Loading... Please wait...

Categories

BendPak HDS-14 4-Post Lift 14000LB

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
BendPak
RRP: $5,435.00
$4,545.00 (You save $890.00)
SKU:
5175170
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak 14,000 LB  4-Post Lift HDS-14
BendPak's "HDS‐Series" four‐post lifts are a whole new breed of rugged. They’re newly engineered car and truck lifts that work better, are built to last, and feature upgrades that increase safety, durability and productivity.

 

pdf.catalog.jpg pdf.instructions.jpg ali-etl-logo.jpg 5-2-1-warranty.jpg

*14,000-pound lifting capacity 
*130" Wide
*Overall Lenght 241"
*Height of Colums 93"
*Lenght of Run Ways 199"
*Max Rise 70"
*Lifting Time 60 sec.
*Motor 220 VAC/1 Ph
 

Four-Post Lifts by BendPak

HDS-14

SKU# 5175170

14,000-lb. Capacity / Four-Post Lift / Standard Length


BendPak's HDS-14 four-post lift is a whole new breed of rugged. It features superior components that work better, are built to last and increase operator safety. If your service bay needs to get under heavy-duty, oversized vehicles on a daily basis, our 14,000-lb. capacity lift is exactly what you need.

 

hd-14.jpg

Capacity

Lifting Capacity*14,000 lbs. (6,350 kg)
*Max Capacity / Front Axle7,000 lbs. (3,175 kg)
*Max Capacity / Rear Axle7,000 lbs. (3,175 kg)

Rise

A - Min. Runway Height:7.625" (194 mm)
B - Max. Rise:70" (1,778 mm)
C - Max. Lifting Height:77.625" (1,972 mm)
Time to Full Rise:60 seconds

Outside Dimensions

D - Overall Width:130" (3,302 mm)
E - Outside Length:213" (5,410 mm)
F - Overall Length:241" (6,121 mm)
G - Height of Columns:93" (2,362 mm)

Inside Dimensions

H - Width Between Columns:120" (3,048 mm)
I - Drive-Thru Clearance:98" (2,489 mm)

Runways

J - Runway Width:20" (508 mm)
K - Length of Runways:199" (5,055 mm)
L - Width Between Runways:37.5" (953 mm) or 51" (1,295 mm)
M - Runway Centerline:57.5" (1,461 mm) or 71" (1,803 mm)
N - Outside Edge of Runways:77.5" (1,969 mm) or 91" (2,311 mm)

Minimum Wheelbase

Rated Capacity:140" (3,556 mm)
75% Capacity:120" (3,048 mm)
50% Capacity:100" (2,540 mm)
25% Capacity:80" (2,032 mm)

Locking

Locking Positions:13
Lock Spacing:Every 4" (102 mm)

Power Unit

Motor:220 VAC / 60 Hz / 1 Ph
Noise:45 dB

Shipping

Weight:2,605
Dimensions:212" x 24" x 40" (5,385mm x 610 mm x 1,016 mm)

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Features

  • 14,000-lb. lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Mid to long-style approach ramps for low ground clearance vehicles
  • Runways include rail-kit for optional accessories
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Pneumatic push-button safety release
  • Features heavy-duty 1/2" aircraft cable
  • Safety locks enclosed in columns minimize pinch points
  • Oversized sheave diameter reduces cable fatigue
  • Oversized self-lubricating cable rollers
  • Rugged 1.75" roller axles
  • Multi-position safety locks in each column
  • Customizable power unit location
  • Approach ramps incorporate built-in rear-wheel chocks
  • Independent backup slack-cable safety latches
  • Runways feature non-skid surface
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional 7,000-lb. capacity rolling jacks available (Model RJ-7)
  • ETL approved

 

HDS-14 Four-Post Car Lift: No Such Thing as Overboard

BendPak's HDS-14 four-post lift is engineered to meet the strenuous demands of your toughest professional lifting applications. Incorporated into every lift is a laundry list of key features as long as your arm, ensuring BendPak lifts remain the absolute best.

Our competitors might say we overdo it, but we don't include components for the sake of frills and flash. We designed this four-post lift with the attributes we feel should be considered standard, not add-ons or extras. You can always count on BendPak lifts for increased durability, safety and productivity. Spend less time worrying about what you're working under and more time doing what you love. Our commercial-grade car lifts are second to none and recognized worldwide as the industry benchmarks in dependability and quality.

