Loading... Please wait...

Categories

BendPak PL-7000DLX 7,000-lb. Cap. / 2-Post Parking Lift / Deluxe / SPECIAL ORDER

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
BendPak
RRP: $6,675.00
$5,585.00 (You save $1,090.00)
SKU:
5175229
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak PL-7000DLX   7,000-lb. Capacity / Two-Post Parking Lift / Deluxe / SPECIAL ORDER
  The PL-7000DLX is the deluxe version of the PL-7000XR. The approach ramp is longer and wider, a galvanized diamond-plate platform replaces the powder coat on the XR, and other enhancements and modifications improve product durability and operator convenience.

Free Shipping Continental US

  pdf.catalog.jpg          pdf.instructions.jpg      5-2-1-warranty.jpg

Parking Lifts by BendPak

PL-7000DLX

SKU# 5175229

7,000-lb. Capacity / Two-Post Parking Lift / Deluxe / SPECIAL ORDER


The PL-7000DLX is the deluxe version of the PL-7000XR. The approach ramp is longer and wider, a galvanized diamond-plate platform replaces the powder coat on the XR, and other enhancements and modifications improve product durability and operator convenience.

 

PL-7000DLX Specifications

Style

Style:Two-Post Parking Lift

Capacity

Lifting Capacity:7,000 lbs. (3,175 kg)
Overall length:190" (4,405 mm)
Platform length:157.5" (4,001 mm)
Overall width:98" (2,489 mm)
Platform width:85" (2,165 mm)
Overall height:131" (3,327 mm)
Overall rise:85" (2,159 mm)
Lifting time:30 seconds
Motor:220 VAC / 60 Hz / 1 Ph

Note: An air supply (minimum: 30 psi / 3 CFM) is may be required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Features

  • 7,000-lb. lifting capacity parking lift
  • Full-width and extended approach ramp
  • Galvanized diamond plate platforms
  • Bolt-on and strengthened diamond-plate center panels
  • Lengthened and reinforced front leg lessens tension load on front anchors
  • Modified (elevated) control arm
  • Minimum footprint allows multiple installations in limited space
  • Independent lifting structures allows for staggered installation
  • Power-unit and controls integrated within lift structure
  • Freestanding design reduces tax and permit liabilities in most counties
  • Overhead power unit provides smooth quiet hydraulic operation
  • Wide-deck platform accommodates pickups, vans and cars
  • Designed for installation on typical parking surfaces
  • Durable construction for maximum stability
  • Dual hydraulic cylinders and heavy-duty lifting chain
  • Dual synchronization chains keeps the deck level under all conditions
  • Automatic safety lock
  • Maintenance-free composite carriage bearings
  • Maintenance-free self-lubricating chain rollers
  • Wide-base plate mounts directly on grade, even on asphalt
  • No special site preparation required for installation
  • Optional audible/visual descent alarm available
  • Standard integrated key-activated power on/off switch

BendPak's Upgraded Version of a Classic

For garages that want a little extra reinforcement built into the bones of their parking lift, especially in heavy-use garages and commercial environments, the deluxe PL-7000DLX is an upgrade over the ever-reliable PL-7000XR. We lengthened and widened the approach ramps; designed sturdier galvanized diamond plate platform; added bolt-on, strengthened diamond plate center panels; raised the control arm; and we lengthened and reinforced the front legs to lessen tension load on the front anchors. These upgrades result in a more durable and easier-to-use version of one of the safest and most reliable parking lifts ever made.

Minimum footprint

Two-post parking lifts are popular because they service one purpose: parking vehicles in tighter spaces. Unlike wider four-post lifts that double as parking lifts, the PL-7000DLX has all the lifting height while taking up less space in your garage. This makes them ideal for both home users and professionals who want to stack multiple lifts side-by-side without an inch of room to spare. The units can be staggered or installed in an even row.

Lengthened and reinforced front legs

The PL-7000DLX features lengthened and reinforced front legs that lessen the pull-out tension load on the front anchors. The front legs extend 19" farther than the PL-7000XR.

Galvanized diamond plate platform

The deluxe galvanized platform on the PL-7000DLX is a zinc-coated thing of beauty. The galvanization process makes the steel virtually indestructible. Neither weather nor abuse will ever mar or rust out the deck. The diamond-plate is attractive and non-skid, so it offers superior grip for vehicle tires. It's also now secured in place with fasteners. These bolt-on diamond-plate center panels work to strengthen the lift, so the deck stays reliable for many years of extremely low-maintenance service.

Full-width and extended approach ramp

The drive-on ramp has been extended 25" to accommodate low ground-clearance vehicles. The ramp is now full width to make vehicle approach easier, especially for wide vehicles and large tires.

Raised control arm

The PL-7000DLX control arm has been raised to 72" for increased drive-under clearance. The increased height also makes the controls easier to access.

Dual hydraulic cylinders

BendPak has perfected the hydraulic lift system. Dual cylinders provide an even lift, while an integrated flow divider on each cylinder controls the lift descent in the extremely unlikely event of catastrophic hose rupture.

Dual synchronization lifting chains

Heavy-duty lifting chains lift evenly and maintain a balanced platform at all times. They’re rugged, maintenance-free and self-lubricating, and they run smoothly over carriage bearings that are also durable and completely maintenance-free.

Internal design

All moving parts (e.g., cylinders, chains) are kept within the lift structure. No dirt, debris, spills or weather conditions will affect the performance of your lift, nor will you risk tangling your clothes or pinching your fingers in the moving chains. This is as much a safety concern as it is designed to provide a more attractive parking lift.

Automatic safety locks

Multiple locking levels let you decide how high or low you’re going to park, so even if you operate in a garage with a low ceiling, you can still safely stack your vehicles. The locks release upon descent.

Wide base support

The base support on the PL-7000DLX is only about the length of a car and just wide enough to provide perfect stability, but it doesn't sacrifice crucial safety features for the sake of being compact. In fact, BendPak has built its reputation on making car lifts that are extraordinarily safe and tested more rigorously than the competition.

Key-activated on /off function

Key activation puts you in complete control of your parking lift structure. This is a safety feature that's obviously convenient for operators in garages. It keeps the controls in the hands of those certified to use it. It's also great for home users. Kids, pets and foolish friends won’t raise or lower the platform just by bumping the buttons.

 

 Product Videos

BendPak PL-7000X Parking Lift: The best-in-class auto lift parking solution
  • BendPak PL-7000X Parking Lift: The best-in-class auto lift parking solution
    For more information on this parking lift: http://www.bendpak....

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak PL-7000DLX 7,000-lb. Cap. / 2-Post Parking Lift / Deluxe / SPECIAL ORDER to your wish list.