Loading... Please wait...

Categories

BendPak HD-7P Tall 4-Post 7,000 LB Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
BendPak
RRP: $3,700.00
$3,095.00 (You save $605.00)
SKU:
5175510
Weight:
1,942.00 LBS
Shipping:
Free Shipping
Commercial delivery, I have Fork Lift:
Residential delivery, I have Fork Lift (Add $40):
I will pick up from a local freight terminal:
Call me to make shipping arrangements:

 Product Description


bendpak-authorized-dealer.gif
BendPak 7,000 LB  4-Post Lift HD-7P Short Run Ways Extra Tall
 
Shorter length and extra height, the HD-7P is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

 

 

Quick Specs

Lifting capacity: 7,000 lbs.
Overall length: 200"
Height of columns: 100"
Max rise: 82"
Length of runways: 165"
Motor: 220 VAC / 1 Ph

   pdf.catalog.jpg   pdf.instructions.jpg     ali-etl-logo.jpg

  •  

     

     

    Description

    The HD-7P is a true space-saving powerhouse. The perfect service lift for shops with limited floor space or a home car port, the HD-7P requires no special foundation or complicated installation. About the size of a typical parking space, this lift doubles nicely as a residential / commercial parking lift. The applications are endless, but what else would you expect from BendPak? After being in this business for over 40 years, our reputation is as solid as our lifts. And if you've ever owned a BendPak, you know that means a whole lot.

    Dependable design
    4 heavy-duty, high-quality, stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.

    Dual-hub cable sheaves
    Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub cable sheaves, even if they cost us more to make. When you buy BendPak, we throw in peace of mind as a free gift.

    Multi-level locking positions
    The HD-7P is equipped with multiple adjustable height locking positions for variable-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.

    Heavy-duty aircraft cable
    Each lift is supplied with 4 high-quality stainless steel lifting cables, rated at 14,400 lbs. each. The combined rating of these cables is more than 822% of the maximum lifting capacity of the entire lift! And we make sure it looks tidy too—all lifting cables are fully enclosed within the lift structure itself.

    Electric / hydraulic power system
    We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

    Large base plates
    10" x 12" base plates provide a solid foundation for the HD-7P.

    Single hydraulic cylinder
    Leak proof cylinder technology only available for BendPak four-post lifts 
    Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum reliable performance. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior design high durometer, mechanically-loaded rod seals make rod leakage a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

    Durable powder-coat finish
    All HD-Series lifts feature a durable powder-coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected before being sandblasted. Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, they're immediately dried to avoid rust production, and then outgassed. Outgassing pre-bakes the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely will cause chips in the powder. After the parts are washed and outgassed, any surfaces and / or threaded holes that need to be masked or plugged, are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatically grounded conveyor line. The powder is finally applied using an electrostatic spray gun. The powder “sticks" to the surface in a fashion similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400° F for 45 minutes.

    Caster kit
    Optional 4-piece caster kit makes your lift portable, with or without car.

    Integrated design
    Lifting cables, airlines, safety latches and sheaves are all fully enclosed.

    Low-deck runways
    Our low 4-1/2" runways accommodate even the lowest cars.

    Longer approach ramps
    These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

    Automatic safety locks
    Aircraft-quality stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device to engage in the unlikely event of cable failure.

     

    Features & Specifications
          • 7,000-lb. maximum lifting capacity
          • High lift with short runways
          • Electric / hydraulic power system
          • Single hydraulic cylinder mounted underneath runway
          • Internal anti-sway slider blocks in each column
          • Oversized self-lubricating cable rollers
          • High-speed lifting
          • Features heavy-duty 3/8" aircraft cable
          • Rugged 1-1/4" roller axles
          • Multi-position safety locks in each column
          • Adjustable lock ladders
          • Ramps feature non-skid surface
          • Push-button pneumatic safety release
          • Optional 4,500-lb. capacity rolling jack available (Model RJ-45)


      Best Warranty Car Lifts - BendPak

      Will your four-post car lift fit?

    • floorplan2.jpg


    • Safe balancing for BendPak car lifts

      How to choose the right car lift for you


       

