Loading... Please wait...

Categories

BendPak COMBO HDS-14X/RBJ-7000 - 14000 LB Extended Lenght 4-Post Lift - 2 x RBJ-7000 Bridge Jacks Included

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
  • Image 13
  • Image 14
  • Image 15
BendPak
RRP: $9,310.00
$7,475.00 (You save $1,835.00)
SKU:
5175173/5175986 (PR)
Weight:
2,715.00 LBS
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak Combo 14,000 LB  4-Post Lift HDS-14X Extended Limo Style -2 x RBJ-7000  (7000 Lbs Capacity) Rolling Bridge Jacks included
BendPak's "HDS‐Series" four‐post lifts are a whole new breed of rugged. They’re newly engineered car and truck lifts that work better, are built to last, and feature upgrades that increase safety, durability and productivity.

Free Shipping Continental US

  

 

 

pdf.catalog.jpg pdf.instructions.jpg ali-etl-logo.jpg

*14,000-pound lifting capacity 
*130" Wide
*Overall Lenght 271"
*Height of Colums 93"
*Lenght of Run Ways 229"
*Max Rise 70"
*Lifting Time 60 sec.
*Motor 220 VAC/1 Ph
 

Description

 

 

BendPak's HDS-Series 4-post lifts are engineered to meet the strenuous demands of even your toughest professional lifting jobs. In particular, this HDS-14 is the kind of sturdy beast you want as the backbone of your shop. Designed into every HDS-Series lift is a laundry list of key features as long as your arm to ensure that BendPak is the absolute best you can buy. 

Our competitors might say we overdo it, but we don't include components for the sake of frills and flash. We design our lifts with the attributes we feel should come standard with every lift—the kind of lift we would want to (and do) own. You can always count on BendPak lifts for increased durability, safety and productivity. Spend less time worrying about what you're working under and more time doing what you love. Our commercial-grade lifts are second to none and recognized the world-over as benchmarks of dependability and quality.

The HDS-14, HDS-14X and the Super-Tall HD-14TL four-post models provide a generous 14,000-lb. lifting capacity and feature extended runways to accommodate a wide variety of vehicle wheelbases.

Dual-hub cable sheaves
Huge 10-1/2” diameter cable sheaves within the runway and cross tubes combined with massive 2-1/4” diameter sheave axles dramatically improve cable wear and critical component lifespan meaning you’ll spend less money in service related expenses down the road. Dual-hub cable sheaves reduce stress, fatigue and wear.

Sheeves.jpg

 
Heavy-duty aircraft cable

BendPak's HDS-Series lifts feature four ½” diameter 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 pounds each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.

Under-runway.jpg

 
Built-in lubrication

Grease fittings are located on every sheave and sheave axle to help keep these critical parts well lubricated and to simplify periodic maintenance.

warning-side.jpg

 

Hidden hydraulic cylinder
Leak proof cylinder technology only available for BendPak four-post lifts
Each HDS-Series four-post is equipped with a single 3-1/2” diameter hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. The welded cylinder body is made from high strength steel tubing produced to exceed ASTM specifications.

cylinder.jpg

 

The hydraulic cylinder features a one-piece, pilot fitted, machined steel piston wrapped with high-durometer, mechanically loaded rod seals, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001½ diametrically, to ensure superior cylinder operation and life.. This combination of superb base material and superior processing ensures straight, smooth, cylinders that will provide years and years of dependable trouble-free service.

hydraulic-cylinder-design.jpg

 

Flow restrictor
An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

Integrated-hydraulic-flow-restrictor.jpg

 

Durable powder coat
A durable powder coat finish can withstand harsh environments and chemical sually inspected then sandblasted. (2) All parts are washed in five-stage phosphate tanks then immediately dried, to avoid rusting. (3) All surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. (4) The parts are given a quick thinner wipe to remove any light debris or fingerprints. (5) Finished parts are hung on an electro-statically grounded conveyor line, then powder is applied using an electrostatic spray gun. (6) Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.

factory-coat.jpg

 
Large base plates
12" x 12" base plates provide a solid foundation for the HDS-14. 
 

