Loading... Please wait...

Categories

BendPak SP-7XF Scissors Frame Engaging Lift - Flush Mount

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
BendPak
RRP: $5,290.00
$4,425.00 (You save $865.00)
SKU:
5175135
Weight:
2,318.00 LBS
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak SP-7XF  7000 LB Scissors Frame Engaging Lift - Flush Mount
You haven't experienced state-of-the-art compact lifting convenience until you've used the BendPak SP-7X. This 7,000-lb. capable lift comes loaded with an extendible, pull-out top lift platform, equalization torsion bar, hardened pivot pins, dual hydraulic cylinders and ergonomic controls. Let the SP-7X take those vehicles, and your bottom line, to new heights. BendPak LR-4A optional arm kit available.

Free Shipping Continental US
Direct shipping points only. Surcharge may apply to rural & interline points

*7,000-pound lifting capacity 
*Overall Lenght 163-1/2"
*Overal Width 74-1/2"
*Overall Height 145"
*Lifting Time 45 sec
*Lifting Height  68"
*Motor 220 VAC/1 Ph

pdf.catalog.jpg           pdf.instructions.jpg             

When you need to add versatility and productivity to your shop or garage, your first stop should always be BendPak. The SP-7X is the mighty 7,000-lb., full-rise scissor lift that won't hog your precious floorspace and fits nicely into narrower bays. A frame engaging lift, it easily accommodates most passenger vehicles and light trucks and comes complete with pneumatic safety locks, rubber lifting blocks and an open center for full under-car accessibility. Always bet on BendPak for increased durability, safety and productivity. You aren't going to find comparable quality or value anywhere else—BendPak always bests the rest. 

Electric / hydraulic power system
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.

Dual-cylinder design
Each scissor lift is equipped with 2 hydraulic cylinders for maximum performance, reliability and precise leveling. The dual-cylinder design maintains constant level and safety using cross flow hydraulic technology, pressure flow control and integrated velocity fuses. Our industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands to virtually eliminate fluid bypass. The micro-smooth chrome-rod is machined from high-yield, ground and polished C-1045/50 micro-alloy steel and plated to a minimum of .001" diametrically, to ensure superior cylinder operation and life. The superior-designed high durometer, mechanically-loaded rod seals make rod leakage is a thing of the past while a specially formulated abrasion-resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from robust steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth and last a very long time. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.

Large base frame
Heavy boxed-steel formed base frame provides solid stability. See the flush-mount dimensions here.

Flush mount dimensions for the SP-7X

    • 7,000-lb. lifting capacity
    • Pneumatic safety locks
    • Equalization torsion bar
    • Hardened pivot pins with "Z​erk" fittings
    • Open-center design
    • Ergonomic controls
    • Dual-cylinder hydraulic design provides extra power
    • Low-profile 

      floorplan2.jpg


How to choose the right car lift for you 



Safe balancing for BendPak car lifts

BendPak's Top 10 Car Lift Buyers Guide


  • Lifting capacity: 7,000 lbs. / 3,175 kg
  • Max lifting height: 68" / 1,727 mm
  • Overall length: 163-1/2" / 4,153 mm
  • Overall width: 74-1/2" / 1,892 mm
  • Lift platform: 21-1/2" x 63" / 47 mm x 1,600 mm
  • Lowered height: 5" / 127 mm
  • Width between pads: 31-1/2" / 801 mm
  • Lifting time: 45 sec
  • Motor: 208-240 VAC/50-60 Hz. 1Ph.
  • Shipping weight: 2,318 lbs. / 1,054 kg
  • Shipping dimensions: 106" x 76" x 46" / 2,692 mm x 1,930 mm x 1,168 mm

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

 Product Videos

Awesome Garages - BendPak SP-7X In-Ground Car Lift
  • Awesome Garages - BendPak SP-7X In-Ground Car Lift
    http://www.bendpak.com/car-lifts/specialty-lifts/SP-7X.aspx Ch...

 Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2017 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak SP-7XF Scissors Frame Engaging Lift - Flush Mount to your wish list.