Loading... Please wait...

Categories

BendPak XPR-10AS 168 Extra Tall 168" Asymmetric Two Post Lift 10,000 LBS Capacity

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
BendPak
RRP: $3,975.00
$3,325.00 (You save $650.00)
SKU:
5175401
Weight:
1,798.00 LBS
Availability:
Ships in 48 HRs.
Shipping:
Free Shipping
Minimum Purchase:
1 unit(s)

 Product Description

 

bendpak-authorized-dealer.gif

BendPak 10,000 LB  2-Post Lift XPR-10AS 168" Tall  Asymmetric Dual Width
The powerful and secure XPR-10AS-168 is an incredibly rapid two‐post lift with a robust menu of features to increase efficiency and productivity. Extended height columns provide added overhead clearance and an adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. This true asymmetric lift features 30° rotated columns for added door-opening clearance and interior car access. The exclusive Tru-Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column).

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

Quick Specs

Lifting capacity: 10,000 lbs.
Overall height: 145"
Overall width: 137" - 145"
Min pad height: 4"
Rise: 69"
Motor: 220 VAC / 1 Ph
Rise time: 45 sec.
   

 

pdf.catalog.jpg pdf.instructions.jpg ali-etl-logo.jpggold-label.jpg   5-2-1-warranty.jpg

 

 Two-Post Lifts by BendPak

XPR-10AS-168 (Extra Tall)

SKU# 5175401

10,000-LB. CAPACITY / ASYMMETRIC CLEARFLOOR / ADJUSTABLE WIDTH / SCREW PADS


Every XPR-10AS features Direct-Drive technology that’s only available with BendPak. The asymmetrical design of this lift has rotated columns, which makes it easier to enter and exit the vehicle and reduces the chance of door dings and dents. If you have a 12’ ceiling, you can have this lift in your home today—in wide or narrow installation!

 XPR-10AS SPECIFICATIONS

CAPACITY

Lifting Capacity* 10,000 lbs. (4,536 kg)
*Max Capacity / Front Axle 5,000 lbs. (2,268 kg)
*Max Capacity / Rear Axle 5,000 lbs. (2,268 kg)

RISE

A - Rise: 69" (1,753 mm)
B - Rise + Pad Only:73" (1,854 mm)
C - Rise + Pad + 63 mm Adapter: 79" (2,007 mm)
D - Min. Height + Pad: 4" (102 mm)
Time to Full Rise: 45 seconds

OUTSIDE DIMENSIONS

E - Height Overall:168" (3,683 mm)
F - Width Overall: 137" (3,480 mm) or 145" (3,683 mm)
G - Outside Columns: 133" (3,378 mm) or 141" (3,581 mm)

INSIDE DIMENSIONS

H - Inside Columns: 104" (2,642 mm) or 112" (2,845 mm)
I - Drive-Thru Clearance: 94" (2,388 mm) or 102" (2,591 mm)
J - Floor To Overhead Switch: 141" (3,581 mm)

ARMS & PADS

K - Front Arm Reach: (MIN) 23.5" (597 mm)
K - Front Arm Reach: (MAX) 45.5" (1,156 mm)
L - Rear Arm Reach: (MIN) 42.5" (1,080 mm)
L - Rear Arm Reach: (MAX) 60" (1,524 mm)
Screw Pad Adjustment: 2" (51 mm)
Max Load Per Arm 2,500 lbs. (1,134 kg)

POWER UNIT

Motor: 220 VAC / 60 Hz / 1 Ph
Noise: 45 dB

FEATURES

  • 10,000‐lb. lifting capacity
  • Expandable top beam accommodates wide or narrow drive‐thru configuration
  • Double‐telescoping screw pads offer increased versatility
  • Added overhead safety shutoff bar
  • Exclusive Tru‐Metric arm design for more versatile arm positioning
  • 30° rotated single‐piece columns
  • Single‐point safety release
  • Drop‐end arms provide a lower pad height
  • Dual hydraulic direct‐drive cylinders
  • Oversized 53" tall carriage for superior strength and durability
  • Electric / hydraulic power system
  • Large, 17" x 19" A36 steel base plate
  • Self‐lubricating dura‐glide UHMW polyethylene bearing system
  • Safety locks in each column spaced every 3"
  • Plated arm restraints and arm pins for rust prevention
  • Heavy‐duty 1/2" aircraft‐quality equalizer cables
  • Oversized cable sheave diameter reduces cable fatigue
  • 4‐piece 63 mm stackable adapter set comes standard
  • Triple‐telescoping arm design
  • Versatile drop‐in contact pads with stackable adapters
  • ETL Approved

