Loading... Please wait...

Categories

BendPak PL-18000 Four Level Four Post Parking Lift -Special Order

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
BendPak
RRP: $22,475.00
$18,805.00 (You save $3,670.00)
SKU:
5175460
Weight:
30,000.00 LBS
Shipping:
Free Shipping

 Product Description

bendpak-authorized-dealer.gif
BendPak PL-18000 14,000 LB  Tri Level Platform Assembly
The PL-18000 by BendPak is a 4-post parking lift designed for indoor or outdoor operation and is the most cost effective way to increase the capacity of typical parking areas. The quad-stacker PL-18000 is the ultimate space saver allowing four vehicles to be stacked in a single parking space. Shared, ganged columns increase value by reducing the number of components required for multi-unit installations. Each lift uses a specially designed base frame that distributes the load making these unique lifting systems suitable for installation on virtually any residential or commercial concrete floor.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

*18,000-pound lifting capacity 
*Overall Width 114"
*Overall Lenght 193"
*Platform Width 95"
*Platform Lenght 155"
*Overall Height 640"
  pdf.catalog.jpg   

 

PL-18000 parking lift available by special order only.

The PL-18000 can accommodate both cars and SUVs and may be configured as a stand-alone lift or combined into rows of multiple units. When installed in rows of multiple units, the lifts share columns dramatically increasing space efficiency. The rugged built design utilizes a dependable hydraulic and cable-based lifting system for ultimate efficiency and safe operation. 

Each stacking system incorporates many distinctive features such as a full-width platform to keep bottom vehicles protected, single hydraulic lifting cylinder combined with heavy-duty steel lifting cable, automatic safety locks and reliable, ergonomic hydraulic power unit.

Leak proof cylinder technology only available for BendPak four-post lifts

 

These state-of-the-art lifting systems are well suited for commercial parking environments and arepowered by independent electric-hydraulic pump units or a multi-unit power station pump system that can operate up to 10 lifts depending on the configuration, layout, and other technical factors. They can be configured for 208-230-volt, 380-volt or 440-volt operation with International voltages also available. Multi-unit pump systems require their own dedicated 3-phase power circuit.

At BendPak, we believe in creating solutions that simplify your life. Our history of manufacturing excellence began more than 45 years ago and we continue to design and manufacture innovative car parking solutions with features and operating characteristics that meet customer requirements for quality, reliability, safety, and value. 

    • 6,000 lb. capacity per deck / 18,000 lb. capacity total
    • Superstructure features durable powder-coat finish
    • Perfect for cars, light trucks, motorcycles and ATV’s
    • Platforms hot dip galvanized per ASTM standards
    • Rugged I-beam and C-channel construction
    • Single hydraulic cylinder with heavy-duty steel lifting cable
    • Built-in wheel stops
    • Heavy-duty steel construction
    • Wide base-plate for maximum stability
    • Reliable electric-hydraulic power system
    • Front and rear wheel chocks
    • Full-width platform to keep bottom vehicles protected
    • Two-position fail safe locking system
    • Simple controls


How to choose the right car lift for you 

Safe balancing for BendPak car lifts

BendPak's Top 10 Car Lift Buyers Guide


  • Lifting capacity: 18,000 lbs. / 6,350 kg
  • Overall length: 193" / 4,911 mm
  • Platform length: 155" / 3,928 mm
  • Overall width: 114" / 2,896 mm
  • Platform width: 95" / 2,403 mm
  • Overall height: 640" / 16,264 mm
  • Voltages: 208-230-volt, 380-volt or 440-volt

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak viacontact@bendpak.com.

 

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak PL-18000 Four Level Four Post Parking Lift -Special Order to your wish list.