Loading... Please wait...

Categories

BendPak HD-9STX Narrow & Tall 4-Post 9,000 LB Lift

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10
  • Image 11
  • Image 12
BendPak
RRP: $3,655.00
$3,055.00 (You save $600.00)
SKU:
5175862
Shipping:
Free Shipping

 Product Description


bendpak-authorized-dealer.gif
BendPak 9,000 LB  4-Post Lift HD-9STX Narrow and Tall
The HD-9STX is your 9,000-lb. rugged lifting solution if you need get something heavy up high, but you don't have a lot of space on the ground to lift it with. Perfect for vehicle storage and service—at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more.

*9,000-pound lifting capacity 
*99-3/4" Wide
*Overall Lenght 224"
*Height of Colums 100"
*Lenght of Run Ways 188"
*Max Rise 82"
*Lifting Time 45 sec.
*Motor 220 VAC/1 Ph

pdf.catalog.jpg  pdf.instructions.jpg   ali-etl-logo.jpg 5-2-1-warranty.jpg

 

 

Four-Post Lifts by BendPak

HD-9STX

SKU# 5175862

9,000-lb. Capacity / Narrow Width / High Lift


The HD-9STX is our tall and narrow four-post lift that combines a small horizontal footprint with extended-height runways, so higher-clearance vehicles can be easily parked underneath.

9stx.jpg

Capacity

Lifting Capacity*9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle4,500 lbs. (2,041 kg)

Rise

A - Min. Runway Height:4.5" (114 mm)
B - Max. Rise:82" (2,083 mm)
C - Max. Lifting Height:86.5" (2,197 mm)
Time to Full Rise:50 seconds

Outside Dimensions

D - Overall Width:100.25" (2,546 mm)
E - Outside Length:198" (5,029 mm)
F - Overall Length:224" (5,690 mm)
G - Height of Columns:100" (2,540 mm)

Inside Dimensions

H - Width Between Columns:89.75" (2,280 mm)
I - Drive-Thru Clearance:76.5" (1,943 mm)

Runways

J - Runway Width:19" (483 mm)
K - Length of Runways:188" (4,775 mm)
L - Width Between Runways:37.5" (953 mm)
M - Runway Centerline:56.5" (1,435 mm)
N - Outside Edge of Runways:75.5" (1,918 mm)

Minimum Wheelbase

Rated Capacity:135" (3,429 mm)
75% Capacity:115" (2,921 mm)
50% Capacity:95" (2,413 mm)
25% Capacity:80" (2,032 mm)

Locking

Locking Positions:15
Lock Spacing:Every 4" / 102 mm

Power Unit

Motor:220 VAC / 60 Hz. 1Ph.
Noise:45 dB

Shipping

Weight:1,992 lbs. / 906 kg
Dimensions:204" x 22" x 40" / 5,182 mm x 559 mm x 1,016 mm

Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.

Features

  • 9,000-lb. maximum lifting capacity
  • CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN-1493
  • Freestanding design
  • Narrow-width
  • High-rise
  • Perfect for parking, storage and service
  • Runways accommodate narrow and standard vehicles
  • Runways include rail-kit for optional accessories
  • Electric / hydraulic power system
  • Single hydraulic cylinder mounted underneath runway
  • Fully enclosed lifting cables, safety locks and sheaves
  • Internal anti-sway slider blocks in each column
  • Oversized self-lubricating cable rollers
  • Features heavy-duty 3/8" aircraft cable
  • Rugged 1.25" roller axles
  • Multi-position safety locks in each column
  • Adjustable lock ladders
  • Runways feature non-skid surface
  • Push-button pneumatic safety release
  • Independent backup slack-cable safety latches
  • Customizable power unit location
  • Removable approach ramps for additional drive-under clearance
  • Longer approach ramps for low-ground clearance vehicles
  • Optional drive-thru ramps available
  • Optional drip trays available
  • Optional solid deck available to increase storage capacity
  • Optional 4,500-lb. air / hydraulic rolling jacks available (Model RJ-45)
  • ETL Approved

 

More Height in Less Floor Space

The HD-9STX is your 9,000-lb. rugged lifting solution for when you need get something heavy and high, but you don't have a lot of space on the ground. Perfect for vehicle storage and service—in the shop or garages with high ceilings. Whether you're a service professional or a DIY'er, BendPak’s got the right lift for you. This model is available with optional casters, drip-trays, jack platform and more.

With more height to work with, this lift does something others do not: it fits trucks and SUVs in the lower level. This is essential for parking purposes, especially if your lower-level vehicle is too heavy for the runways. A high-rise lift also increases the comfort of techs working underneath. Pulling transmissions and draining oil is safer and easier on  high-rise car lift. The HD-9STX eliminates stooping and awkward straining when accessing the vehicle underbody. When you’re uncomfortable, you’re more likely to make mistakes, and there’s nothing better than a car lift that lifts to the perfect height. The HD-9STX maximizes versatility in a car lift that adapts to your height and lifestyle. The narrow designs fits in the same floor space as the HD-9ST but requires a bit more ceiling height to fully enjoy.

 

 

 

 Product Videos

Lotus Elise on BendPak HD-9
  • Lotus Elise on BendPak HD-9
    http://www.bendpak.com/car-lifts/four-post-lifts/HD-9.aspx The...
  • BENDPAK 4 POST LIFT HD-9 CASTER KIT REVIEW
    To see more tool reviews, and participate in workshop discussi...
  • BendPak RJ-45 Rolling Bridge Jacks for HD-9 Four Post Lifts
    To see more tool reviews, and participate in workshop discussi...

 Warranty Information

Better Products – Better Service – Better Value
For more than a decade, America’s best lift has been coupled with the best warranty in the business. Instead of hiding behind a long veil of marketing fluff, we’re proud to deliver our warranty up front for all to see. To make sure we deliver our customers lifting products worthy of our 5-2-1 warranty, we developed our Design-Build-Quality-Deliver directive. This Zero-Tolerance for Defects initiative combined with our 5-2-1 Warranty is BendPak’s way of backing up what we claim. We employ a dedicated team of design engineers who are responsible for detecting and correcting any issue no matter how small before it gets to the customer. Five years is a long time, so we’ve got to get it right before we ship. The best warranty in the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability and reliability.

Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.

» Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
» Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
» One Year (12-Months) Labor Warranty on site or at factory
» One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance

Click here for full details.

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

Categories

Business Info

newsletter

Payments Accepted

Copyright 2018 MyToolEquipmentGuy Tel. 203-813-0414 (Direct) or Toll Free 877-572-8298. All Rights Reserved.
Sitemap | Bigcommerce Premium Themes by PSDCenter

Click the button below to add the BendPak HD-9STX Narrow & Tall 4-Post 9,000 LB Lift to your wish list.