XPR-10AS TWO-POST LIFT PROTECTS VEHICLES AND MAKES LIFTING EASY

A 10K capacity BendPak car lift is a smart addition to any shop or garage. Professionals love the power and reliability of the lift, and they know our reputation precedes us. Meanwhile, DIY’ers with high ceilings know BendPak means safe lifting in the comfort of home. Skip the headache of an uncertified, poorly welded piece of garbage and trust our best to lift your best.

Our XPR‐10AS asymmetric two‐post lift offers the convenience of wide or narrow installation, all in one configurable package. This durable, safe and reliable car lift features expandable top beam and Tru‐Metric arms to suit virtually every vehicle lifting requirement. The simple yet highly sophisticated lift design keeps service and maintenance costs to a minimum, delivering lower operating expenses and higher productivity. These true asymmetric lifts feature 30° rotated columns for added door‐opening clearance and interior car access. The exclusive Tru‐Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column).

All asymmetric models features rotated columns for added clearance when opening vehicle doors. At the same time, swing-away arms provide a larger drive-thru clearance. These models feature the exclusive Tru-Metric arm design to provide variable arm-position configurations—either symmetric or asymmetric, providing greater versatility for greater service capability. It's like having two car lifts in one!

DIRECT-DRIVE TWO-POST CAR LIFT TECHNOLOGY

BendPak XPR-10 two-post lifts feature low-pressure HVLP Direct-Drive cylinders: no more lifting chains or screws. Dual HVLP low-pressure cylinders minimize leakage, offer better reliability, smoother operation and fewer maintenance costs throughout the life of your lift. High volume and low pressure equates to less workload placed on the entire hydraulic system. Direct-Drive technology is preferred on commercial-grade two-post car lifts, as it has it has fewer moving parts than a chain-over-roller cylinder configuration. Pressurized hydraulic fluid flows from the power unit to the hollow cylinder rods, entering the cylinder body and filling its internal cavity. The pressure of the hydraulic fluid extends the piston rod downward, raising the cylinder body and lift carriages. A dual-synchro equalization system maintains equal lifting and provides operators with a stable, level vehicle working condition.

TWO-STAGE TELESCOPING SCREW PAD ASSEMBLY KIT

Double-telescoping screw pads come standard with every asymmetrical 10K car lift. These polyurethane pads are ideal for intense shop environments and busy mechanics who can’t afford money-sucking downtime. 63 mm stackable adapters are included for even more versatility.

LOW-PROFILE, DROPPED-END FRAME CONTACT PADS

Get under more cars with these low-profile contact pads. A dropped-end frame makes servicing more vehicles easier than ever.

TRIPLE-TELESCOPING FRONT ARMS AND TWO-STAGE REAR ARMS

The two-post lift accommodates almost every wheelbase. The pads can be extended or retracted in almost any imaginable configuration.

LOWERED ARM TUBE SUPPORTS

Arm tube supports on other lifts have a tendency to scratch vehicle doors. We made ours lower to the ground, so they avoid contacting and damaging vehicle doors.

AUTOMATIC ARM RESTRAINTS

As soon as the car lift arms rise, arm restraints engage automatically. They disengage when the lift carriage descends, making them easy to reposition once the vehicle is completely lowered.

TALLER LIFT CARRIAGES

53” lift carriages are taller than other manufacturers’ carriages. This reduces stressed placed on the load bearings, as well as the columns. It also extends the life of your lift.

MAINTENANCE-FREE LOAD BEARINGS

UHMW load bearings never need to be lubricated, and they last forever. That’s why a BendPak two-post lift never features weaker, old-fashioned roller bearings.

SINGLE-PIECE COLUMNS

By ensuring each lift column is made from a single piece of steel, we provide the highest-quality support system for your vehicle.

SINGLE-POINT SAFETY RELEASE

The single-point safety release makes the car lift easier and safer to operate.

