null
BendPak

BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.

Write a Review
SKU:
5175410
UPC:
5175410
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
  • BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Cap.
$15,605.00
$15,195.00
— You save $410.00

Description

 
bendpak-authorized-dealer.gif
BendPak XPR-15CL-192 Extra Tall, 15,000 Lb. Capacity, Clearfloor, Standard Arms
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-15CL-192, for instance, has an astounding 15,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before. Like all our clearfloor lifts, this lift offers superior direct-drive performance, cutting-edge technology, top of the line materials and design that's ahead of its time. Fits in shops with ceilings higher than 14', and it won't crowd your floor while you work beneath a vehicle.

 

adapter-set-e-blast.jpg

Others might charge extra for these necessary adapters, but they're standard with every XPR-Series heavy-duty model.

  • Lifting capacity:15,000 lbs.
    Overall height:192"
    Overall width:155"Min pad height:6"
    Rise:69"Motor:220 VAC / 1 Ph
    Rise time:45 sec.
    Shipping weight:3,750 lbs.

 

  •  pdf.instructions.jpg   pdf.catalog.jpg      warranty-5-2-1-.-2.jpgali-etl-logo.jpg             

 

Two-Post Lifts by BendPak

XPR-15CL-192 (Extra Tall)

 

SKU# 5175410

 

15,000-LB. CAPACITY / TWO-POST LIFT / CLEARFLOOR / STANDARD ARMS

 


 

The XPR-15CL two-post car lift raises the bar (or should we say car) in terms of extreme lifting power, quality and value. 15,000 lbs. is a whole lot of lifting power. Not only does this lift let you operate on low-profile cars, it has the ability to lift some extremely heavy trucks and vans. 15,000 lbs. is enough to lift a dump truck, so you’re covered on most lifting applications.

 

15cl.png

 

CAPACITY

Lifting Capacity*15,000 lbs. (6,804 kg)
*Max Capacity / Front Axle7,500 lbs. (3,402 kg)
*Max Capacity / Rear Axle7,500 lbs. (3,402 kg)

RISE

A - Rise:69" (1,753 mm)
B - Rise + Pad Only:74" (1,880 mm)
C - Rise + Pad + 63 mm Adapter:80" (2,032 mm)
D - Min. Height + Pad:5" (127 mm)
Time to Full Rise:45 seconds

OUTSIDE DIMENSIONS

E - Height Overall:170" (4,318 mm)
F - Width Overall:155" (3,937 mm)
G - Outside Columns:144" (3,658 mm)

INSIDE DIMENSIONS

H - Inside Columns:120" (3,048 mm)
I - Drive-Thru Clearance:106" (2,692 mm)
J - Floor To Overhead Switch:165" (4,191 mm)

ARMS & PADS

K - Front Arm Reach: (MIN)60" (1,524 mm)
K - Front Arm Reach: (MAX)39" (991 mm)
L - Rear Arm Reach: (MIN)60" (1,524 mm)
L - Rear Arm Reach: (MAX)39" (991 mm)
Max Load Per Arm3,750 lbs. (1,701 kg)

POWER UNIT

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

 

 

EXTREME LIFTING POWER IN OUR CLASSIC TWO-POST LIFT DESIGN

With lift columns placed farther apart to accommodate wide truck mirrors, even full-size pickups are a cinch to lift. If this is the last lift you ever purchase, you’re going to have it with you for a long, long time.

With a BendPak car lift, expect incredibly fast rise and descent speeds, as well as the ability to open doors without banging them against the lift columns. The XPR-15CL comes with the same safety features as our other XPR series lifts. Easy-to-use, friendly interfaces come with the best customer service and installation teams in the business. From the breezy ordering process to delivery and installation, BendPak makes getting a powerful lift that fits in your garage a hassle-free experience.

CLEARFLOOR CONVENIENCE

Designed to allow users the freedom to move freely underneath the lift, this model features our Clearfloor design. The hydraulic lines run overhead, safely tucked inside the top crossbeam.