    • MODEL HD-7P
      Configuration Short Runway / Narrow / High Rise
      Lifting Capacity 7,000 Lbs. / 3175 Kg.
      Max Capacity / Front Axle 3,500 Lbs. / 1588 Kg.
      Max Capacity / Rear Axle 3,500 Lbs. / 1588 Kg.
      A - Overall Width 99-3/4" / 2534 mm.
      B - Outside Length 174” / 4420 mm.
      C - Overall Length 200” / 5080 mm.
      D - Height of Columns 100” / 2540 mm.
      E – Min. Runway Height 4-1/2” / 114 mm.
      F – Max. Rise 82” / 2083 mm.
      G - Max. Lifting Height 86-1/2" / 2197 mm.
      H - Width Between Columns 89-3/4" / 2280 mm.
      I - Runway Width 19” / 483 mm.
      J - Width Between Runways (*) NARROW 37-1/2" / 952 mm.
      J - Width Between Runways (*) WIDE N/A
      K - Runway Centerline (*) NARROW 56-1/2" / 1435 mm.
      K - Runway Centerline (*) WIDE N/A
      L - Outside Edge of Runways (*) NARROW 75-1/2" / 1918 mm.
      L - Outside Edge of Runways (*) WIDE N/A
      M - Drive-Thru-Clearance 76-1/2" / 1943 mm.
      N - Length of Runways 164” / 4166 mm.
      Min. Wheelbase @ Rated Capacity 115" / 2921 mm.
      Min. Wheelbase @ 75% Capacity 100" / 2540 mm.
      Min. Wheelbase @ 50% Capacity 85" / 2159 m.
      Min. Wheelbase @ 25% Capacity 70" / 1778 mm. 
      Locking Positions 15
      Lock Spacing Every 4" / 102 mm.
      Lifting Time 35 Seconds
      Standard Motor (**) 208-230 VAC / 50-60 Hz. / 1Ph.

      * This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page.
      ** Special Voltages Available Upon Request
      The design, material and specifications are subject to change without notice.

      Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to function. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

      Featured accessories for the HD-7P

      WSA-100
      WSA-100
      (5210436-Please refer to page)
      RJ-45
      RJ-45
      (5175343)
      Aluminum Deck
      Aluminum Deck
      (5375645)
      Drip Trays
      Drip Trays
      (5700301)
      JP-3
      JP-3
      (5175800)
      JP-6
      JP-6
      (5175349)
      DP-30
      DP-30
      (5150509)
      Caster Kit
      Caster Kit
      (5210997)
      AK-14
      AK-14
      (5174008)

       

 Warranty Information

BendPak WARRANTY
BendPak 2-Post Lifts and 4-Post Lifts are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, cables, chains, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak X-Rack Scissors Lifts are warranted for 18 months
on equipment structure, to be free of defects in material and workmanship. Power units, hydraulic cylinders, and all other assembly components such as turnplates, slip plates, valves, switches etc. are warranted for one year against defects in material or workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Low-Rise Lifts and Rolling Jacks are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak MCL Mobile Column Lifts are warranted for one year
on equipment structure and all operating components, to be free of defects in material and workmanship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tubing Benders are warranted for five years
on equipment structure, to be free of defects in material and workmanship. Motors, hydraulic cylinders, valves, switches and all other assembly components and tooling are warranted for one year against defects in material or workm anship under normal use. BendPak Inc. shall repair or replace at their option for the warranty period those parts returned to the factory freight prepaid which prove upon inspection to be defective. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

BendPak Tri-Max Series Air Compressors are warranted for five years
on the compressor tank, two years on the compressor pump and one year on the electric motor and all other assembly components such as valves and switches against defects in material or workmanship under normal use. The five-year tank warranty will apply to ASME air receivers only if they are installed on rubber anti-vibration pads or approved equivalent. BendPak Inc. will pay labor costs for the first 12 months only on parts returned as previously described.

These warranties do not extend to...
defects caused by ordinary wear, abuse, misuse, shipping damage, improper installation, voltage or lack of required maintenance;
damages resulting from purchaser’s neglect or failure to operate products in accordance with instructions provided in the owner’s manual(s) and/or other accompanying instructions supplied;
normal wear items or service normally required to maintain the product in a safe operating condition;
any component damaged in shipment;
•other items not listed but may be considered general wear parts;
damage caused by rain, excessive humidity, corrosive environments or other contaminants.
THESE WARRANTIES DO NOT EXTEND TO ANY COSMETIC DEFECT NOT INTERFERING WITH EQUIPMENT FUNCTIONALITY OR ANY INCIDENTAL, INDIRECT, OR CONSEQUENTIAL LOSS, DAMAGE, OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE, OR MALFUNCTION OF A BENDPAK INC PRODUCT OR THE BREACH OR DELAY IN PERFORMANCE OF THE WARRANTY.

This warranty is exclusive and in lieu of all other warranties expressed or implied. BendPak makes no warranty on components and/or accessories furnished to BendPak by third parties. These are warranted only to the extent of the original manufacturers warranty to BendPak. Other items not listed but may be considered general wear parts. BendPak reserves the right to make design changes or add improvements to its product line without incurring any obligation to make such changes on product sold previously. Warranty adjustments within the above stated policies are based on the model and serial number of the equipment. This data must be furnished with all warranty claims.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HD-7P Tall 4-Post 7,000 LB Lift to your wish list.