ON THE LEVEL

Dual-synchro equalization means both lift carriages rise at the same time, and the telescoping arms remain stable and level in the carriage.

INDUSTRIAL-GRADE HYDRAULIC CYLINDERS

Integrated into every XPR-10 Series hydraulic cylinder is a one-piece, pilot-fitted machined steel piston that is wrapped with specially designed, pressure-loaded U-cup piston seals, backups and wear bands that virtually eliminate any fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The better-designed, high-durometer, mechanically loaded rod seals make rod leakage a thing of the past, while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing that exceeds ASTM specifications.

HIGH-SPEED HYDRAULICS

Free-flow, high-pressure 3/8" hydraulic lines, high-flow pump and integrated AC power unit work together to make a speedier two-post lift.

AUTO SHUTOFF

A padded shutoff switch extends across the top of the overhead beam, automatically stopping lift movement when activated.

CHOOSE TELESCOPING LOW-PRO™ ARMS

Vehicles with hard-to-reach or uncommon lift point spreads (such as older vehicles and some electric cars) require BendPak’s Low-Pro arms. They’re perfect for sports cars and professional race cars too.

CHOOSE EXTENDED HEIGHT

If you need more headroom for your cars and trucks, the XPR-10AS-168 more easily accommodates high-rise vehicles. Even those nifty Sprinters will fit comfortable in this extended-height car lift structure.

CHOOSE CLEARFLOOR CONVENIENCE

A Clearfloor two-post lift keeps an unobstructed space below and runs all wires and hoses above. This makes moving about a little easier and protects sensitive components.

 
MODELXPR-10​AS-168
Lifting Capacity* 10,000 Lbs. / 4,536 kg.
*Max Capacity / Front Axle 5,000 Lbs. / 2,268 kg.
*Max Capacity / Rear Axle 5,000 Lbs. / 2,268 kg.
A - Height Overall: 169" / 4,293 mm.*
B - Width Overall: (NARROW) 137" / 3,480 mm .
B - Width Overall: (WIDE) 145" / 3,683 mm.
C - Width Outside of Columns: (NARROW) 133" / 3,378 mm.
C - Width Outside of Columns: (WIDE) 141" / 3,581 mm.
D - Floor To Overhead Switch: 165" / 4,191 mm.*
E - Inside Columns: (NARROW) 104" / 2,642 mm.
E - Inside Columns: (WIDE) 112" / 2,845 mm.
F - Reach (Front Arm Min.): 23-1/2" / 597 mm.
G - Reach (Front Arm Max.): 45-1/2" / 1,156 mm.
H - Reach (Rear Arm Min.): 42-1/2" / 1,079 mm.
I - Reach (Rear Arm Max.): 60" / 1,524 mm.
J - Min. Pad Height: 4.25" - 6-3/4” / 108 mm. - 171 mm.
K - Rise: 69" / 1,753 mm.
L - Max Lift Height (Pad Only): 73" - 75" / 1,854 - 1,905 mm.
M - Max Lift Height (3" Adapter): 75.5" - 77.5" / 1,917 mm. - 1,968 mm.
N - Drive-Thru Clearance: (NARROW) 94" / 2388 mm.
N - Drive-Thru Clearance: (WIDE) 102" / 2591 mm.
Screw Pad Adjustment: 2" / 51 mm.
Motor (**) 220 VAC / 60 Hz. 1Ph.
Time of full Rise: 45 Seconds
Max Load Per Arm: 2,500 Lbs. / 1134 Kg.

 

 

 

 

 

 

 

 

 

 

 Product Videos

This is my BendPak - Da Rod Shop - BendPak 2-post XPR-10A-168
  • This is my BendPak - Da Rod Shop - BendPak 2-post XPR-10A-168
    Steve, from the popular TV Show "Da Rod Shop" Tells us about h...
  • My New BendPak 2-Post Lift!
    In this episode we review, install and test our new BendPak XP...
  • BendPak New Two-Post Screw Pad Adapter Demo
    New telescoping screw pads from BendPak fit BendPak’s new 9,00...

 Warranty Information

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Find Similar Products by Tag

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak XPR-10AS 168 Extra Tall 168" Asymmetric Two Post Lift 10,000 LBS Capacity to your wish list.