DUAL DIRECT-DRIVE TECHNOLOGY

By utilizing two low-pressure HVLP direct-drive cylinders, we've eliminated the need for lifting chains or screw mechanisms commonly found on other lift designs. HVLP direct-drive technology offers better reliability, smoother operation and less maintenance. High-volume and low-pressure equates to less workload placed on the entire hydraulic system.

INDUSTRIAL-GRADE HYDRAULIC CYLINDERS

BendPak hydraulic cylinders are made from pilot-fitted, machined steel pistons wrapped with specially designed, pressure-loaded U-cup piston seals, backups and wear bands that do not allow fluid to bypass back across the tubing. The rod is composed of C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically. Our high-durometer, mechanically loaded rod seals prevent rods from leaking, and a urethane rod wiper provides exclusion protection. The cylinder body is welded from high-grade steel and meets/exceeds ASTM specifications.

SUPER-DUTY TELESCOPING ARMS

If you’re looking at the XPR-15CL, we know you might be servicing some extremely heavy equipment: garbage trucks, large fleet vans, small buses and more. The telescoping arms on this two-post lift have you covered to safely lift up to 15,000 lbs.

LOW-PROFILE, DROPPED-END FRAME CONTACT PADS

Sports cars and low-profile compact vehicles are no problem for the XPR-15CL. If we raised the lift capacity but lost the ability to service more commonly used vehicles, we’d really be doing ourselves (and you) a disservice. BendPak’s heavy-duty lifts expand your lifting potential; we don’t simply swap light-duty capability for heavy-duty capability as you move up the chain.

16-PIECE ADAPTER SET / STANDARD

Every two-post lift comes standard with our 16-piece adapter set, so you never have to worry about lift points that are too high or too low. You’ll get eight stackable adapters, four 3” and four 6”, as well as eight cradle pads (four polyurethane pads and four cradle pads). If you’re lifting trucks or vans with running boards or auxiliary fuel tanks, the adapter set is must-have, and it comes at no extra cost to you!

LOWERED ARM TUBE SUPPORTS

Because the dimensions on the XPR-15CL are expanded to accommodate larger-type vehicles, BendPak designed the arm tube supports low enough to accommodate small vehicles. There’s no point in having a workhorse that handles heavy stuff but not lighter stuff, so we’ve made sure each type handles the same vehicles as our lighter-capacity lifts.

AUTOMATIC ARM RESTRAINTS

Heavy vehicles present an increased need for safety features. The thought of a full-size pickup or garbage truck falling on your garage floor is truly frightening. BendPak eliminates the risk by including extremely powerful auto-locking arm restraints that engage when the lift goes up and release when it descends.

TALLER LIFT CARRIAGES

By building our lifting carriages 53” high, BendPak two-post lifts are made safer, more durable and more efficient than our competition’s carriages.

MAINTENANCE-FREE LOAD BEARINGS

Durable, reliable and totally chemical-resistant, BendPak’s UHMW (ultra-high molecular weight polyethylene) load bearings last forever. No lubrication or maintenance necessary.

SINGLE-PIECE COLUMNS

Two XPR-15CL columns can hold a combined weight of 15,000 lbs. This is possible in part because of their single-piece construction, which reduces and evenly distributes the stress across the columns.

SINGLE-POINT SAFETY RELEASE

Need to stop all procedures immediately? A single-point safety release is in place for you to use at a moment’s notice.

ON THE LEVEL

A dual-synchro equalization system ensures your two-post lift rises equally no matter what.

AUTO SHUTOFF

If any vehicle touches the overhead structure, the lift automatically shuts off, even if the user continues to attempt to raise the lift.

HIGH-SPEED HYDRAULICS

With 3/8" hydraulic lines, a high-flow pump and integrated AC power-unit, this car lift is one of the fastest in the industry.

CHOOSE EXTENDED HEIGHT

The safe and rugged XPR-15CL-192 features lift columns that are longer than the standard model, so larger vehicles can be easily accommodated.

 

 

View AllClose

Warranty Information

Better Products – Better Service – Better Value For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability. Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first. » Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure » Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit » One Year (12-Months) Labor Warranty on site or at factory » One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
View AllClose

0 Reviews

View AllClose