Spring-loaded safety locks
Spring-loaded safety locks automatically engage continuously during rise and adjustable safety ladders allow for precise runway leveling even when installed on sloped floors.

drawing.jpg

 

Push-button pneumatic lock release
A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders will provide years of trouble-free service.

valve.jpg

 

Secondary lock system
A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event of an unexpected cable failure.

srping-loaded-slack-cable.jpg

 
Integrated design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed within lift structure. 

 under-runway-2.jpg

 
Adjustable height locking positions
Each column features multiple adjustable height locking positions for variable-height parking and infinite leveling. 12" x 10" base plates provide a solid foundation.

 ladder.jpg

 

Electric hydraulic power system
A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach.

power-supply.jpg

 
Non-skid runways

Non-skid runways provides maximum grip, even when the runway surface is wet or oily. Extended length approach ramps feature automatic rear wheel chocks and help when loading low ground clearance vehicles. 

Longer approach ramps

These approach ramps were designed a little longer to help when loading low ground clearance vehicles. It's the little bit that makes a big difference.

ramp.jpg

 

Flexible protective conduit
Hydraulic hoses and airlines are routed through a flexible protective conduit.

ramp-hose.jpg

 

Rolling bridge jacks
7,000-pound capacity rolling jacks (model RJ-7) make a great addition to increase service capacity. RJ-7 bridge jacks are used to raise the front or rear portion of a vehicle off the runways allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms and frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths. Each jack features three safety-lock positions and stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10-20 CFM.

hds-bridge-jack.jpg

 

 


*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list or contact BendPak viacontact@bendpak.com.

 

Features & Specifications

 

        • 14,000-lb. lifting capacity
        • Mid- to long-style approach ramps for low ground clearance vehicles
        • Runways include rail-kit for optional accessories
        • Single hydraulic cylinder mounted underneath runway
        • Fully enclosed lifting cables, safety locks, and sheaves
        • Internal anti-sway slider blocks in each column
        • Pneumatic push-button safety release
        • Features heavy-duty 1/2" aircraft cable
        • Safety locks enclosed in columns minimize pinch points
        • Oversized sheave diameter reduces cable fatigue
        • Oversized self-lubricating cable rollers
        • Rugged 1-3/4" roller axles
        • Multi-position safety locks in each column
        • Customizable power unit location
        • Approach ramps incorporate built-in rear-wheel chocks
        • Independent backup slack-cable safety latches
        • Runways feature non-skid surface
        • Optional drive-thru ramps available
        • Optional drip trays available
        • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
        • ETL approved

      Best Warranty Car Lifts - BendPak

      Safe balancing for BendPak car lifts

      How to choose the right car lift for you
           


      BendPak's Top 10 Car Lift Buyers Guide
      • Lifting capacity*: 14,000 lbs. / 6,350 kg
        • *Max capacity / front axle: 7,000 lbs. / 3,175 kg
        • *Max capacity / rear axle: 7,000 lbs. / 3,175 kg
      • Overall width: 130" / 3,301 mm
      • Outside length: 243" / 6,170 mm
      • Overall length: 271" / 6,893 mm
      • Height of columns: 93" / 2,362 mm
      • Runway min height: 7-5/8" / 192 mm
      • Max rise: 70" / 1,778 mm
      • Max lifting height: 77-5/8" / 1,970 mm
      • Width between posts: 120" / 3,046 mm
      • Runway width: 20" / 508 mm
      • Width between runways: 37-1/2" – 51" / 952 mm – 1,295 mm
      • Runway centerline: 57-1/2" - 71" / 1,460 mm - 1,803 mm
      • Outside edge of runways: 77-1/2" - 91" / 1,968 mm - 2,311
      • Drive-thru clearance: 98" / 2,482 mm
      • Length of runways: 229" / 5,816 mm
      • Min wheelbase @ rated capacity: 165" / 4,191 mm
      • Min wheelbase @ 75% capacity: 140" / 3,556 mm
      • Min wheelbase @ 50% capacity: 115" / 2,921 mm
      • Min wheelbase @ 25% capacity: 95" / 2,413 mm
      • Locking positions: 13
      • Lock spacing: every 4" / 102 mm
      • Lifting time: 60 sec
      • Motor: 220 VAC / 60 Hz / 1 Ph
      • Shipping weight: 2,105 lbs. / 955 kg
      • Shipping dimensions: 204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

      Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

       

 Product Videos

This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
  • This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
    Dave Kindig from KINDIG-IT-DESIGN and the fasting growing Hot ...

 Warranty Information

Warranty

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak COMBO HDS-14X/RBJ-7000 - 14000 LB Extended Lenght 4-Post Lift - 2 x RBJ-7000 Bridge Jacks Included to your wish list.