for fast turning of small pieces and high-quality turning of larger pieces.
  • Two feed rates allow for quick rough-cut and finer finish-cut settings.
  • Forged alloy steel arbor – Two tapered mounting surfaces add stability and handle up to 200 pounds.
  • Feed slide protection keeps travel surfaces free of dirt and chips.
  • Negative rake tool bits standard, provide lower cost of ownership.
  • Solid twin cutter tool simultaneously resurfaces both sides of rotor.
  • Full-drum support hex boring bar guarantees correct tool angle for drums.
  • Infinitely variable drum feed from 0.002 inches to 0.02 inches per revolution.
  • Quick drum-to-rotor changeover.
  • User-friendly ergonomics.
  • Supports drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor.
  • Micrometer-precise depth-of-cut dials embossed in metal and calibrated in both thousandths of an inch and tenths of a millimeter; easy reset to zero.
  • Extended spindle increases drum capacity to 9.875 inches.
  • Support drums or rotors up to 100 pounds using the standard 1-inch (25.4 mm) arbor, or up to 200 pounds using the optional 1.875-inch (47.63 mm) arbor
   

 

 
Specifications 4000B
Volume High
Application Car & Light Truck
Rotors Yes
Drums Yes
Max Rotor Diameter 14.5"
Max Rotor Face Width 3-3/4"
Standard Max Arbor Capacity 100 lbs.
Heavy Duty Max Arbor Capacity 200 lbs
Max Rotor Thickness 1.875"
Flywheel Service Capable Yes
Spindle Bearings Bronze Sleeve
Motor 1 HP
Tool Bits (shipped with) Negative Rage
Double Taper Arbor Yes
Spindle Speed 100,200 RPM
Drum Feed Rate .002" to .020"/REV
Max Drum Depth 6.875"
Rotor Feed Rate .002"/.010"/REV
Weight (lbs) 406 lbs.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Ammco 4000B Combination Brake Lathe to your wish list.