Loading... Please wait...

Categories

BendPak MDS-6K 6,000 Lb. Capacity, Open Center, Mid-Rise Car Lift - Surface Mount

Hover over image to zoom

  • Image 1
  • Image 2
BendPak
RRP: $2,865.00
$2,395.00 (You save $470.00)
SKU:
5175733
Weight:
2,318.00 LBS
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak MDS-6K 6,000 Lb. Capacity, Open Center, Mid-Rise Car Lift (Surface Mount)
This fully open-center design, both top and bottom, makes the MDS-6K a clear leader in convenience and work productivity.

MDS-6K a clear leader in convenience and work productivity.

Free Shipping Continental US

Direct shipping points only. Surcharge may apply to rural & interline points

Quick Specs

Lifting capacity: 6,000 lbs.
Lifting height w/blocks: 45.5"
Low height: 4.25"
Lifting time: 35 sec

 

 

 

 

 

 

 

       pdf.catalog.jpg           pdf.instructions.jpg             

 

 

BendPak’s 6,000‐pound capacity MDS‐6K models are open‐center mid‐rise auto‐ maintenance lifts for servicing passenger cars, SUV’s and light trucks. The exclusive open‐center design of the MDS‐6K not only allows full unobstructed access to the underside of the car, but is also clear of frame cross members on the floor that are typical with other mid‐rise lifts. This fully open‐center design, both top and bottom, makes the MDS‐6K a clear leader in convenience and work productivity. If you’re looking to flush mount your lift in the floor for a smooth sub‐surface installation, be sure to choose the model MDS‐6KF

Para información en Español, haga clic aquí.

The MDS-6K features wide lifting platforms combined with durable cushioned‐rubber contact blocks. Simply drive the vehicle over the lowered scissor ramps and position the soft and durable rubber blocks under the vehicle lifting points for fast and easy vehicle positioning and set‐up. The user‐friendly power console features simple operator controls like up, down, and safety lock buttons. A small footprint, easy installation and adaptable 110V/240V power unit makes the MDS‐6K the perfect lift that fits any shop or home garage. 

NOTE: The lift platform and contact blocks allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick‐up points on most vehicles. Be sure to compare your vehicle specifications, including ground clearance and overall height with the specifications shown before you purchase.

 

*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for complete listings or contact BendPak viacontact@bendpak.com.

 Each lift platform features four solid steel-scissor frame support bars making it the strongest mid-rise lift in its class.

• Dual master hydraulic cylinder combined with dual equalizing cylinders provides a safe and level 6,000 pound lifting capacity.
• Solid‐steel safety lock bars engage automatically during ascent.
• Convenient stainless‐steel pneumatic cylinders simultaneously release safety locks during descent with a simple push of a button. (NOTE: Requires min. 50 PSI, 10‐CFM air source at time of installation.)
• A push‐button safety lock release system is operated away from the lift and allows operators to safely deactivate the locks without the need to push or pull cumbersome release bars or lock release handles.
 Hinge point features Zerk grease fitting to allow lubrication at critical wear areas.
 Drive‐over ramps fold down during ascent and feature non‐marring wheels to protect garage floors.
• Comes standard with four durable cushioned‐rubber contact blocks providing fast vehicle set‐up.
 Non‐skid approach ramps help to prevent slipping during approach and vehicle positioning.
• Three locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue.
 Powder coat finish provides a long lasting durable finish.
 Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines.


floorplan2.jpg 
How to choose the right car lift for you 

Safe balancing for BendPak car lifts

BendPak's Top 10 Car Lift Buyers Guide


  • Lifting capacity: 6,000 lbs. / 2,722 kg
  • Lifting height less lift blocks: 44" / 1,119 mm
  • Lifting height with lift blocks: 45.5" / 1158 mm
  • Lifting time: 35 sec
  • Lower Lock Position: 18.7" (-4.25" for sub-floor install)
  • Middle Lock Position: 29.7" (-4.25" for sub-floor install)
  • Upper Lock Position: 40" (-4.25" for sub-floor install)
  • Motor: 110 - 240 VAC / 50 - 60 Hz / 1 Ph*
  • Overall Width: 18.5" / 470 mm
  • Overall Length: 79.5" 

* Motor is dual voltage. Will be shipped wired low voltage. If 208/230-volt operation is required, the motor will have to be re-wired according to the wiring diagram found on the motor data plate. Special voltages available upon request. The design, material and specifications are subject to change without notice. 

 

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak MDS-6K 6,000 Lb. Capacity, Open Center, Mid-Rise Car Lift - Surface Mount to your wish list.