Loading... Please wait...

Categories

Bendpak HDSO-14AX 14,000-Lb. Capacity Open Front Alignment Lift - Color Grey

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
BendPak
RRP: $9,905.00
$8,285.00 (You save $1,620.00)
SKU:
5175153
Availability:
BendPak HDSO-14AX Open Front Alignment Vehicle Lift
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description


bendpak-authorized-dealer.gif

BendPak HDSO14AX 14,000 Lb. Capacity / Alignment / Extended / Open Front / Includes Turnplates and Slip Plates
The HDSO14AX is the sturdy beast you want as the backbone of your shop, especially if you specialize in servicing larger, low ground-clearance vehicles. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. We call it “free-floating.” You’ll call it unbelievably easy. This model is available with optional drive-thru ramps, drip trays and rolling jacks.

pdf.catalog.jpg  pdf.instructions.jpg      5-2-1-warranty.jpg

 

 

Quick Specs

Lifting capacity: 14,000 lbs.
Overall width: 143"
Overall length: 244"
Max rise: 70"
Min 4-wheel alignment: 89"
Max 4-wheel alignment: 156"
Max 2-wheel alignment: 182"
   

 

 

 

 

 

 

 

Alignment Lifts by BendPak

HDSO14AX

SKU# 5175153

14ax.jpg

Capacity

Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle 7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle 7,000 lbs. (3,175 kg)

Rise

A - Min. Runway Height:7.625" (194 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:77.625" (1,972 mm)
Time to Full Rise:60 seconds
D - Overall Width (FRONT)143” (3,632 mm)
E - Overall Width (REAR)130” (3,301 mm)
F - Outside Length215" (5,472 mm)
G - Overall Length243" (6,191 mm)
H - Height of Columns (FRONT)105" (2,664 mm)
I - Height of Columns (REAR)103” (2,613 mm)
J - Width Between Columns (FRONT)123” (3,124 mm)
K - Width Between Columns (REAR)120” (3,046 mm)
L - Drive-Thru Clearance 97” (2,464 mm)
M - Runway Width 20.5” (520 mm)
N - Length of Runways199" (5,054 mm)
O - Width Between Runways 45" (1,143 mm)
P - Min. 4-Wheel Alignment 89" (2,261 mm)
Q - Max. 4-Wheel Alignment 156" (3,962 mm)
R - Max. 2-Wheel Alignment 182" (4,623 mm)

Minimum Wheelbase

Rated Capacity:140" (3,556 mm)
75% Capacity:120" (3,048 mm)
50% Capacity:100" (2,540 mm)
25% Capacity:80" (2,032 mm)

Locking

Locking Positions:13
Lock Spacing:4

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Shipping

Weight:3,102 lbs. (1,407 kg)
Dimensions:209" x 22" x 44" (5,309 mm x 559 mm x 1,118 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 

 

14,000-lb. Capacity / Open-Front Alignment Lift / Extended / Includes Turnplates and Slip Plates


The HDSO14AX is an open-front, 14,000-lb. capacity alignment lift. The “open” design makes it easier to access the front turn plates and undercarriage. Our alignment system features front turn plates and rear slip plates built right into the runways. The wheels always respond to your adjustments with no resistance or hassle. This car lift is available with optional drive-thru ramps, drip trays and rolling jacks.

Open-Front Design and 14,000 lbs. of Might

We engineered the HDSO14AX alignment lift without a front crossbar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This is a must for busy alignment bays. Additionally, for precise front-lift leveling, nothing beats our patented, adjustable front outrigger tubes. The infinitely adjustable pitch compensates for excessive loads and sloped floors.

Slip plates

Rear-facing multi-caster slip plates and front-facing turn plates permit precise, free-floating alignment.

Turn plates

This alignment lift features two recessed turn plate pockets that let you freely position the corrosion-resistant, galvanized turn plates.

Dual-hub cable sheaves

BendPak alignment lifts include strong, durable and oversized 10.5” diameter cable sheaves within the runway and cross tubes, as well as 2.25” diameter sheave axles. These powerful components keep your car lift running for many years, far past the point other brands’ lifts have already given out or required expensive parts replacements.

Heavy-duty aircraft cable

BendPak runs four aircraft-quality steel cables (that measure in at a robust 1/2” diameter, 6 x 25), within the columns. They are literally the ultimate standard for high-quality cable construction and safe lifting.

Adjustable height locking positions

Alignments are often done by different mechanics in a busy shop. The multiple locking heights allow different people to work on the HDSO14AX alignment lift at the height appropriate for them. Since it’s an open-front design, getting under is easy no matter how tall they are.

Built-in lubrication

Grease fittings are an essential component to every car lift we make. They keep the cable sheaves lubricated, so you don’t have to worry about productivity and safety in our design.

Flow restrictor

Should anything catastrophic occur in your shop to disrupt the functionality of your lift, we want you to feel confident that BendPak keeps your vehicles and equipment safe. If the hydraulics are cut or lose all pressure, which would be extraordinary, the built-in hydraulic flow divider still ensures a safe, even descent at all times.

Spring-loaded safety locks

Our fully adjustable locks are also found on the HDSO14AX alignment lift. Springs engage as the lock ascends into position. This design also helps keep the platforms even, even if there’s a tiny slope to your garage flooring.

Push-button pneumatic lock release

Air locks make releasing the locks simultaneous, each and every time. The instant release ensures the alignment lift platforms descend evenly.

Secondary lock system

A backup lock system protects the alignment system in the event that cable slack is detected. When this occurs, the cable is immediately “grabbed,” and the entire operation ceases immediately.

Integrated design

BendPak cables, cable sheaves and airlines run internally throughout the structure. Every one of these parts is susceptible to damage and extra wear if left exposed. We keep the look and feel of this alignment lift clean while protecting the most critical parts and components.

Electric-hydraulic power system

The power unit never needs to be maintained or adjusted. It’s also so easy and safe to use, we recommend it for both home and commercial applications.

Non-skid runways

Treaded runways prevent slips and vehicle accidents on the alignment lift. Even when the platforms get oily, slick or wet, the treads will hold the wheel in place.

Longer approach ramps

Because our approach ramps are longer, they make it easier to load low ground-clearance vehicles. So easy, in fact, that you’ll never scratch up the bottom of your car or struggle with the gas pedal to give enough gas without shooting onto the ramp at an unsafe speed. Simply glide on and start aligning.

Flexible protective conduit

The durable conduit that surrounds the airlines and hydraulic hoses prevents damage to the cables. It also keeps you safe from electrical shock.

Rolling bridge jacks

Rolling bridge jacks turn your alignment lift into an all-purpose four-post lift. No need to transfer to a different car lift to perform wheel and brake service. Now you can change brake rotors right before you align the wheels, all on the same lift. Rolling bridge jacks are a safe and space-saving way to increase shop capability without purchasing more equipment.

 

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the Bendpak HDSO-14AX 14,000-Lb. Capacity Open Front Alignment Lift - Color Grey to your wish list.