null
BendPak

BendPak PCL-18B-2 Mobile Column Lift System Set of 2

Write a Review
SKU:
5175291
UPC:
5175291
Availability:
FACTORY SHIPPED
Shipping:
Free Shipping
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
  • BendPak PCL-18B-2 Mobile Column Lift System Set of 2
$22,285.00
$21,595.00
— You save $690.00

Description



bendpak-authorized-dealer.gif

BendPak PCL-18B-2 Mobile Column Lift System
- 2 Columns 36,000 LBS - 4 Columns 72,000 LBS -6 Columns 108,000 LBS  -8 Columns 144,000 LBS

PCL-18-2, PCL-18-4, PCL-18-6 (sold in sets of 2, 4 , 6 or 8). Each post in this super-duty portable lift system has a 18,000-lb. capacity all on its own. When you put six of them together, they are capable of pushing an incredible 108,000-lbs. worth of metal to a serviceable height of 71-1/2”.

Free Shipping Continental US 

Quick Specs

Column capacity: 18,000 lbs.
System capacity: 108,000 lbs.
Min column height: 101-1/4"
Max column height: 140-1/2"
Lifting height: 74-3/8"
Overall length: 47-1/2"
Overall width: 44"
Shipping weight:
1450 lbs. ea. column

  

 

 

 

 

 

 

 

pdf.catalog.jpg     pdf.instructions.jpg warranty-5-2-1-.-2.jpg

Mobile Column Lifts by BendPak

PCL-18B (Set of 2)

SKU# 5175291

36,000-lb. Capacity / Mobile Lift System / 208-230-190V, 50-60 Hz / 3 Ph / Set of 2


This PCL-18B mobile column lift system comes in a set of 2. When combined, the system lifts up to 36,000 lbs. A set of 2 is the perfect way to expand your lifting capabilities on vehicles with three or four axles. Sets of 4, 6 and 8 are available.

 

Set of 2 Mobile Column Lifts

With a pair (2) of mobile column lifts, you can add to your existing fleet and expand your lifting capabilities to include larger semi-trucks and heavy-duty vehicles. A minimum of 4 mobile column lifts must be used to lift a vehicle, and heavier vehicles require 6 or 8. This 2-set is a great way to gradually upgrade into the 6 or 8-lift range, offering up to 144,000 lbs. with a full set.

Do not attempt to lift half of a vehicle (the front or back only) with only 2 mobile lifts. Vehicles must be raised on an even plane at all times.

 

Features

  • 18,000-lb. individual column capacity / 108,000-lb. maximum system capacity
  • Meets or exceeds the standards prescribed by ANSI/ALI ALCTV-2011
  • Two, four, or six column configurations can accommodate heavy duty trucks and light duty passenger vehicles
  • 208-240V, 3-phase main power system - optional voltages available upon request
  • SINGLE, PAIR or TEAM operation
  • For a standard four-column set, just three 30' cables are used leaving the front or back of the lift clear of cable obstructions
  • Simple operation, long service life and minimum maintenance
  • Intuitive controls allow the lift to be fully programmed and controlled from any column
  • Control systems feature 24-volt safety circuitry
  • The PLC and main system components are standard off-the-shelf brands rather than proprietary printed circuit boards or controls, which can be very expensive to service or replace
  • Smart electronics feature self-diagnostics and self-calibration functions
  • Sealed and enclosed linear potentiometers feature precision potentiometric output and high-frequency response for precise synchronization and communication of all columns throughout all operation cycles for precise, level lifting
  • Variable height limit settings can be programmed for shops with low ceilings or when specific vehicle service requirements necessitate specific rise heights
  • Two-speed lowering option – turtle or rabbit speed settings
  • Each column is equipped with a warning light and audible alarm for critical warning alerts
  • Emergency shut-off switches on each column quickly shut off power to the lift in the event an unsafe condition is detected by the operator
  • Separate key lock enclosure on each column
  • Electronics are multi-fuse protected
  • An enclosed electric-hydraulic power system that ensures quieter operation is better suited for sound-sensitive areas
  • Pallet-jack style steering wheels enable the columns to be lowered firmly on the floor vs. constantly loaded spring-type steering wheels that can cause columns to roll when unladen by the weight of a vehicle
  • Low-mounted power units and cylinders means a lower center of gravity, making the columns easier to move and less likely to topple vs. screw-drive systems with heavy overhead motors and drive systems
  • Extended forks accommodate wide tires and deep wheel configurations
  • Multi-width wheel forks with locking pins accommodate the widest range of wheels, eliminating the need for specialty wheel adapters
  • Tandem 8” diameter polyurethane covered steel wheels with sealed roller bearings easily roll over dirt and debris
  • Heavy-duty steel carriage rollers feature turned, ground and polished axle pins
  • Manual safety override valves on each column permit the lift to be lowered in the event of a power outage without the need for manual hand cranks
  • Durable forklift pockets provide simplistic handling when moving the lift columns from one facility to another
  • Inverted hydraulic cylinders feature an integrated safety valve to prevent accidental uncontrolled lowering in the event of oil pressure loss
  • Multiple, automatic, independent safety locks spaced every four inches ensure safe operation
  • Space-saving design, reduced column weight and a tight turning radius provides improved mobility
  • Use the lift to place vehicles on tall jack stands then use the columns to raise another vehicle in an adjoining bay
  • Durable powder coat finish
 

Specifications

Lifting Capacity 18,000 lbs. (8,165 kg)
A - Overall Height (RAISED) 101” (2,565 mm)
B - Overall Height (LOWERED) 146.5” (3,721 mm)
C - Max. Lifting Height 71.5” (1,889 mm)
D - Overall Depth 48.75” (1,238 mm)
E - Overall Width 45” (1,143 mm)
F - Chassis Length 32.25” (819 mm)
G - Min. Lifting Fork Width 9.5” (241 mm)
H - Max. Lifting Fork Width 35” (889 mm)
I - Lifting Fork Length 11.5” (292 mm)
Turning Circle 40” (1,016 mm)
Column Weight 1,450 lbs. (657 kg)
Lifting Speed 85 sec Shipping Weight 1,450 lbs. (657 kg)

 

 

 

 

 

 

 

View AllClose

Warranty Information

For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability. Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first. » Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure » Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit » One Year (12-Months) Labor Warranty on site or at factory » One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
View AllClose

0 Reviews

View AllClose