Extended runways

14,000-lb. vehicles have wheelbases that need specialized equipment to keep them safe and supported. Our extended runways prevent wear and tear on your vehicle. Driving onto the runway is safe and simple for vehicles of all sizes.

Dual-hub cable sheaves

Dual-hub cable sheaves reduce stress, fatigue and wear. Huge 10.5” diameter cable sheaves within the runway and cross tubes combine with massive 2.25” diameter sheave axles. This dramatically improves cable wear and critical component lifespan, which means less money in service-related expenses down the road.

Heavy-duty aircraft cable

This lift features four, 1/2” diameter, 6 x 25 stainless-steel lifting cables that have a breaking strength of over 14,000 lbs. each. This aircraft-quality cable was specifically designed for lifting applications and provides a great balance between abrasion resistance and fatigue.

Built-in lubrication

Grease fittings are located on every sheave and sheave axle to help keep these critical parts well-lubricated and simplify periodic maintenance.

Flow restrictor

An integrated hydraulic flow restrictor provides a controlled descent in the unlikely event of an unexpected hose rupture.

Large base plates

10" x 12" base plates provide a solid foundation for every 14K capacity four-post lift.

Spring-loaded safety locks

Safety locks automatically engage continuously during rise, and adjustable safety ladders allow for precise runway leveling, even when installed on sloped floors. This is a crucial feature because even small slopes can impact the safe-keeping of your garage or service bay.

Push-button pneumatic lock release

A simple push-button pneumatic lock release makes lowering operations simple and fast. Aircraft-quality stainless steel and aluminum pneumatic cylinders provide years of trouble-free service.

Secondary lock system

A secondary lock system is on constant guard and acts as a slack-cable device in the unlikely event your four-post lift experiences an unexpected cable failure.

Integrated design

Lifting cables, airlines, safety latches and sheaves are all fully enclosed within the structure. That doesn’t mean they’re hard to find: you’re always able to look in and perform a visual inspection during operation.

Adjustable height locking positions

Each column features multiple height locking positions for variable-height parking and infinite leveling.

Electric-hydraulic power system

A maintenance-free electric hydraulic power system assures ultimate dependability. All operator controls are conveniently located within easy reach. Raising and lowering the arms should be as easy as pushing a button—and it is!

Non-skid runways

Non-skid runways provide maximum grip, even when the runway surface is wet or oily.

Longer approach ramps

These approach ramps were designed a little longer to help when loading low ground-clearance vehicles. It's the little bit that makes a big difference.

Flexible protective conduit

Hydraulic hoses and airlines, if not properly managed, can be a legal and functional nightmare. ALI inspectors routinely write citations and refuse to pass inspected lifts because of visible damage to cables. We route all our cables through flexible, non-metallic tubing that protects against electrical shocks from worn cables, as well as general wear that occurs from heavy use over time.

Rolling bridge jacks

Optional 7,000-lb. capacity rolling jacks (model RBJ7000) make a great addition. RBJ7000 bridge jacks are used to raise the front or rear portion of a vehicle off the runways, allowing operators to perform efficient wheel and brake service. A pair of jacks allows the entire vehicle to elevated. Each jack has telescoping arms with frame contact pads that can be extended over the runways and positioned under vehicle lifting points. Telescoping rail supports accommodate adjustable runways for different tread widths. Each jack features three safety-lock positions, as well as stackable truck and van adapters for increased lifting height and better access to frame contact points on high ground-clearance vehicles. The jacks come equipped with a commercial grade air-hydraulic pump requiring a maximum pressure of 125 PSI and 10 – 20 CFM.

Choose extended length

A longer lift is useful for vehicles like limos, SUVs and trucks, and that’s where the HDS-14X extended 4-post lift comes in handy. We call it our “limo style” lift because of how much front-to-back clearance it offers, so you can make it over or under the lift with ease. This lift adds additional versatility and craftsmanship to your garage.

Choose open-front design

We engineered the HDSO14P open-front ​4-post lift without a front cross bar, so operators can easily enter and exit from beneath the vehicle. Now the process of front-end adjustment becomes quick and trouble-free. This specialty car lift is a must for busy service bays.

 

 Product Videos

This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
  • This Is My BendPak Dave Kindig-it-Design & Bitchin' Rides BendPak 4-Post
    Dave Kindig from KINDIG-IT-DESIGN and the fasting growing Hot ...

 Warranty Information

Warranty

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HDS-14 4-Post Lift 14000LB to your wish list.