Loading... Please wait...


BendPak MDS-6LP Mid-Rise Scissor Car Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
RRP: $3,295.00
$2,755.00 (You save $540.00)
2,318.00 LBS
Free Shipping
Expected release date is 15th May 2018

 Product Description


BendPak MDS-6LP Mid-Rise Car Lift 6,000 Lb. Capacity, Open Center
This fully open-center design, both top and bottom, makes the MDS-6LP the perfect combination of convenience and work productivity. The MDS-6LP model has approach ramps attached to the base frame lessening hindrance when working on elevated vehicles – especially in the wheel well area. The redesigned approach ramps have slotted receivers and simply drop into place. They can be easily removed by lifting upwards. 


       pdf.catalog.jpg       pdf.instructions.jpg  ali-etl-logo.jpg




BendPak’s 6,000‐pound capacity MDS‐6LP model is an open‐center mid‐rise auto‐maintenance lift for servicing passenger cars, SUV’s and light trucks. The exclusive open‐center design of the MDS‐6LP not only allows full unobstructed access to the underside of the car, but is also clear of frame cross members on the floor that are typical with other mid‐rise lifts. This fully open‐center design, both top and bottom, makes the MDS‐6KLP a clear leader in convenience and work productivity.

The MDS-6LP (replaces the MDS-6K) features wide lifting platforms combined with durable cushioned‐rubber contact block, the new MDS-6LP model has an extended lifting platform. New MDS-6LP platform length is 66”. ( MDS-6K platform length is 58”) Simply drive the vehicle over the lowered scissor ramps and position the soft and durable rubber blocks under the vehicle lifting points for fast and easy vehicle positioning and set‐up. The user‐friendly power console features simple operator controls like up, down, and safety lock buttons. A small footprint, easy installation and adaptable 110V/240V power unit makes the MDS‐6LP the perfect lift that fits any shop or home garage. MDS-6LP  model has a pivoting “kicker” mechanism that assists lifting low ground clearance vehicles. The kicker acts like booster rockets for the first six inches of upward movement. 

Scissor lifts by BendPak offer several different options for both commercial and personal use. The mid rise, portable scissor lift would be the most popular by far, as well as the most affordable. While the full rise model offers the most capabilities, and complete access to the car undercarriage. We even offer a full rise scissor alignment rack that is truly state of the art and so advanced that it must be seen be fully appreciated.

NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick‐up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height with the specifications shown before you purchase.



Features & Specs

• Each lift platform features four solid steel-scissor frame support bars making it the strongest mid-rise lift in its class
• Dual master hydraulic cylinder combined with dual equalizing cylinders provides a safe and level 6,000 pound lifting capacity.
• Solid‐steel safety lock bars engage automatically during ascent.
• Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. 
  (NOTE: Requires min. 50 PSI, 10‐CFM air source at time of installation.)
• A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome    release bars or lock release handles.
• Hinge point features Zerk grease fitting to allow lubrication at critical wear areas.
• Drive‐over ramps fold down during ascent and feature non‐marring wheels to protect garage floors.
• Comes standard with four durable cushioned‐rubber contact blocks providing fast vehicle set‐up.
• Non‐skid approach ramps help to prevent slipping during approach and vehicle positioning.
• Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue.
• Powder coat finish provides a long lasting durable finish.

Lifting capacity: 6,000 lbs. / 2,722 kg
Lifting height less lift blocks: 42.5" / 1,087 mm
Lifting height with lift blocks: 44.5" / 1,125 mm
Lift Platform Dimensions: 19" x 66" / 484 mm x 1,676 mm
Width Between Platforms: 40" to 46" / 1,018 mm to 1,168 mm
Overall Width: 19" / 484 mm
Overall Length: 91.5" / 2,326 mm
Lowered Height: 4.3" / 110 mm
Lifting time: 35 sec
Motor: 110–220 VAC / 60 HZ / 1 Phase

* Special voltage available on request.

Design, materials, and specifications shown here are subject to change without notice.

Note: An air supply (minimum 50 psi / 10 CFM) is required for the safety-lock mechanisms to disengage. It is solely your responsibility to install and maintain the air supply.

 *Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2011 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak via contact@bendpak.com.


 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...



Business Info


Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak MDS-6LP Mid-Rise Scissor Car Lift to your wish list.